도심부 도로에서 불투수면적 증가로 인해 발생한 홍수 및 물순환 장애 문제를 해결하기 위해, 투수블록포장이 도입되고 있으며, 물순환 시스템 강화의 필요성에 따라, 투수블록포장은 효과적인 대안으로 주목받고 있다. 투수성 포장의 성능 향상 을 위해서는 교통 하중 지지력을 만족하고, 투수 성능을 동시에 확보해야 하므로 표층뿐만 아니라 하부 투수기층의 설계 기준과 입도 특성에 대한 고려가 필요하다. 그러나, 국내의 경우 설계법이 잘 정립되어 있지 않고, 국외에서는 AASHTO 93 설계법을 구조설계법으로 적용하고 있으며, 투수성 포장재료의 상대강도계수에 대한 연구가 부족하여 다양한 재료에 대 한 설계 적용이 어려운 한계가 존재한다. 이에 본 연구는 투수블록포장 하부 투수기층 골재의 물리적 특성과 입도 기준에 관한 고찰을 통해, 내구성 향상을 위한 설계 요인과 투수 성능 간의 관계 분석 결과를 정리함으로써, 두 방향을 모두 고려하여 효율적인 골재 입도 구성을 도모할 수 있는 적합한 방향성을 정립하는 것을 목표로 한다. 다양한 투수성 포장 설계 조건과 성능에 관한 연구를 다루는 문헌을 수집해 투수 블록포장의 하부구조 단면 설계에 적용할 수 있는 기준 및 연구 방법론을 정리함으로써 실무 연구자들의 국내 연구 활성에 기여하고자 한다

PURPOSES : In this study, we evaluated the quality levels of abrasion resistance and freeze-thaw resistance to the surface layer (colored layer) by using an overseas abrasion resistance test method to confirm the quality suitability of the concrete block surface for a domestic production permeable block. METHODS : In this study, a new evaluation item for increased durability apart from the quality standard of the permeable block was considered, namely, evaluation of the durability of the surface layer and the freeze-thaw resistance of the permeable block itself by EN 1338, ASTM C 779, 994, and GR 4009 (KS F 4419). RESULTS : The abrasion resistance test for the permeable block revealed that there were relative differences according to the different test methods. However, it was observed that if the ASTM C 779 test results did not meet the wear resistance quality standards, it did not satisfy ASTM C 944 and EN 1338. The ASTM C 779 test result was analyzed to have the highest objectivity and discernment, and this test method was proposed as a permeable block wear test method. In addition, the freeze-thaw resistance test method by the GR 4007 standard can be measured by strength, so it is possible to evaluate the resistance of the permeable block through this test method. CONCLUSIONS : The abrasion resistance test and freeze-thaw resistance test can contribute to the improvement of the permeable block when added to the current quality evaluation tests.

PURPOSES : This study was conducted to analyze the problems of the permeable block by objectively evaluating the quality of the permeable block and providing basic data to improve the quality and construction defect of the permeable block pavement in accordance with the continuously increasing demand of the permeable block. METHODS : In this study, we evaluated the current quality standard suitability of nine products to evaluate the current quality level of domestic production permeable blocks. The evaluation items were evaluated for surface layer thickness, block dimension, strength, and permeability coefficient, and the Korea Standard suitability for these evaluation items was analyzed. In addition, a three-dimensional finite element analysis was conducted to determine the effect of vehicle load on the deformation of block pavement structure. RESULTS : The results demonstrated that the surface layer (colored layer) thicknesses of domestically produced permeable block products were different according to the quality standards, and the dimensions were evaluated to be excellent for domestic permeable blocks currently being produced and delivered. In addition, the strength and permeability coefficient evaluation result demonstrated that all products meet the strength and permeability coefficient quality standards, but the correlation between these strengths and permeability coefficients is not high. The quality standard of strength and permeability coefficients is evaluated as being sufficiently achieved by domestic production technology. CONCLUSIONS: The intensity and permeability coefficients measured in this study were in line with the quality standards; however, the variable coefficient was found to have a significant difference in the quality control level from a maximum of 26% to a minimum 1.7%.

PURPOSES : In this study, a numerical clogging model that can be used to realistically visualize the movement of particles in cylindrical permeability test equipment was proposed based on the system coupling of computational fluid dynamics with the discrete element method and experimental permeability test results. This model can also be used to simulate the interaction of dust particles with bedding particles. METHODS: A 4-way system coupling method with multiphase volumes of the fluid model and porous media model was proposed. The proposed model needs to consider the influence of flow on the dust particles, interaction between the dust particles, and interaction between the dust particles and bedding layer particles. The permeability coefficient of the bedding layer in cylindrical permeability test equipment was not calculated by using the permeability test result, but was estimated by using the particle packing model and Ergun model. RESULTS : The numerical simulation demonstrated a good agreement with the experimental test results in terms of permeability and drain time. Additionally, the initial movement of particles due to the sudden drain hole opening was successfully captured by the numerical model. CONCLUSIONS : A 4-way coupling model was sufficient to simulate the water flow and particle movement in cylindrical permeability test equipment. However, additional tests and simulation are required to utilize the model for more realistic block pavement systems.

