본 연구에서는 게임 동영상의 고화질 변환이 가능한 초해상화 알고리즘을 제시한다. 본 알고리즘은 오픈 소 스 형태의 GPU에서 제공하는 MMU에서 구현될 수 있도록 희소 행렬 연산을 이용해서 설게된다. 이를 위해 서 일반적인 영상 해상도 향상 방법인 이중 일차 및 이중 삼차 보간 법과 심층 학습에 기반한 초해상화 모 델에서 사용하는 컨볼루션 연산을 희소 행렬 연산으로 변환하는 방법을 제시한다. 이는 각 픽셀에 적용되는 필터를 행렬 곱 형태로 표현하고, 이 행렬을 희소 행렬로 표현함으로써 수행되는데, 이러한 과정을 통해서 연산의 효율성을 추구함으로써 안정적인 초해상화 알고리즘을 제공한다. 이러한 희소행렬 연산 형태로 표현 되는 초해상화 알고리즘은 기존의 라이브러리를 이용해서 구현된 초해상화 알고리즘과 유사한 PSNR과 FPS 를 보인다.

The multi-layered heat source model is a model that can cover most of existing studies and can be defined with a simple formula. Based on the methodology performed in previous studies, the welding heat source was found through experiments and FEM under the welding power conditions of three cases and the parameters of the welding heat source were analyzed according to the welding power. In this study, parameters of fiber laser welding heat source according to welding power were searched through optimization algorithm and finite element analysis, and the correlation was analyzed. It was confirmed that the concentration of the welding heat source in the 1st layer was high regardless of the welding power, and it was confirmed that the concentration of the welding heat source in the 5th layer (last layer) increased as the welding power increased. This reflects the shape of the weld bead that appears during actual fiber laser welding, and it was confirmed that this study represents the actual phenomenon.

본 연구는 얼음결정체의 형성을 막고자 step-cooling 알고리즘을 적용하여 갈치를 과냉각 저장하였다. 저장의 신선도 유지효과를 확인하기 위해 냉장 및 냉동 저장된 갈치와의 신선도 비교평가를 실시하였다. 과냉각 저장은 냉장 저장과 비교하였을 때, 일반세균수와 단백질 부패로 인해 그 함량이 증가되는 VBN, TMA 값에서 비교적 작은 값을 보여 품질 유지에 효과를 나타내었다. 또한, 냉동 저장과 비교하였을 때, pH, VBN 및 TMA에서는 저장이 종료된 12일을 기준으로 차이를 크게 나타내지 않았다. 일반 세균수에서는 9일차까지 비슷한 값을 유지하였으며, 12일 차에서는 과냉각 시료가 높은 값을 보였다. 이를 통해, 과 냉각 저장이 미생물 생장을 최소화하고 단백질 부패를 지연시키는데 효과가 있다고 사료된다. 장기저장에서는 크게 영향을 미치지는 않았으나, 단기저장 관점에서는 냉장 저장보다 과냉각 저장이 갈치의 품질을 유지하는데 많은 장점을 가질 것으로 판단된다.

전역 최적화 문제의 해를 유전 알고리즘을 사용하여 얻어 완전파형역산을 수행하고 층상 반무한체의 물성치를 추정하는 기법을 제안한다. 조화 수직 하중이 작용하는 층상 반무한체의 동적 응답을 측정하고, 이를 추정 물성치를 사용하여 계산된 응답과 비교한다. 응답의 추정치는 mid-point integrated finite element와 perfectly matched discrete layer를 사용하여 구성된 thin-layer model로부터 얻는다. 전역 최적화 문제의 목적 함수는 응답의 관측치와 추정치의 차이에 대한 L2-norm으로 계산된다. 유전 알고리즘을 사용하여 전역 최적화 문제의 해를 구하여 완전파형역산을 수행한다. 제안된 기법을 기본 진동 모드 뿐만이 아니라 고차 진동 모드도 우세한 다양한 층상 반무한 매질에 적용하여, 측정치가 잡음을 포함하지 않는 경우와 포함하는 경우 모두에 대해서 제안된 완전파형역산 기법은 층상 반무한체의 재료 특성을 추정하는데 적합함을 확인할 수 있다.

