검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 44

        3.
        2020.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        가용화현상에 있어서 유기물(피가용화물)과 계면활성제와의 상호관계를 조사하고자 UV-Vis 법을 이용하여 가용화상수(Ks)값을 구하였다. 유기물의 para-위치에 알킬치환기가 도입된 4-alkylanilines 과 양이온계면활제인 소수기 길이가 서로 다른 DTAB, TTAB, CTAB를 이용하여 유기물과 계면활성제 간의 소수성 상호작용에 따른 가용화 상수값과 그에 따른 열역학함수들을 다양한 온도에서 구하여 서로 비교하였다. 그 결과 유기물에서 알킬치환기에 의한 소수성효과는 탄소사슬의 길이가 증가할수록 일정한 비율로 증가하였고, 또한 계면활성제에서 소수기의 길이효과도 일정한 비율로 증가하였다. 그런데 이러 한 소수성 효과는 유기물에서 알킬치환기에 의한 효과가 계면활성제에서 소수기의 효과 보다 더 크게 나타났다. 또한 계산된 열역학 함수값들의 결과들로부터 유기물의 소수성이 증가할수록 그리고 계면활성제의 소수성이 증가할수록 유기물은 미셀내부의 더 깊은 곳으로 가용화됨을 알 수 있었다. 등구조온도는 실험 조건 범위 내에서 큰 차이를 보이지 않았으며, 최대값과 최소값의 차이가 1K미만으로 차이가 거의 없는 것으로 나타났다.
        4,000원
        6.
        2018.05 구독 인증기관·개인회원 무료
        The anion exchange membrane fuel cells (AEMFCs) have been known to be promising eco-friendly power sources. To develop AEMFCs, the high ion conductivity, good dimensional, mechanical and alkaline stabilities are required for AEMs. However, the high conductivity generally requires high water uptake, which causes an enhanced swelling and decreased mechanical properties for the AEMs. To overcome this problem, we introduced an ionic conductor having long alkyl diammonium groups to alkyl-substituted poly(p-phenylene oxide) (PPO). Addition of this new additive increased the conductivity, mechanical and alkaline stabilities due to the molecular interaction between alkyl chains in PPO and same group of the additive. Synthesis and properties of the corresponding membranes will be discussed in detail.
        8.
        2017.04 구독 인증기관·개인회원 무료
        Ionic liquids (ILs) are organic salts with low melting point by asymmetric ionic strength between cation and anion. They have been known as promising DNA extraction, separation and preservation agent due to their hydrophilic, hydrophobic interaction with DNA. However, few studies have been performed about how DNA-ILs complexes form and their mechanism. Herein, we present three types of ionic liquids (EMIM-Cl, BMIM-Cl, and OMIM-Cl) change the DNA structure depend on alkyl chain length of ionic liquids. Structural changes of DNA by ionic liquids are observed by Atomic force microscopy, gel electrophoresis, zeta potential and solid-state nanopore technology. The results of AFM show the different structures of DNA, including aggregate, stretching, and bundling shapes in terms of EMIM-Cl, BMIM-Cl, and OMIM-Cl respectively. In DNA translocation experiment, DNA/EMIM-Cl show rare translocation signal due to aggregated structure by neutralized surface charge. DNA/BMIM-Cl and DNA/OMIM-Cl show slowing down the translocation speed due to changes of DNA net charge and structure. Especially, OMIM-Cl make slowing down the DNA translocation speed about 102~104 times compared to translocation speed of bare DNA by unzipping the bundling shape of complex. In conclusion, the morphology of DNA could be modified by the incorporation with different alkyl chain length of ILs, providing their further application in nanopore technique for slowing DNA sequencing or understanding protein-DNA interaction.
        9.