PURPOSES : In this study, a series of fundamental falling head permeability tests were conducted on a binary particle mix bedding to determine the minimum water level, bedding layer thickness, and amount of dust that can result in the stable permeability with high repeatability. The determined condition is used to develop a CFD-DEM coupled clogging model that can explain the movement of dust particles in flowing water of a block pavement system. METHODS: A binary particle mixture is utilized to experimentally simulate an ideal bedding layer of a block pavement system. To obtain a bedding layer with maximum packing degree, the well-known particle packing degree model, i.e., the modified Toufar model, was utilized. The permeability of the bedding layer for various water levels, bedding layer thicknesses, and amounts of dust was calculated. The permeability for a small water level drop was also plotted to evaluate the effect of dust on the bedding layer clogging. RESULTS: It was observed that a water level of 100 mm, bedding depth of 70 mm, and dust amount of 0.3 g result in a stable permeability condition with high repeatability. The relationship between the minimum dust amount and surface clogging of the bedding layer was suggested based on the evaluation of the volumetric calculation of the particle and void and the permeability change in the test. CONCLUSIONS: The test procedure to determine the minimum water level, bedding thickness, and dust amount was successfully proposed. The mechanism of clogging on the surface of the bedding layer was examined by relating the volumetric characteristics of dust to the clogging surface.

주된 도시들의 불투수성 포장화에 따른 현상으로 토양의 사막화를 일으키고 있으며, 나아가, 도시 온난화 현상을 발생시켜 도시지역의 평균 온도를 올리는 원인이 되고 있다. 이로 인해 우수가 투수성 토양에 흡수되거나 잔류되어야 하는 양이 줄어듦에 따라 자주 도심지내에서 범람이 되는 현상을 보여주고 있다. 결국은 우수시스템이 제대로 작동하지 않고 침식이 발생하고 있다. 투수성 포장시스템과 관련해서는 블록 포장이 여러 군데서 수년 동안 사용되어 왔다. 또한 투수성 블록 포장은 전통적으로 사용된 아스팔트 포장 및 콘크리트 포장에 비해 다양한 형태로 사용될 수 있는 장점과 더불어 타 포장보다 미적으로 낳은 면을 보여 주고 있다. 따라서 도로의 현장 조건을 모사하기 위해 본 연구에서는 실험용 슬러지 및 휠 트래킹 장비를 이용한 블록 포장의 기능적인 투수성 평가를 실시하였다.

This study aims to measure and to analyze the characteristics of thermal environment of the various permeable pavement materials such as a break stone pavement (Green block cubic), soil protection pavement (Soil tector), soil cement pavement and ceramic brick pavement under the summer outdoor environment. The thermal environment characteristics measured in the study includes the changes of surface temperature during the day, and long and short wave radiation of each pavement surface. The experimental condition is based on the data on the hottest temperature (August 9, 2006, 37.1℃) of the year. The albedo was the highest on the break stone pavement(0.8) from 12:00 to 14:00. The albedo of the ceramic brick pavement, a soil tector pavement and soil cement pavement were 0.35, 0.29 and 0.27 from 12:00 to 14:00, respectively. The peak surface temperature and long wave radiation was the highest on the soil protection pavements(56.6℃/627 W/m2). The peak surface temperatures and long wave radiation on the ceramic brick pavement, a stone brick pavement and soil cement pavement were 51.7℃/627 W/m2, 48.8℃/607 W/m2 and 45.9℃/582 W/m2, respectively. The heat environment was better on the break stone pavement than on the other pavements. This is mainly due to the high albedo of the break stone pavement(0.8) while the albedo value of a ceramic brick pavement, a soil tactor pavement and soil cement pavement were 0.35. 0.29 and 0.27. Large heat capacity(2,629 kJ/㎥․K) of the stone brick pavements also contributes to this difference. The heat environment was better on the soil cement pavement than the soil tector pavement. This is mainly due to the evaporation of the soil cement pavement while the active evaporation of the soil tactor pavement was not continued after two days from the rainfall event. To improve the thermal environments in the urban area, it is recommended to raise the albedo of the pavements by brightening the surface color of the pavement materials. Further studies on the pavement materials and the construction methods which can enhance the continuous evapotranspiration from the pavements surface are needed.