PURPOSES : This study verifies the stability and uniqueness of the traffic assignment algorithm. METHODS : The traffic assignment step of the four-phase traffic demand model is an important step in determining the traffic volume of the link in the process of distributing the O/D traffic volume on each link. In this step, primarily, a link-based algorithm based on user equilibrium has been used. The typical link-based algorithm, FWA, is known to provide uniqueness and stability, in theory, regarding traffic assignment results. However, recent studies have raised the controversy that, in reality, the FWA is less stable and unique depending on the termination criterion applied to the FWA in the traffic assignment step. Stability tests and proportionality tests were conducted for the application of algorithms to widely used commercial software (for example, EMME, CUBE, and TransCAD). RESULTS : According to this study, the uniqueness and stability of the FWA were not followed in the process of actual traffic assignment, unlike the theory. CONCLUSIONS : The traffic assignment model has essentially the same result when the optimum level is reached, irrespective of the program and traffic allocation techniques used. Therefore, efforts will be required to recognize limitations in practice and to produce stable results at an appropriate level when predicting traffic demand, traffic volume, benefits, and feasibility studies using a traffic allocation model.

PURPOSES : This study aims to investigate the factors that affect the practical condition of the convergence and convergence behaviors of the asymmetric transportation equilibrium problem (ATEP). METHODS : To achieve this objective, a real network experiment is critical because the crux of the problem associated with the ATEP is the difficulty of verifying the unique condition in real networks owing to asymmetric modeling. The study employed a numerical approach to deal with this problem because analytical derivation based on small networks has a limitation in extending its findings to practical applications. The study addressed the problems using large real networks and different types of interactions, including links and modes. An investigation of the factors that have the potential to affect the convergence of the problem was conducted with the solution algorithm, which is the double projection method. RESULTS : The study presented a partial answer to the question of whether the ATEP's convergence condition is too strong. In link interactions, demand intensities and symmetric features within the cost function along with the network configuration were determined to relax the convergence condition. In mode interactions, the degree of overlap of the route composition and the controlled asymmetric interactions in the cost function were determined to affect the convergence condition. CONCLUSIONS : The results suggested that the modeling of link interactions for a more complicated transportation system design enabled the modeling of complex asymmetric interactions as long as the demand intensity of the network was not strong. In the case of mode interactions, whereas it was not possible to control the route composition, it was considered possible to a degree where the use of a distinct route was observed for each class (for example, designated truck lanes).

최근의 기후변화는 연안에서 더욱 가속화되고 있어 연안에서의 해양 환경변화 감시의 중요성이 커지고 있다. 클로로필-a 농도는 해양 환경 변화의 중요한 지표 중 하나로 수십년 동안 여러 해색 위성을 통해 전구 해양 표층의 클로 로필-a 농도가 산출되었으며 다양한 연구 분야에 활용되었다. 하지만 연안 해역의 탁한 해수는 외해의 맑은 해수와는 구별되는 구성 성분과 광학적 특성으로 인해 나타나는 심각한 오차 때문에 일반적으로 사용되는 전지구 대양을 위하여 만들어진 클로로필-a 농도 알고리즘은 연안 해역에 대입할 수 없다. 또한 연안 해역은 해역에 따라 성분과 특성이 크게 달라져 통일된 하나의 알고리즘을 제시하기 어렵다. 이러한 문제점을 극복하기 위하여 연안의 탁도가 높은 해역에서는 구성 성분과 광학적 변동 특성을 고려한 다양한 알고리즘들이 개발되어 사용되어 왔다. 클로로필-a 농도 산출 알고리즘은 크게 경험적 알고리즘, 반해석적 알고리즘, 기계학습을 활용한 알고리즘 등으로 나눌 수 있다. 해수의 반사 스펙트 럼에 기반한 청색-녹색 밴드 비율이 기본적인 형태로 주로 사용된다. 반면 탁한 해수를 위해 개발된 알고리즘은 연안 해역에 존재하는 용존 유기물과 부유물의 영향을 상쇄시키기 위한 방식으로 녹색-적색 밴드 비율, 적색-근적외 밴드 비 율, 고유한 광학적 특성 등을 사용한다. 탁한 해수에서의 신뢰성 있는 위성 클로로필-a 농도 산출은 미래의 연안 해역을 관리하고 연안 생태 변화를 감시하는데 필수적이다. 따라서 본 연구는 탁도가 높은 Case 2 해수에서 활용되어온 알고리즘들을 요약하고, 한반도 주변해역의 모니터링과 연구에 대한 문제점을 제시한다. 또한 다분광 및 초분광 센서의 개발로 더욱 정확하고 다양한 해색 환경을 이해할 수 있는 미래의 해색 위성에 대한 발전 전망도 제시한다.

