PVA 섬유 보강 시멘트 복합체는 매우 복잡한 미세구조를 가지고 있으며, 재료의 거동을 정확히 평가하기 위해서는 미세구조 특성 을 반영하여 실제 실험과 시너지효과를 내며 효율적인 재료 설계를 가능하게 하는 해석 모델의 개발이 중요하다. PVA 섬유 보강 시멘 트 복합체의 역학적 성능은 PVA 섬유의 방향성에 큰 영향을 받는다. 그러나 마이크로-CT 이미지로부터 얻은 PVA 섬유의 회색조 값 을 인접한 상과 구분하기 어려워, 섬유 분리 과정에 많은 시간이 소요된다. 본 연구에서는 섬유의 3차원 분포를 얻기 위하여 0.65μm3 의 복셀 크기를 가지는 마이크로-CT 이미지 촬영을 수행하였다. 학습에 사용될 학습 데이터를 생성하기 위해 히스토그램, 형상, 그리 고 구배 기반 상 분리 방법을 적용하였다. 본 연구에서 제안된 U-net 모델을 활용하여 PVA 섬유 보강 시멘트 복합체의 마이크로- CT 이미지로부터 섬유를 분리하는 학습을 수행하였다. 훈련의 정확도를 높이기 위해 데이터 증강을 적용하였으며, 총 1024개의 이미지 를 훈련 데이터로 사용하였다. 모델의 성능은 정확도, 정밀도, 재현율, F1 스코어를 평가하였으며, 학습된 모델의 섬유 분리 성능이 매 우 높고 효율적이며, 다른 시편에도 적용될 수 있음을 확인하였다.

PURPOSES : The purpose of this study is to experimentally analyze the flexural strength characteristics of cement mortar mixtures simultaneously incorporated with graphene oxide (GO) and polyvinyl alcohol (PVA) fibers, and to understand the composite effect of those on enhancing resistance against the initiation and progression of micro-cracks, as well as the control of macro-cracks in flexural behavior. METHODS : Cement mortar(w/c=0.5) specimens for flexural strength test, mixing 6 mm and 12 mm PVA fibers at 1% and 2% volume ratios, were fabricated. Additionally, specimens incorporating GO at a cement weight ratio of 0.05% were prepared for each mixture to analyze the effect of GO. Therefore total eight types of mixture were prepared. The fabricated specimens were subjected to flexural strength tests after curing in waterbath for 7 and 28 days. Concurrently, digital images for analyzing deformation in accordance with loading history were obtained at a rate of 20 Hz using the DIC technique. Through displacement and strain calculation via DIC, the flexural behavior characteristics of the mixtures combined with GO and PVA fibers were precisely analyzed. Furthermore, the composite effect on flexural behavior characteristics when GO and PVA fibers are incorporated was discussed. RESULTS : For the PVA fiber-reinforced cement mortar mixture, the incorporation of 0.05% GO increased the crack initiation load by up to 23%, and the maximum resistive load after cracking by up to 24%. Moreover, introducing GO into the PVA fiber-reinforced mixture increased the flexural strain just before cracking by approximately 30 to 50%, while the maximum resistive load after cracking exhibited similar strain levels with or without GO incorporation. Therefore, under flexural behavior, the integration of GO might delay crack initiation by increasing the strain concurrent with the rise in flexural stress before crack occurrence. It also seems to contribute to reducing crack expansion by synergistically interacting with PVA fibers after crack occurrence. CONCLUSIONS : It was experimentally examined that the flexural strength of PVA fiber reinforced cement mortar is improved by incorporating GO. Moreover, GO enhances resistance of crack occurrance and reduces crack propagation in combination with PVA fibers. This study suggests that simultaneous incorporation of GO and PVA fibers can synergistically improve the performance of cement composites.

