In this study, the authors introduce a newly developed flatfish grading system. Owing to the features of flatfish with and wide body, the general types of grading system are not easy to apply for it. Furthermore, the flatfish to be graded is alive such that the existing measurement and grading systems cannot be used for it as well. This study gives a solution for measuring and grading the flatfish with high speed and good accuracy. For this object, the authors developed flatfish measurement and grading system. This system consist of the feeding, conveying, measurement part and sorting part. Especially, the measurement part is made by vision based measuring technique which satisfies the given specification. The result from the experiment shows that the developed system is applicable for measuring and grading the flatfish sizes in variety.

The development of this technology produced the design of welding mesh automation system and obtained the following results. 1. The performance criteria of this research and development were higher than this, resulting in more than 300 N/㎟ of disconnection and more than 250N/㎟ of double wire. Double wire also obtained values of as low as 521 N/㎟ and as high as 623 N/㎟ 2. We compared the bending strength of the single mesh and the dual mesh by the bending test, and the result is 1692N of the average of single-mesh and 487N of double wire welded mesh. 3. As a result of the test, 64 minutes of abs of 5mm wire were 112 minutes of each. The welding speed was constant and stable.

A retractable bollard system has been used for the traffic control and protection of important facilities such as electric power plants, airports and government buildings etc. The power source of the driving unit of the conventional protective bollard system is on hydraulic or pneumatic system which has several disadvantages compared to an electric driven unit. In this research, an electric driven unit for an automatic retractable bollard is designed and developed to replace the conventional hydraulic and pneumatic driven type. For the reliability test of the developed electric driven unit, a field test has been successfully done. A case study was conducted to develop a defensive retractive bollard which the target performance is 9sec. and 7sec. on its raising and descending operation speed respectively with 750mm in stroke. The required time limit was fully satisfied as the time measured from the experiment were 7.5sec and 5.5sec for each operation. The developed unit also passed 364,000 cycles of operation without any serious malfunctions at the load test proving its reliability. The design theory and process of an electric driven unit of the automatic retractable bollard presented in this article is believed to be very useful contribution and design tool in advancing the physical security industry.

The first aim of the study is to improve the productivity by uniformizing the thickness of coating and reducing quality-inspection time. The second aim is to cut down on the raw materials for coating by prevent the waste of spraying in the air during a painting process through a real-time coating-sizerecognition monitering to fit the target components. To achieve the two aims, a simplified version of automatic coating control system for recognition of coating for vessels and Spray. With the sytem, following effects are expected: First, quality improvement will be achieved by uniformizing the film-thickness. Second, it will reduce the waste of coating paint by constructing the speed of the coating, the spray gun robot transfer time, and the number of DBs according to the size of the vessel. Third, as a 3D industry, it will be able to solve the difficulty of supply of labors and save up the labor costs. Therefore, in the future, further research will be needed to be applied to various products with DB design that designates the variable value, which is added for each type of pieces by comparing the difference between various types of workpieces and linear ones.

In this study, to reduce the weight of cross member assembly for small truck. In order to optimize the design of the cross member structure by changing the equation into the rivet coupling method, The size and the hole spacing of the large sheet plate, the rivet hole size of the large sheet plate, In the structural analysis, we looked at what was going to happen, and the tensile, shear The load test was carried out to investigate the damage caused by the maximum load acting on the rivet. Riveting work, but to improve productivity, we developed automated riveting device using robot To reduce the number of workers, reduce jig transfer and installation time, and reduce load factor. To produce the maximum output of the product.

Molding is the root industry of the manufacturing as a means to mass-produce developed prototypes. Molds are typically divided into injection molds and press mold industries. Injection molds produce the products by injection of molten plastic into a mold, and press molds are molded and bended plate. The ejection system, such as eject pins, is used to separate the manufactured products from the mold, which involves a number of hole operations. Location, diameter and depth of holes are often tabulated and managed collectively when designing 2D drawings. The design efficiency was realized by applying CATIA Automation to the 3D model and bringing in the data of the holes in the Excel data.

구조물의 『3차원 설계』는 성공적인 BIM(building information modeling) 정착을 위한 핵심 기술이다. 이를 위해 다양한 BIM 라이브러리들이 개발되고 있지만 선형기반으로 구조물이 가설되는 교통 인프라의 설계업무에 적용하기에는 한계가 있다. 상용화된 BIM 소프트웨어들이 지원하는 라이브러리를 계획된 선형을 기반으로 구조물이 가설되는 교통 인프라의 설계 업무에 적용하는 것은 사용성 측면에서 한계가 있다. 더욱이 조합을 고려하지 않고 개발된 라이브러리로 생성된 모델은 다양한 설계변경 상황에 대응하기가 쉽지 않다. 따라서 본 논문에서는 교통인프라 구조물인 철도 교량을 대상으로, 유관 시설 또는 부재에 대한 3차원 객체를 설계변경에 효율적으로 대처할 수 있도록 매개변수 기법을 적용한 ‘BIM기반 3D 모델 생성 자동화 모듈’을 구축하였다. 모듈의 주요기능은 기준선형을 바탕으로 기준경로를 도출하고 다른 객체와의 조합을 고려하여 목표객체를 연장 및 배열하는 것이다. 또한 모듈의 조합으로 구성된 철도교량의 통합모델에 대하여 설계변수를 입력할 수 있는 사용자 인터페이스를 구성하여 설계변경 대응능력에 대한 적용성을 검증하였다.

Inventory inspection is an important task to eliminate the inconsistency between real assets and inventory management systems, and it is performed periodically at the site. In the case of a large-sized property, it is mainly managed in an outdoor workshop or a warehouse. However, due to the large area of the outdoor area, it is relatively difficult to identify the quantity and location of the property and is also vulnerable to theft. To solve this problem, we proposed a method and system for performing a warehouse inventory inspection using an unmanned aerial vehicle (UAV) and Bluetooth low energy (BLE) beacons. The proposed method has the following advantages. First of all, if we carry out inventory inspection by utilizing UAV, we can minimize user’s effort compared to existing methods. The method of recognizing the asset by attaching the BLE beacon is more costly than using the existing RFID technology, but it is advantageous because the recognition distance is increased and the battery life of the tag is drastically increased. We also designed a BLE beacon reader for the system and implemented a prototype to show the feasibility of the proposed system. The prototype is based on Genuino 101, which is a kind of arduino, and adds HM-10 and Neo-6m modules to provide Bluetooth and GPS functions. The BLE beacon reader was tested in outdoor, and attached in drone. We also developed an inventory checking system based on the web to display results of inventory checking. The proposed approach enables the users to automate the operation of inventory checking on an outdoor warehouse.

This study aimed to analyze the profitability and economic feasibility of hairtail trolling line gear that was developed for the last 3 years (2015-2017). The new fishing gear technology development was accomplished to solve the current problem of fishermen shortage in hairtail targeting fisheries in Jeju region. Results indicated that the profitability of developed hairtail trolling line fishery was estimated to be 36.1 % which would be higher than that of other hairtail targeting fisheries in Jeju region. In addition, as an economic feasibility, the net present value and the internal rate of return of a 20-year cash inflow and outflow were evaluated to be 400.2 million won and 66.9 %, respectively. However, sensitivity analyses of main variables showed that the profitability and economic feasibility would be vulnerable to catch amount and market condition changes.