        2017.03 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 오염된 점토 내 Cs을 제거하기 위하여, 계면활성제의 소수성 알킬사슬의 길이에 따른 Cs의 탈착특성을 연구 하였다. 양이온성 계면활성제로 Alkyl trimethyl ammonium bromide를 사용하였고, 소수성 알킬사슬은 octyl-, dodecyl-, cetyl- 으로 변화시켰다. 소수성 알킬사슬이 길어질수록 montmorillonite 내 계면활성제의 흡착량이 증가하였고, 계면활성제의 층간 흡착으로 층간거리가 증가하는 것으로 나타났다. Cs의 탈착률도 알킬사슬의 길이가 증가함에 따라 향상되었고 cetyl 그룹을 갖는 양이온성 계면활성제는 최대 99±2.9%의 Cs 제거율을 나타냈다.
        4,000원
        10.
        2016.11 구독 인증기관·개인회원 무료
        The anion exchange membrane fuel cells (AEMFCs) have been noticed as the promising power sources. One of the most important components in AEMFC is the anion exchange membranes(AEMs). Recently various materials for AEMs have been investigated for fuel cell applications. Imidazolium-based long alkyl chain multiblock copolymers have drawn much interest due to their well-defined phase separation between hydrophilic and hydrophobic blocks. We report herein the investigation of the effect of block ratio on the phase separation as well as mechanical and electrical properties of the corresponding membranes.
        11.
        2016.10 구독 인증기관·개인회원 무료
        Ionic liquids (ILs) have been used in DNA extraction/separation, DNA preservation and PCR based on their characteristic affinity to DNA. However, few studies have been performed about how DNA-IL complex forms and its mechanism which would be essential to understand the role of ILs over the range of applications. Herein, we present that the differences in the structure of the DNA- IL complex are associated with the alkyl chain length of IL. The assumption was evidenced by Atomic force microscopy, DNA specific dye staining, gel-electrophoresis and real-time electrical measurement. We observed unique electrical signals with altered duration time and amplitude when DNA- ILs complexes pass through solid-state nanopore. We examined three types of ILs (EMIM-Cl, BMIM-Cl, and OMIM-Cl) for their characteristics to form DNA-ILs complexes. The results indicated that the length of hydrophobic alkyl group in respective ILs determines the form of DNA-IL complex. In conclusion, the morphology of DNA could be modified by the incorporation with different alkyl chain length of ILs, providing their further application in biosensor such as nanopore technique for DNA sequencing or understanding protein-DNA interaction.
        12.
        2016.10 구독 인증기관·개인회원 무료
        The aim of this study was to improve dispersion stability of calcium carbonate (CaCO3) nanoparticles in aqueous medium using alkyl polyglucoside (APG). One hundred milligrams of CaCO3 nanoparticles was mixed with 30 mL of deionized water. Thereafter, APG was dissolved into the CaCO3 nanoparticle mixtures at approximate 0, 0.1, 0.3, 0.5, 0.7, and 0.9%, and subsequently, pH was adjusted to 7.0 and 10.0. Afterward, all CaCO3 nanoparticle mixtures were dispersed by ultrasonic processing treatment for 10 min. Dispersion stability and physicochemical properties of the CaCO3 nanoparticle mixtures were observed by measuring the change of absorbance and mean diameter for 96 h as well as the initial zeta-potential. As results, initial zeta-potentials of the CaCO3 nanoparticles in deionized water at pH 7.0 and 10.0 showed approximately +20 and 0, respectively. The positive surface charge at pH 7.0 had unfavorable impact on the adsorption of APG onto CaCO3 nanoparticles in the aqueous suspensions because APG is nonionic surfactant. Among all samples at pH 10, CaCO3 nanoparticles in 0.5% APG aqueous solution showed the smallest initial mean diameter and the slowest increase in mean diameter and decrease in absorbance. In conclusion, the pH 10.0 and 0.5% APG concentration was the most desirable condition in order to improve dispersion stability of CaCO3 nanoparticles in an aqueous medium.
        14.