In this paper, the hybrid prefabricated retrofit method is suggested and examined. Six specimens were manufactured in order to evaluate their flexural performance of RC beams. Test parameters include the added beam depth, the thickness of bottom plate, the number of the steel plate with openings. The effects of these parameters on the flexural performance of reinforced concrete beams were examined. The load-deflection behavior and modes of cracks are presented from the test results. At the test result, the flexural capacity and the ductility of the hybrid prefabricated retrofit method was increased satbly. Also, comparing the flexural performance of RC beam and retrofitted RC beams, it was increased that the flexural strength is about 3.3 times, the ductility is about 2.55 times, and energy dissipation capacity is about 7.34 times.

In this paper, the hybrid prefabricated retrofit method that improve structural performance and reduce construction period was developed by using a finite element analysis. The hybrid prefabricated retrofit method consist of a Z-shaped side plate, a L-shaped lower plate, and a bottom plate containing an steel plate with openings. This shape has advantage that a retrofit method is possible regardless of the size of the beams and a follow-up process such as reinforcement bars placing are not required. The finite element analysis of hybrid Prefabricated retrofit method showed the most ideal stress distribution when the thickness of bottom plate was 10mm, the thickness of the L-shaped lower plate was 5mm, the thickness of the Z-shaped side plate was 2.5mm, and the bolt spacing was 200mm. The bending strength equation of Hybrid prefabricated retrofit method was proposed through the plastic stress distribution method in KDS 41 31 00. The result of Comparison the proposed equation with the finite element analysis, it is determined that the design of hybrid prefabricated retrofit method is possible through the KDS 41 31 00.

This paper is a case study to demonstrate the applicability of a new horizontal jet grouting construction technology to from a ring of improved ground around the tunnel periphery which will guarantee the stability and impermeability of the opening using dual-rod, called Twin-Jet. Normally, the soil-cement admixture after the mixing in a fluid state, which will flow out from the horizontal hole. For the purpose to solving this crucial problem, Twin-Jet technology was invented to solidify soft soil and fractured rock instantly. The fundamental principles of the Twin-Jet method are introduced and sodium silicate(water-glass) is selected as the binder to accelerate the hardening process of an admixture of grout and soil under high pressure of about 10 to 40MPa to create the instant solidification. A filed test was conducted in the tunnel at OOO in Pusan. Field and laboratory results showed that the admixture can be quick gelled within 10 to 20 seconds. The diameter of jet-grouted column reached 0.6 meter and the strength after 28 days reached 2.0MPa.

철근콘크리트 슬라브의 휨강도 보강을 위해 제안된 섬유보강폴리머(Fiber Reinforced Polymer, FRP)와 초 고거동 콘크리트(Ultra High Performance Concrete, UHPC)의 합성구조의 파괴 시 거동을 살펴 본 결과, 과다한 휨 보강으로 인한 전단파괴와 보강된 FRP의 탈착에 의한 파괴가 발생하였다. 전단강도와 휨 강도의 크기를 고려한 설계 기준을 제시하여 휨 보강 한도를 제한하고, 전단 철근을 추가하여 탈착에 의한 파괴를 보강하였다. 휨 강도의 보강을 제한 하고 부착 철근이 보강된 슬라브의 실험 결과, 휨에 의한 연성파괴가 유도되었다.

This study proposes flexural failure design criteria of continuous slabs enhanced by a hybrid system of fiber reinforced polymer (FRP) and ultra high performance concrete (UHPC). The proposed hybrid retrofit system is designed to be placed at the top surface of the slabs for flexural strengthening of the sections in both positive and negative moment zones. The enhancing mechanisms of the proposed system for both positive and negative moment regions are presented. The neutral axis of the enhanced sections in positive moment zone at flexural failure is enforced to be in UHPC overlay for preventing the compression in FRP. From this condition, a relationship between design parameters of FRP and UHPC is established. Although the capacity of the proposed retrofit system to enhance flexural strength and ductility is confirmed through experiments of one-way RC slabs having two continuous spans, the retrofitted slabs failed in shear. To prevent this shear failure, a design criteria of flexural failure is proposed.

