PURPOSES : Carbon dioxide (CO2) is a cheaper and easier to installer fire suppressant than other extinguishing gases and is easy to install, but extinguishes fires by is suffocation. As a result, suffocation accidents continue to occur in facilities equipped with CO2 fire-extinguishing facilities, Emission standards have yet to be established. This study aims to address the issue. METHODS : To effectively remove CO2 emitted from installed systems, we reviewed and analyzed previous related research and existing international standards. RESULTS : In protected areas where CO2 fire-extinguishing systems are installed, emission facilities should discharge the emitted CO2 before it enters the protected spaces. CO2 sensors can determine whether safe entry is possible or whether respirators are required. CONCLUSIONS : This study presented a specific installation method for emission facilities capable of actively discharging CO2. Applying this method is expected to contribute to improving safety in facilities equipped with CO2 fire-extinguishing facilities.

In this study, according to the staking method of the fire hose in the indoor hydrant system, the number of kinks when the fire hose is deployed was measured and analyzed to examine how the staking method of the fire hose affects the kink when the hose is deployed. The fire hose staking method was classified into three types: donut-type, accordion-type, and hose hanger-type, and the walking speed and number of kinks were measured by repeating the experiment 5 times for male and female students. The results of the study are as follows. (1) Among the three types of fire hose staking methods, the donut-type staking method had an average of 92 times for male students and 86 times for female students on average. (2) The accordion-type and hose hanger-type staking methods showed similar results with an average of one or two kinks for both male and female students. (3) Regardless of the staking method, it was found that in general, male students with high walking speed had more kinking than female students with slow walking speed.

In this study, the purpose of this study was to examine the effect of twisting in the preparation of waterproofing in the process of unfolded donut-type staking method fire hoses in indoor hydrant system. The central pull-out method caused more twisting than the rolling method, and there was no significant difference in the number of twists according to the pull-out method in the case of male and female students. It was found that the time it took to untwist and prepare waterproofing was much shorter for male students. The angle valve and hose are connected, and the time to untwist and prepare for waterproofing after withdrawing the fire hose with the hose and nozzle connected was shorter than the unconnected state. In the rolling method, when a hose connected with two 15 m fire hoses was used and the angle valve-hose was connected, but the hose-nozzle was not connected, the least kinking occurred. The time to untwist and prepare for waterproofing was also the shortest. As a result, in the withdrawal method of the donut-type loaded fire hose in the indoor hydrant system, it is a rolling method rather than a central withdrawal method. With the angle valve and hose connected, unfold the fire hose with the hose and nozzle connected, if a large number of people unwind the twisted hose, the time to prepare for waterproofing can be shortened.

청정소화약제는 지구오존층 보호를 위해 발효된 몬트리올 의정서에 따라 할론 1211 및 할론 1310을 대체할 수 있는 약제를 말한다. 국·내외적으로는 청정소화약의 시스템 표준화와 성능평가가 수행되고 있다. 본 논문은 일반적인 청정소화약제 시스템을 바탕으로 다양한 노즐의 형상에 대한 모델링 및 수치해석을 수행하여 최적의 노즐 형상을 제안하였다. Type A와 B의 2가지 형상에 대한 노즐의 3차원 모델링을 통해 노즐의 분출속도가 개선될 수 있도록 하였다. 2가지 형상의 노즐에 대하여 유동해석을 실시하였으며 노즐의 홀 직경을 다르게 하여 가스속도 및 압력분포를 측정하였다. 측정결과 노즐 홀 수 및 직경에 따라 노즐출구에서 분출속도가 달라지는 것을 확인할 수 있었으며 노즐 홀 직경에 관계없이 유량은 압력이 증가함에 따라 증가하는 경향을 나타내었다. 실험을 통해 얻어진 결과를 바탕으로 노즐 직경이 5 mm인 경우의 K-factor값이 101.8 l/min·bar-0.5임을 확인하였으며, 최종적으로 노즐 홀 5 mm인 12개의 홀이 2층 구조로 되어있는 형상의 노즐을 제안하였다.

