In this study, real-time monitoring of air quality using a real-time mobile monitoring system was conducted to identify the emission characteristics and current status of air pollutants and odorous substances that are mainly generated in domestic dyeing industrial areas and to trace the pollutant sources. The concentration of toluene in the industrial area was detected up to 926.4 ppb, which was 3 to 4 times higher than that of other industrial areas. The concentration of methylethylketone was 124.7 ppb and the concentration of dichloromethane was 129.5 ppb. Acrolein concentration was highest at E point at 521.6 ppb, methanol concentration was highest at D point at 208.8 ppb, and acetone concentration was highest at M and N points at 549.3 ppb. The most frequently detected concentration of pollutants in the air quality monitoring results in the industrial area was, in descending order, toluene > methanol > acrolein > dichloromethane > acetone, which was similar to the chemical emissions used in the industrial area by the Pollutant Release and Transfer Register data. The concentration of odorous substances measured in real time was compared with the concentration of minimum detection, and the concentration of hydrogen sulfide was about 10 times higher than the concentration of minimum detection at A point, which was judged to be the main odorous cause of A point. In the future, if the real-time mobile measurement system is constructed to automatically connect wind direction/wind speed, PRTR (Pollutant Release and Transfer Register) data and SEMS (Stack Emission Management System) data, etc., it was judged that more accurate monitoring could be performed.

특정 구획으로 유입된 오염물질이 해당 구획 내부에 순간적으로 균일하게 분포한다는 구획모델에 대한 기본가정의 한계로 인해, 전통적인 단일구획모델로는 불포화대에서 오염물질의 이동현상을 적절하게 예측할 수 없다. 한편 물리적으로 동일한 불포화대를 여러 개의 구획으로 구분한 다중구획모델링 기법은 실제 불포화대에서의 오염물질 이동 지연효과를 적절하게 설명할 수 있으나, 지금까지 일반적인 해석해가 보고된 바 없으며 고려하는 구획의 개수가 증가할수록 모델링에 많은 시간이 소요되는 등의 한계가 있다. 이러한 문제점을 해결하기 위하여, 이류가 지배적인 조건 하에서 불포화대의 오염물질 이동현상에 대한 다중구획모델을 수립하고 이를 해석적인 방법으로 계산할 수 있는 일반해를 유도한 후, 다중구획모델을 단일구획모델로 근사할 수 있는 수학적 제약조건을 도출하였다. 단순화된 근사방법론의 유효성은 가상적인 조건 하에서 간단한 수치해석적 방법을 통해 검증하였다. 물리적으로 동일한 특성을 갖는 불포화대를 단일 구획으로 가정할 경우, 불포화대로부터 포화대로 유입되는 오염물질의 전이율은 상수가 아닌 시간 종속적인 명목전이율로 표현할 수 있음을 증명하였다. 또한 명목전이율은 불포화대 구획간 전이율에 민감하며 오염층으로부터의 전이율에 대한 민감도는 미미한 것으로 나타났다. 이 연구에서 개발된 단순화된 근사방법론은 많은 시간이 요구되는 다중구획 모델링을 통하지 않고 불포화대 오염물질 이동현상을 신속하고 합리적으로 예측하기 위한 목적으로 활용될 수 있을 것으로 기대된다.

The complex nature of low flow mixing in natural channels has been investigated using both laboratory experiments and the numerical solution of a proposed mathematical model that is based on a set of mass balance equations describing the mixing and mass exchange mechanisms. Laboratory experiments, which involved collection of channel geometry, hydraulic, and dye dispersion test data, were conducted in a model of four pool and riffle sequences in a 49-m long tilting flume. The experimental results show that flow over the model pool-riffle sequences is highly non-uniform. Concentration-time curves are significantly skewed with long tails. Comparison between measured and predicted concentration-time curves shows good agreement in the general shape, peak concentration and time to peak. The proposed model shows significant improvement over the conventional one-dimensional dispersion model in predicting natural mixing processes in open channels under low flow conditions through pools and riffles.

본 연구에서는 자료수집과 적용에 상당한 시간과 노력이 요구되는 기존의 수치모형들 대신에 최소한의 유역정보를 이용해 오염물질의 이동시간과 확산을 예측할 수 있는 방법을 제시하고자 하였다. 즉, 하천에서 오염물질의 이동속도, 시간에 따른 오염물질의 첨두농도, 오염물질이 하천의 한 점을 통과하는데 소요되는 시간장경 등의 요소들을 이용한 단위오염도의 개념을 도입하였으며, 이들 요소들의 추정을 위해서는 미국 내의 수많은 하천을 대상으로 개발된 회귀방정식을 이용하

To investigate air quality away from the coastal urban source region, we used a hybrid Eulerian-Lagrangian method which can describe the formation, transport, transformation and deposition processes in complex terrain. with inclusion of shipping sources that were considered to be important emission in the coastal urban region. The result of the Eulerian advection - diffusion prediction was quite similar to that of the Lagrangian particle diffusion prediction. It showed that pollutants emitted from piers can affect the part of inland, especially Dongrae and the coastal area. Those emitted from Sasang and Janglim industrial complexes can affect Hwamyeong and the coastal, respectively. During the daytime the concentration was low due to large deposition flux and terrain effect.

To predict diffusion and movement of air pollutants in coastal urban region a numerical simulation shoud be consider atmospheric flow field with land-sea breeze, mountain-valley wind and urban effects. In this study we used Lagrangian particle dispersion method in the atmospheric flow field of Pusan coastal region to depict diffusion and movement of the pollutants emited from particular sources and employed two grid system, one for large scale calculating region with the coarse mesh grid (CMG) and the other for the small region with the fine mesh grid (FMG). It was found that the dispersion pattern of the pollutants followed local circulation system in coastal urban area and while air pollutants exhausted from Sasang moved into Baekyang and Jang moutain, air pollutants from Janglim moved into Hwameong-dong region.