        2014.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        전형적인 3-전극 시스템의 순환전압전류법을 사용하여 알킬기를 가진 에탄올아민 용액 중에서 스테인리스에 대한 전류-전압 곡선을 측정하였다. 스테인리스는 작업 전극으로, Ag/AgCl 전극은 기준 전극으로, 그리고 백금선은 상대 전극으로 각각 사용하였다. N-에틸에탄올아민과 N,N-디메틸에탄올아민 용액에서의 스테인리스의 C-V특성은 순환전압전류법으로부터 산화전류에 기인한 비가역 공정으로 나타났다. 부식억제제의 확산계수의 효과는 각각 농도 증가에 따라 감소하였다. 금속의 SEM 이미지로부터 0.5 N의 전해질에서 부식억제제인 N,N-디에틸에탄올아민 (1.0 × 10-³ M)을 첨가한 경우, 구리와 니켈에서 부식억제 효과가 향상되었다.
        4,000원
        15.
        2010.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        We investigated the electrochemical properties for Langmuir-Blodgett(LB) films mixed with l-bromotetradecane(Cl4), l-bromohexadecane(Cl6), and l-bromooctadecane(Cl8). The alkyl bromides mixture was deposited by using the Langmuir-Blodgett method on the ITO glass. The electrochemical properties measured by using cyclic voltammetry with a three-electrode system(an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode) at various concentrations(0.5, 1.0, 1.5 and 2.0 N) of NaClO4 solution. A measuring range was reduced from initial potential to -1350 m V, continuously oxidized to 1650 mV. The scan rate was 100 mV/s. As a result, LB films of Cl4, Cl6, and Cl8 mixture monolayers appeared irreversible process caused by only the oxidation current from the cyclic voltammogram. The diffusivity(D) effect of LB films decreased with increasing of alkyl bromides amount.
        4,000원
        16.
        2009.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        We carried out this experiment to observe an electrochemical properties for LB films of alkyl compounds by the cyclic voltammetry. Alkyl bromides was deposited by using the Langmuir- Blodgett method on the ITO glass. We measured to an electrochemical measurement by using cyclic voltammetry with a three-electrode system(an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode) in 0.5, 1.0, 1.5 and 2.0 N NaClO4 solution. A measuring range was reduced from initial potential to -1350 mV, continuously oxidized to 1650 mV. The scan rate were 100 mV/s. As a result, an electrochemical properties of the LB films of alkyl bromides appeared irreversible process caused by only the oxidation current from the cyclic voltammogram. The diffusivity(D) effect of LB films decreased with increasing of alkyl compounds amount.
        4,000원
        17.
        2002.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Fatty polyamide that gives softness, lubrication and bulky property and alkyl imidazoline that gives durable softness and antistatic property were synthesized. then, an O/W-type durable softener (DSN) was prepared by the emulsion of the synthesized fatty polyamide and alkyl imidazoline. Emulsion stability of the DSN was good, and the mixed HLB value was 11.2. From the measurement of softness, lubrication, antistatic property, bending resistance, and color fastness, it was proved that the prepared DSN was a good durable softener for nylon.
        4,000원
        18.
        2002.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The alkaline hydrolysis of alkyl alkylphosphinate and alkyl phenylphosphinates have been studied at room temperature. The hydrolysis proceeded as an one-stage reaction(SN 2) and involved a nucleophilic attack of the hydroxyl ion on the phosphorus atom. And the length of the alkoxy group in the phosphinate esters affected on hydrolysis. Therefore, the alkaline hydrolysis may be used as a method to decompose the chemical agents.
        4,000원
        20.
        2001.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Alkyl polyglucosides were synthesized by solvent-free glycosidation using ultrasonic emulsification. We examined glycosidation conditions of fatty alcohol with glucose hydrate and anhydrous glucose in the presence of p-toluenesulfonic acid. Glucose was emulsified in a molar excess of fatty alcohol for 20 minutes with a ultra-sonicator at room temperature and converted in a stirred reactor to more than 95% polyglucoside within 2.5~3.5 hr under 20~30 mmHg at 110℃ with a three-fold molar ratio of fatty alcohol to glucose in the presence of 1mol% p-toluenesulfonic acid. It was possible to obtain a polyglucoside mixture of HLB 13 consisting of 65% monoglucoside and 35% oligoglucoside with less than 1% of fatty alcohol.
        4,000원
        1 2 3