Pumps for hazardous materials handling areas of self service stations are still scattered in the country, generator room, engine room of the small vessels, etc. are installed inside buildings against big is the risk of fire extinguishers are installed only. These facilities are in severe climate change because it is an open space area, as well as a water based fire extinguishers may not be suitable for that type of gas extinguishing system is also adaptable. This study features a compressed air port operation principles and characteristics, equipment, fire extinguishers, which can minimize the casualties and property losses from fire against hazardous substances in small business, design requirements, domestic contain fire extinguishers laws and foreign Compression Four fire extinguishers through the air and foreign regulations comparative analysis of the compressed air port installations such as fire extinguishers and applied to study the measures to be included are fire extinguishers installed in the country. Climate change is a big country review In winter, water based fire extinguishers are also concerned about the freeze, but compared to the foreign installations were exploring ways to work in the country. CAF is especially preferred that the fire extinguishing performance and to demonstrate the protective space as there is a risk of frost risk significantly less compressed air port digestion plant.

본 연구에서는 진동대 실험을 통한 수계형 소화설비의 내진성능평가를 실시하였다. 실험에 사용된 수계형 소화설비 시설에는 일반 배관, 내진형 배관, 펌프 등 이다. 그리고 수계형 소화설비 시설의 동적거통특성을 파악하기 위하여 El-Centro 지진파 50%,70%, 100%, 120% 수준의 가진을 가하였다. 그 결과, 내진형 설비보다 일반형 설비에서 변위 응답과 가속도 응답이 큰 것으로 보아내진형 설비가 일반설비에 비해 내진성능이 우수하다는 것을 알 수 있었다. 또한, 가진 수준별 가속도 응답스펙트럼을 통하여 일반형시설과 내진형 시설의 성능 평가뿐만 아니라 작은 규모의 지진에서도 일반형 설비의 파괴가 일어날 수 있다는 것을 알 수 있었다. 본연구를 통해 수계 소화설비의 내진성능을 평가 할 수 있었고 수계 소화설비의 내진성능 기준을 검증할 수 있었다.

In this study, the shake table tests were performed for seismic performance evaluation of fire protection riser pipes. The specimen was subjected to a tri-axial time history shake table test with acceleration levels corresponding to the 0.5g and 0.7g ZPA design level.

The purpose of this study was to improve low digestibility in anaerobic digestion facility of the sewage treatment plant. To perform this research, sludge digestion and digestion gas purification facilities in sewage treatment plant was applied. In the result of this study, it was very effective for sludge reduction from the improvement of digestive efficiency. In addition, it was confirmed that high purity CH4 (methane) was produced. This results can be useful as basic data to improve the low digestibility in anaerobic digestion processes.

지진 피해 상황을 살펴보면 중소 규모의 지진이 발생하였을 때 구조물의 붕괴에 의한 직접적인 피해가 아닌 화재와 같이 소화 설비, 전력설비, 통신설비 등 주요 기간설비의 기능상실로 인한 피해가 많이 일어나고 있다. 이와 같은 2차 피해를 줄이기 위해 소화설비의 내진설계는 반드시 필요하다고 할 수 있다. 본 연구에서는 수계소화설비의 내진성능 평가를 위하여 골조 구조물에 옥내소화전설비(배관, 펌프, 수조, 소화전)를 설치하여 진동대 실험을 실시하였다. 그리고 일반시설물과 내진시설물의 거동차이를 확인하기 위하여 각 설비는 기존 건축물에 시공되어 온 일반형 시설물과 내진형 시설물을 동시에 시공하여 시험을 수행하였다. 또한, 시설물의 거동특성을 파악하기 위하여 시설별 변위응답, 가속도 응답, 가속도 응답 스펙트럼을 분석하여 시설물에 대한 내진성능을 평가하였다.