A smart tuned mass damper (TMD) is widely studied for seismic response reduction of various structures. Control algorithm is the most important factor for control performance of a smart TMD. This study used a Deep Deterministic Policy Gradient (DDPG) among reinforcement learning techniques to develop a control algorithm for a smart TMD. A magnetorheological (MR) damper was used to make the smart TMD. A single mass model with the smart TMD was employed to make a reinforcement learning environment. Time history analysis simulations of the example structure subject to artificial seismic load were performed in the reinforcement learning process. Critic of policy network and actor of value network for DDPG agent were constructed. The action of DDPG agent was selected as the command voltage sent to the MR damper. Reward for the DDPG action was calculated by using displacement and velocity responses of the main mass. Groundhook control algorithm was used as a comparative control algorithm. After 10,000 episode training of the DDPG agent model with proper hyper-parameters, the semi-active control algorithm for control of seismic responses of the example structure with the smart TMD was developed. The simulation results presented that the developed DDPG model can provide effective control algorithms for smart TMD for reduction of seismic responses.

Most of the open-source decision tree algorithms are based on three splitting criteria (Entropy, Gini Index, and Gain Ratio). Therefore, the advantages and disadvantages of these three popular algorithms need to be studied more thoroughly. Comparisons of the three algorithms were mainly performed with respect to the predictive performance. In this work, we conducted a comparative experiment on the splitting criteria of three decision trees, focusing on their interpretability. Depth, homogeneity, coverage, lift, and stability were used as indicators for measuring interpretability. To measure the stability of decision trees, we present a measure of the stability of the root node and the stability of the dominating rules based on a measure of the similarity of trees. Based on 10 data collected from UCI and Kaggle, we compare the interpretability of DT (Decision Tree) algorithms based on three splitting criteria. The results show that the GR (Gain Ratio) branch-based DT algorithm performs well in terms of lift and homogeneity, while the GINI (Gini Index) and ENT (Entropy) branch-based DT algorithms performs well in terms of coverage. With respect to stability, considering both the similarity of the dominating rule or the similarity of the root node, the DT algorithm according to the ENT splitting criterion shows the best results.

This study pursues to solve a batch of nonlinear parameter estimation (NPE) problems where a model interpreting the independent and the dependent variables is given and fixed but corresponding data sets vary. Specifically, we assume that the model does not have an explicit form and the discrepancy between a value from a data set and a corresponding value from the model is unknown. Due to the complexity of the problem, one may prefer to use heuristic algorithms rather than gradient-based algorithms, but the performance of the heuristic algorithms depends on their initial settings. In this study, we suggest two schemes to improve the performance of heuristic algorithms to solve the target problem. Most of all, we apply a Bayesian optimization to find the best parameters of the heuristic algorithm for solving the first NPE problem of the batch and apply the parameters of the heuristic algorithm for solving other NPE problems. Besides, we save a list of simulation outputs obtained from the Bayesian optimization and then use the list to construct the initial population set of the heuristic algorithm. The suggested schemes were tested in two simulation studies and were applied to a real example of measuring the critical dimensions of a 2-dimensional high-aspect-ratio structure of a wafer in semiconductor manufacturing.

When considering military operations that require rapid response time, forward supply operation of various type of ammunition is essential. Also, t is necessary to supply ammunition in a timely manner before an ammunition shortage situation occurs. In this study, we propose a mathematical model for allocation of ammunition to ammunition storehouse at the Ammunition Supply Post (ASP). The model has several objectives. First, it ensures that the frequent used ammunition is stored in a distributed manner at a high workability ammunition storehouses. Second, infrequent used ammunition is required to be stored intensively at a single storehouse as much as possible. Third, capacity of the storehouse and compatible storage restriction required to be obeyed. Lastly, criticality of ammunition should be considered to ensure safety distance. We propose an algorithm to find the pareto-based optimal solution using the mathematical model in a reasonable computation time. The computational results show that the suggested model and algorithm can solve the real operational scale of the allocation problem.

This study studied a system that can redesign the production site layout and respond with dynamic simulation through fabric production process innovation for smart factory promotion and digital-oriented decision making of the production process. We propose to reflect the required throughput and throughput per unit facility of fabric production process as probability distribution, and to construct data-driven metabolism such as data collection, data conversion processing, data rake generation, production site monitoring and simulation utilization. In this study, we demonstrate digital-centric field decision smartization through architectural design for the smartization of fabric production plants and dynamic simulations that reflect it.

A60 급 갑판 관통 관은 선박과 해양플랜트에서 화재사고가 발생할 경우 화염의 확산을 방지하고 인명을 보호하기 위해 수평구조에 설치되는 방화장치이다. 본 연구에서는 다양한 대리모델과 다중 섬유전자 알고리즘을 이용하여 A60 급 갑판 관통 관의 방화설계에 대한 이산변수 근사최적화를 수행하였다. A60 급 갑판 관통 관의 방화설계는 과도 열전달해석을 통해 평가하였다. 근사최적화에서 관통 관의 길이, 지름, 재질, 그리고 단열재의 밀도는 이산설계변수로 적용하였고, 제한조건은 온도, 생산성 및 가격을 고려하였다. 대리모델 기반의 근사최적설계 문제는 제한조건을 만족하면서 A60 급 갑판 관통 관의 중량을 최소화할 수 있는 이산설계변수를 결정하도록 정식화 하였다. 반응표면모델, 크리깅, 그리고 방사기저함수 신경망과 같은 다양한 대리모델이 근사최적화에 사용되었다. 근사최적화의 정확도를 검토하기 위해 최적해의 결과는 실제 계산 결과와 비교하였다. 근사최적화에 사용된 대리모델 중 방사기저함수 신경망 모델이 A60 급 갑판 관통 관의 방화설계에 대해 가장 정확한 최적설계 결과를 나타내었다.