This study proposes a hybrid system of fiber reinforced polymer (FRP) and ultra high performance concrete (UHPC) to enhance flexural strength of existing reinforced concrete (RC) slabs. The proposed system is designed to be placed at the top surface of the slabs for flexural strengthening of the sections in both positive and negative moment zones. The enhancing mechanisms of the proposed system for both positive and negative moment regions are presented. Moreover, to prevent the compression in FRP of the enhanced sections in positive moment zone at flexural failure, neutral axis of the sections at failure is enforced to be in UHPC overlay. From this condition, a relationship between design parameters of FRP and UHPC is established.

The interest for the stability of the structures against earthquake, which is increasing recently, is rapidly increasing. But, currently, school buildings among the reinforced concrete(RC) structures in Korea are not designed with seismic design or there are many cases of being designed with the old seismic design code, so it is estimated to have not only lives but also a great deal of economic damage are likely to occur when an earthquake occurs. In this study, proposed horizontal friction system(HFS) with rotary friction damper installed as a method to reinforce strength and hardness and to increase ductility for the low story structure of 5 stories or lower such as school buildings. For the seismic retrofitting design with horizontal friction system in which rotary friction damper is installed, Peak displacement response ratio according to elastic and inelastic behavior and ductility demand is calculated to decide elastic stiffness and strength of the HFS, design model and procedure to decide the capacity of HFS thereof is decided, and the feasibility and performance are reviewed through pushover analysis.

본 연구에서는 교량의 내진보강방안을 합리적으로 결정하기 위하여 기존교량 및 보강된 교량의 지진하중에 대한 손상가능성을 이용하여 보강에 따른 내진성능 향상효과를 분석하였다. 교량의 내진보강에 따른 효과는 기존교량 및 보강된 교량에 대해 평가된 보강우선순위의 변화를 통하여 분석하였다. 이를 위하여 본 연구에서는 선행적으로 교량의 사용수명동안에 발생가능한 지진하중에 의한 지진취약부위의 손상확률과 손상으로 인해 예상되는 총 손실비용에 근거한 지진취약부위별 가중치를 이용하여 교량별 내진보강 우선순위를 결정할 수 있는 평가기법을 제안하였다. 제안된 평가기법의 타당성을 검증하기 위하여 다른 형식을 갖는 4개의 PSC 거더교를 대상으로 내진보강 우선순위를 평가하였다. 또한 각 지진취약부위별로 내진 보강된 교량에 대해 재평가된 순위지수를 기존교량에 대해 평가된 결과와 비교함으로써 각 교량별로 적용된 보강기법의 적합성을 검토하였다. 기존교량 및 보강된 교량에 대한 모의분석결과로부터 적용된 보강방안에 따라 해당취약부위의 손상가능성은 상당히 감소될 수 있으나 반면에 인접한 지진취약부위의 손상가능성은 증가되는 경향을 보이는 것으로 나타났다. 그러므로 기존교량에 대한 합리적인 보강방안을 결정하기 위해서는 내진보강에 따른 교량의 전체적인 거동특성변화에 따른 보강효과분석이 필수적으로 요구되며, 이는 본 연구에서 제안한 내진보강 우선순위 평가기법에 따라 기존교량 및 보강된 교량의 보강우선순위를 평가, 비교함으로써 효과적으로 수행될 수 있는 것으로 분석되었다

본 연구에서는 기지개와 미시구멍으로 구성된 복합재료에 입자보강 복합재료의 등가 재료상수 예측기법인 평균장 근사이론과 등가원리를 적용하여 위상 최적화에 필요한 등가 재료상수와 설계변수와의 상관관계식을 유도하였다. 또한, 유도된 관계식에 중간값을 갖는 설계변수의 수를 줄이기 위하여 벌칙인자를 도입하였다. 그리고 본 연구의 타당성을 검증하기 위하여 벌칙인자가 도입된 위상 최적화문제를 순차이차계획법인 PLBA 알고리즘을 이용하여 해석하였다.

