V-type coupling, which is often applied to wastegate-turbochargers(WGT), is a mechanical fastener. Its radial forces generated from the bolt pretension load colse contact with each other to the axial direction for turbine housing and center housing rotating assembly(CHRA). In addition, the torsional stiffness between two bodies should be sufficiently secured to minimize the linkage angle change from the EWGA to the valve spindle. Therefore, in this study, the torsional stiffnesses according to the effects of positioning pins and friction coefficient, and the bolt pretension loads were calculated for V-coupling turbocharger. As a result, it can be seen that the torsional stiffness of the coupling according to the number of position pins is very small. And, when the friction coefficient and the axial force of the bolt are large, the torsional stiffness is greatly increased, and gradually decreasing when the bolt load of the coupling is about 6,000 N or more.

In the case of a school building, even though it is a regular structure in terms of plan shape, if the masonry infill wall acts as a lateral load resisting element, it can be determined as a torsionally irregular building. As a result, the strength and ductility of the structure are reduced, which may cause additional earthquake damage to the structure. Therefore, in this study, a structure similar to a school building with torsional irregularity was selected as an example structure and the damping performance of the PC-BRB was analyzed by adjusting the eccentricity according to the amount of masonry infilled wall. As a result of nonlinear dynamic analysis after seismic reinforcement, the torsional irregularity of each floor was reduced compared to before reinforcement, and the beams and column members of the collapse level satisfied the performance level due to the reduction of shear force and the reinforcement of stiffness. The energy dissipation of PC-BRB was similar in the REC-10 ~ REC-20 analytical models with an eccentricity of 20% or less. REC-25 with an eccentricity of 25% was the largest, and it is judged that it is effective to combine and apply PC-BRB when it has an eccentricity of 25% or more to control the torsional behavior.

국내의 서비스 수준 지진(SLE)과 최대 고려 지진(MCE)의 두 RC 건물 구조물의 실험 및 해석 결과에서 얻은 탄성 및 비탄성 응답은 비틀림에 대한 전단 및 비틀림 거동에서 저항 메커니즘의 특성을 연구하는데 사용될 수 있다. 불균형 구조의 특성 연구에서는 전단력 및 비틀림 모멘트에 대한 병진 변형 및 비틀림 변형의 상호 작용 효과를 나타내는 방정식이 제안하였다. 탄성과 비탄성 거동에서 힘과 변형 사이에 상관 관계 유무가 다르기 때문에 증분 전단력과 증분 비틀림 모멘트를 최대 벽 프레임 변형을 중심으로 항복, 제하 및 재 하중 단계로 구분하여 해당 증분 변형 및 증분 비틀림 변형 측면에서 해석을 수행하였다. 두 가지 주요 지배 모드의 탄성 조합에서 병 진 변형은 주로 전단력에 기여하는 반면 비틀림 변형은 전체 비틀림 모멘트에 크게 기여한다. 그러나 비탄성 응답에서는 증분 병진 변 형이 증분 전단력과 증분 비틀림 모멘트 모두에 기여하게 된다. 따라서 주어진 방정식을 이용하여 비탄성 응답에서 비틀림의 편심 감 소, 비틀림 강성 저하 및 겉보기 에너지 생성과 같은 모든 현상들을 설명하였다.

Currently, the construction trend of high-rise structures is changing from a cube-shaped box to a free-form. In the case of free-form structures, it is difficult to predict the behavior of the structure because it induces torsional deformation due to inclined columns and the eccentricity of the structure by the horizontal load. For this reason, it is essential to review the stability by considering the design variables at the design stage. In this paper, the position of the weak vertical member was analyzed by analyzing the behavior of the structure according to the change in the core position of the twisted high-rise structures. In the case of the shear wall, the shear force was found to be high in the order of proximity to the center of gravity of each floor of the structure. In the case of the column, the component force was generated by the axial force of the outermost beam, so the bending moment was concentrated on the inner column with no inclination.

In this paper, a twisted shape structure with an elevation form favorable to the resistance of vibration caused by wind loads is selected from among the forms of high-rise buildings. The analytical model is a square, triangular, and hexagonal plane with a plane rotation angle of one degree from 0 to 3 degrees per each story. As a result of the analysis, as the twist angle increased, story drift ratio is increased. Responses with different eccentricity rates were shown by analytical models. Therefore planar shapes designed symmetrically to the horizontal axis of X and Y are considered advantageous for eccentricity and torsion deformation. In the case of the bending moment of the column, the response was amplified in the column supporting the base floor, the roof floor, the floor in which the cross-section of the vertical member changes, and the floor having the same number of nodes as the base floor. Finally, the axial force response of the column is determined to be absolutely affected by the gravity load compared to the lateral load.

본 논문에서는 CAD 시스템에서 사용하는 NURBS 기저함수를 사용하는 아이소-지오메트릭 해석(Isogeometric analysis) 방법과 기 하학적으로 엄밀한 빔 모델링(geometrically exact beam model)을 활용하여 회전과 병진 운동이 결합된 새로운 형태의 메타물질 (metamaterial)에 대한 해석을 진행하였다. 이차원 셀 구조는 자유형상변환(Free-form deformation) 법과 적절한 내삽법(Interpolation) 을 통해 원통 위에 입혀졌다. 원통의 치수와 셀 개수가 비틀림 각도에 미치는 영향이 매개변수 연구(parametric study)를 통해 확인되었 다. 비틀림과 병진 운동이 결합된 구조의 메커니즘에 대해 수치 예제를 통해 알아보았다.

In this study, algorithms for analyzing the torsion of buildings under earthquake excitation are developed. The algorithm and formulations to account for the torsional angle are verified by analyzing the seismic acceleration time history data. The method was applied to the reference buildings to examine their operation and usability. The reference application demonstrated that the noise-canceling scheme successfully overcame various obstacles in the field measurements. The developed method is expected to be used as a tool to support a loss assessment system for determining the direction and priority of disaster response in the event of an earthquake.