어선과 같은 소형선박의 충돌사고는 큰 인명피해를 초래한다. 본 연구 이전에 선행된 연구에서는 충돌위험을 판단하고 경보를 발생시키는 소형선박 충돌예방 알고리즘을 개발하였다. 하지만 충돌경보와 같이 안전을 위해 제공되는 서비스는 위험을 예방할 뿐 아니라 이용자의 만족도 또한 어느 정도 수반되어야 효과적으로 기능할 수 있다. 본 연구에서는 소형선박 충돌예방 알고리즘의 실용성 향상을 위해 알고리즘을 개선하고, 알고리즘을 실제로 적용하여 개선결과 및 효과를 확인하고자 하였다. 충돌경보 서비스를 사용한 소형선박 운항자들을 대상으로 설문조사를 수행한 결과, 충돌경보의 정확도 향상과 경보 횟수 및 음량에 대한 사용자들의 요구사항이 확인되었다. 이에 따라 본 연구에서는 사용자 만족도 향상을 위해 알고리즘을 개선하였으며 실제 해상환경에서 개선된 알고리즘을 적용한 실선실험 을 수행하였다. 그 결과 개선 전보다 경보 발생 빈도가 감소하였지만, 위험한 상황에서는 경보가 비교적 꾸준히 발생하였으며, 충돌경보의 정확성과 실용성이 향상된 것으로 분석되었다. 추후에는 개선된 알고리즘의 적정성에 대한 근거자료를 마련하여 알고리즘의 실용성과 신뢰성을 확보한다면 소형선박 충돌사고 예방에 효과적으로 기여할 수 있을 것이다.

In this study, a welding heat source model was presented and verified during fiber laser welding. The multi-layered heat source model is a model that can cover most of existing studies and can be defined with a simple formula. It consists of a total of 12 parameters, and an optimization algorithm was used to find them. As optimization algorithms, adaptive simulated annealing, multi island genetic algorithm, and Hooke-Jeeves technique were applied for comparative analysis. The parameters were found by comparing the temperature distribution when the STS304L was bead on plate welding and the temperature distribution derived through finite element analysis, and all three models were able to derive a model with similar trends. However, there was a deviation between parameters, which was attributed to the many variables. It is expected that a more clear welding heat source model can be derived in subsequent studies by giving a guide to the relational expression and range between variables and increasing the temperature measurement point, which is the target value.

Welding is the most widely used technology for manufacturing in the automobile, and shipbuilding industries. Fiber laser welding is rapidly introduced into the field to minimize welding distortion and fast welding speed. Although it is advantageous to use finite element analysis to predict welding distortion and find optimized welding conditions, there are various heat source model for fiber laser welding. In this study, a welding heat source was proposed using a multi-layered heat source model that encompasses most of the existing various welding heat source models: conical shape, curved model, exponential model, conical-cylindrical model, and conical-conical model. A case study was performed through finite element analysis using the radius of each layer and the ratio of heat energy of the layer as variables, and the variables were found by comparing them with the actual experimental results. For case study, by applying Adaptive simulated annealing, one of the global optimization algorithms, we were able to find the heat source model more efficiently.

PURPOSES : The driver's ability to make a commitment has resulted in excessive force and a lack of commitment. To solve this problem, we are developing an algorithm that analyzes resolution in real-time by introducing IoT and informs drivers of the completion of compaction. METHODS : Real-time compaction was analyzed by installing accelerometers on the rollers. To evaluate the algorithms, we conducted an apparent density test. RESULTS : The algorithm data and apparent density test data showed similar trends. This means that the proposed algorithms are sufficiently reliable. However, a lack of data samples and the fact that only data prior to completion of the commitment were analyzed may indicate a lack of reliability. CONCLUSIONS : In subsequent studies, the number of samples will be increased and the data after completion of the commitment analyzed to increase reliability. Introducing a tachometer will prevent the TVL from falling sharply when the direction of the rollers' progress changes. In addition, it is also planned to upgrade the algorithms by researching cases in which the algorithms did not produce satisfactory results owing to problems such as temperature and speed.