1980년대에서 1990년대 중반까지 건설된 노후 공동주택 단지의 주차장 부족 현상은 심각하다. 노후 공동주택의 주차장 확대 사례 를 살펴보면 수직으로 지하 주차장을 확장하는 방식이 대부분을 차지하고 있다. 기존 건축물을 증축할 경우 기초의 구조적 안전성 확보는 매우 중요하며, 지하 수직방향 공사의 경우 작업 공간이 협소하기 때문에 안전성, 환경성 및 시공성이 우수한 공법을 적용해야 한다. 도심지 공사는 소음과 진동이 작은 공법과 장비의 사용도 필수적이다. 이 연구는 지하주차장 확대 공사에 필요한 기초보강 공법 선정에 영향을 미치는 요인을 분석하고 영향요인의 가중치를 산정하여 기초보강공법의 적용성을 분석 할 목적으로 수행되었다. 기초보강 공법의 적용성에 영향을 미치는 요인은 전문가 면담조사를 통하여 도출하였고, AHP기법을 통하여 영향요인의 가중치를 산정하였다. 전문가를 대상으로 기초보강 공법의 적 용성을 평가 하였다. 2건의 지하주차장 확대 유형에 대한 사례연구를 실시하여 기초보강공법의 적용성을 비교 분석하였다.

In this study a seismic retrofit scheme for a reinforced concrete shear wall structure using steel slit dampers was presented. The stiffness and the strength of the slit damper used in the retrofit were verified by cyclic loading test. Genetic algorithm was applied to find out optimum location of the slit dampers. The effects of the slit dampers on the seismic retrofit of the model were compared with those of jacketing shear walls. The seismic performance of the model structure with optimally positioned slit dampers was evaluated by nonlinear static and dynamic analyses. Based on the analysis results, the simple procedure for determining required damping ratio using capacity spectrum method along with the damper distribution pattern proportional to the inter-story drifts was validated.

In this study, repair and reinforcement priority of dam facilities was estimated using dam in-depth inspection assessment score and grade. Multi-Criteria Decision Making was used for decision of priority, and assessment scores and weights of individual facilities were applied as payoff matrix and weight coefficient. The results show that different analysis results can be deducted by various MCDM method even if assessment index and weight coefficient are the same.

The Brace retrofit system tends to be used to reinforce the non-seismic designed buildings. This study conducted several static tests to verify structural performance of the brace retrofit system. Using its resultant data, this study will propose the problems and improvements of the brace retrofit system.

The Brace retrofit system tends to be used to reinforce the non-seismic designed buildings. This study conducted several static tests to verify structural performance of the brace retrofit system. Using its resultant data, this study will propose the problems and improvements of the brace retrofit system.

폴리비닐알코올 섬유와 폴리에틸렌 섬유 등의 합성 섬유는 고연성 섬유보강 시멘트 복합재료를 제조하는데 성공적으로 사용되고 있다. 폴리프로필렌 섬유 역시 복합재료를 제조하는데 사용되고 있지만, 고연성을 구현하는 목적보다는 고온에 노출된 콘크리트의 내화 성능 향상 목적으로 사용되고 있다. 이 연구에서는 폴리프로필렌 섬유로 보강된 시멘트 복합재료의 성능을 향상시키는 방법에 대하여 논하고자 한다. 폴리프로필렌 섬유보강 시멘트 복합재료의 성능을 평가하기 위하여 5가지 배합을 결정하였다. 1종 보통포틀랜드시멘트 (OPC)와 OPC를 다량 치환한 플라이애시를 결합재로 사용하였고 물-결합재 비는 0.23~0.25이다. 또한 부피비로 2%의 폴리프로필렌 섬유가 사용되었으며, 연성을 향상시킬 목적으로 폴리스틸렌 비드가 사용되었다. 슬럼프, 밀도, 압축강도, 1축 인장 실험을 포함한 일련의 실험을 수행하였으며, 실험결과, 파괴역학, 마이크로역학, 통계이론을 이용하여 폴리프로필렌 섬유보강 시멘트 복합재료의 성능을 향상할 수 있는 것으로 나타났다.