이 연구에서는 국내 설계기준인 KBC 2016, 미국 기준 ASCE 7-16, 국제 표준 ISO 4354:2012의 풍직각방향 및 비틀림 풍하중을 비교 분석하였다. 고층건물 설계를 위한 상세 산정식과 그 적용 기준, 풍하중 하중조합 등을 비교하였다. KBC는 ISO와 유사한 유도과정을 가지지만, 풍직각방향 풍하중 산정 시 사용된 풍동실험 데이터의 차이로 인해, 변장비가 큰 경우 와류 재부착에 의한 파워 스펙트럼의 2차 피크를 ISO가 약간 크게 산정하고 구조물과의 공진으로 인해 ISO가 하중을 60% 정도 크게 산정한다. KBC와 ISO의 고층건물에서의 비틀림 풍하중은 동일하다. ASCE는 고층건물을 위한 상세식을 제시하지 않지만, 중저층 건물에서는 풍방향 하중에 비례하는 하중조합 형태로 반영한다. KBC와 ISO에서도 ASCE 처럼 중저층 건물에서 편심에 의한 비틀림 풍하중을 반영할 필요가 있다.

The structural performance of a vehicle can be evaluated by the static and dynamic structural analyses which predict the amount of deformation, stiffness. And the static analysis should be done first. Another important aspect to be considered in the design process is crashworthiness, because a structurally sturdy vehicle body may be overdesigned with excessive strength and durability standards. The ideal condition of a body structure is to absorb impact load at a certain level of local deformation, to distribute the load to each structure adequately, and to prevent excessive stress concentration and deformation. This paper is the result of the consideration of automotive body, bending and torsional stiffness for structure stiffness estimation of automotive body through finite element modeling.

본 연구에서는 비틀림 설계가 되지 않은 철근콘크리트 보의 비틀림 거동에 대하여, 폐쇄스터럽의 강도와 간격에 따른 거동 특성을 실험을 통하여 평가하였다. 그리고 비틀림 거동 시 폐쇄스터럽의 간격에 따른 종방향 철근의 거동특성을 분석 하였다. 실험결과 비틀림 설계가 되지 않은 철근 콘크리트 보의 경우 폐쇄스터럽의 강도는 비틀림 강도에 영향이 작은 것으로 나타났다. 그리고 비틀림 설계가 되지 않은 단면의 경우, 부재의 균열 비틀림 모멘트에 안전율을 고려하여 부재의 비틀림 강도를 간접적으로 평가할 수 있을 것으로 판단된다. 종방향 철근이 균열 억제 및 비틀림에 의한 인장력에 저항하기 위해서는 폐쇄 스터럽의 간격이 중요한 영향을 미치는 것으로 나타났다.

Beam bracing is applied to prevent the relative displacement of the top and bottom flanges or to effectively control the twisting of the section, and the lateral stability of the beams are provided by lateral bracing, torsional bracing or a combination of both. Modular steel I-girders are laterally interconnected by torsional bracings that are installed to increase the resistance to lateral torsional buckling. In this paper, numerical parametric study was carried out by varying the crossbeam web height to examine the effects of the web torsional stiffness. Three-dimensional finite-element analysis using the commercial finite element software ABAQUS was obtained for the parametric numerical analyses of a series of feasible two-girder models, and the failure mode, lateral-torsional buckling strength and the moment-displacement behavior of the main girders was determined.

This study examines the seismic failure of RC low-rise building structures having irregularities at the ground story during the 15 November 2017 Pohang, Korea, earthquake, Mw = 5.4, which is the second strongest since the government began monitoring them in 1978 in South Korea. Some 2,000 private houses were damaged or destroyed in this earthquake. Particularly, serious damage to the piloti story of RC low-rise residential building structures of fewer than five stories was observed within 3 km of the epicenter with brittle shear failure of columns and walls due to severe torsional behavior. Buildings below six stories constructed before 2005 did not have to comply with seismic design requirements, so confinement detailing of columns and walls also led to inadequate performance. However, some buildings constructed after 2005 were damaged at the flexible side of the piloti story due to the high torsional irregularity. Based on these results, this study focuses on the problems of the seismic torsion design approach in current building codes.

본 연구에서는 5층에 설치된 능동질량감쇠기를 사용하여 5층 철골구조물의 처음 세 개 모드의 모드 특성을 식별하였다. 이 건물은 병진모드와 비틀림모드의 고유진동수가 매우 근접하며, 이 경우 정확한 모드 분리와 모달 파라미터 식별은 매우 어렵다. 사인 하중 가진실험을 수행하여 모드 진동수, 감쇠비, 질량, 모드형상을 식별하였고, 근접한 모드 응답을 분리하였다. 식별된 시스템은 동일 한 입력신호를 사용하여 측정된 구조물의 응답과 매우 근접한 응답을 추정할 수 있다.

This study investigates the torsional behavior within the geometric range of the curved PSC bridge designed and constructed in the recent work. Compared with the design specifications for torsion on the Korean Highway Bridge Design Specification(2010), the reasonable torsional reinforcement design criteria are reviewed and proposed for curved PSC girder. A numerical study investigates the torsional behavior of a curved PSC box girder. From the study on the geometrical shape of the curved beam and the torsion caused by the eccentric load of the vehicle load in this study, the following results were derived: the design criteria for diaphragm and crossbeam as presented in the current Korean Highway Bridge Design Specifications (2010 & 2015) are based on the single PC box bridge applied by the FCM or ILM method, therefore the criteria is very conservative about the multi-box girder bridge type bridge in this study.