Research has been conducted on a wide variety of 3D printer circular fin heads. In this study, we proposed a sequence and method for a more efficient mesh study in the CFD model to calculate the Nusselt number of the circular fin head of an FDM 3D printer using the Taguchi method, sensitivity, and ANOVA. As a result, the CFD model to calculate the Nusselt number of the circular fin head of an FDM 3D printer has high sensitivity and contribution in the order of Base target mesh size, Prism layer number, and Prism layer thickness. We propose to increase work efficiency by performing mesh optimization in the order of factors with high sensitivity to level changes.

The rack cylinder is an important part of the pile leg structure of the jack up platform. Because of its complex structure, the flow field around the rack cylinder is different from that around the ordinary cylinder, which brings difficulties to the research of the rack cylinder. In this paper, using CFD(Computational Fluid Dynamics) solved the flow field of chords with different rack height and rack width under different KC and Re, the characteristics of the flow field around the cylinder with rack are obtained. The results show that Re, KC, rack height and rack width all have different effects on the flow field. When Re and KC are constant, Cd will increase with the increase of rack height ratio, the change of Cd and Cl is not significant, while the change of Cd and Cl varies with Re when the chord structure is fixed.

PURPOSES : The evaluation of the low-temperature performance of an asphalt mixture is crucial for mitigating transverse thermal cracking and preventing traffic accidents on expressways. Engineers in pavement agencies must identify and verify the pavement sections that require urgent management. In early 2000, the research division of the Korea Expressway Corporation developed a three-dimensional (3D) pavement condition monitoring profiler vehicle (3DPM) and an advanced infographic (AIG) highway pavement management system computer program. Owing to these efforts, the management of the entire expressway network has become more precise, effective, and efficient. However, current 3DPM and AIG technologies focus only on the pavement surface and not on the entire pavement layer. Over the years, along with monitoring, further strengthening and verification of the feasibility of current 3DPM and AIG technologies by performing extensive mechanical tests and data analyses have been recommended. METHODS : First, the pavement section that required urgent care was selected using the 3DPM and AIG approaches. Second, asphalt mixture cores were acquired from the specified section, and a low-temperature fracture test, semi- circular bending (SCB) test, was performed. The mechanical parameters, energy-release rate, and fracture toughness were computed and compared. RESULTS : As expected, the asphalt mixture cores acquired from the specified pavement section ( poor condition – bad section) exhibited negative fracture performances compared to the control section (good section). CONCLUSIONS : The current 3DPM and AIG approaches in KEC can successfully evaluate and analyze selected pavement conditions. However, more extensive experimental studies and mathematical analyses are required to further strengthen and upgrade current pavement analysis approaches.

Controlling fashion waste throughout the entire product lifecycle is critical in a circular economy. This study explored the possibility of establishing a public recycling system for fashion waste. Since consumer interests and participation are essential, theoretical research, social-text analysis, and quantitative research were conducted to identify consumers’ perceptions of the public recycling of fashion waste and circular fashion. Data were collected via an online survey among women in their 20–30’s living in Korea, and 304 samples were used for data analysis. The results were as follows. First, consumers’ perceptions of recycling fashion waste were composed of recycling difficulty, the need for public recycling, and the need for EPR. Circular fashion perception comprised favor, environment protection, attractiveness, economics, quality and hygiene risks, and lack of diversity. Second, the reuse-recycle attitude and need for EPR affected the favor of all types of circular fashion products. Third, environmental concerns impacted attractiveness, and the favor significantly affected the purchase intention of all types of circular fashion products. In particular, quality and hygiene risk negatively affected the purchase intention of used-fashion products, while attractiveness positively impacted the purchase intention of upcycled-fashion products. The results implied that discussing the public recycling system of fashion waste and EPR policy is imperative. The results also showed the need to classify different types of circular fashion products, such as used, upcycled, and regenerated fashion items, to examine consumers’ perceptions. In addition, the recycling of the fashion waste scale developed in this study could be used for further research.

In order to determine fragility curves, the limit state of piers for each damage level is suggested in this paper based on the previous test results in Korea, including our test results. In previous studies, the quantitative measures for damage levels of piers have been represented by curvature ductility, lateral drift ratio, or displacement ductility. These measures are transformed to lateral drift ratios of piers for consistency, and the transformed values are compared and verified with our push-over test results for flexural RC piers with a circular cross-section. The test specimens are categorized concerning the number of lap-splices in the plastic hinge region and whether seismic design codes are satisfied or not. Based on the collected test results in Korea, including ours, the lateral drift ratio for each pier damage level is suggested.

교각의 내구성 증진 및 내진 보강을 위하여 원형철근 콘크리트 교각 외부에 강판을 보강한 경우, 교각 외부에서 발 생하는 화재에 대해 보강된 교각의 내화성능을 정량적으로 평가하였다. 범용유한요소해석프로그램 ABAQUS를 이용하였으며 ISO 834-1의 표준화재곡선을 적용하여 교각의 거동을 해석하였다. 해석 변수로는 강판보강두께와 원형교각 지름의 비, 교각에 수직으로 작용하는 축력비를 적용하였다. 교각의 상부와 하부는 힌지-롤러 경계조건을 고려하여 상부는 수직으로 변위가 발생하 도록 하였으며, 교각 외부 전체에 열하중을 가하였고 편심 없는 순수 축하중을 교각 중앙에 가력하였다. 온도에 따른 콘크리트, 철근 및 강재의 비열, 열전도율, 탄성계수 등을 고려하여 보강에 따른 교각의 내화 성능 향상도를 평가하였다. 강판으로 보강한 원형철근 콘크리트 교각은 콘크리트의 중심부일수록 강판 두께의 영향을 받지 않으며 강판 두께별 축력을 주 었을 때 내화시간은 축력비 0.7에서 최대 약 3분 향상되었다. 또한, 보강두께가 두꺼울수록 내하력이 향상하며 60분 이후에 모 두 내하력비가 1.0 이하로 감소하기 시작하는 것을 알 수 있었다. 강판보강공법은 내화성능을 향상시킬 수 있으며 강판 보강 두 께와 보강 지름의 비가 클수록 화재에 대해 축방향에 대한 변위와 내하력이 증가하는 것으로 나타났다. 본 연구결과를 토대로 원형철근 콘크리트 교각의 외부 강판 보강을 통하여 교각의 내화 성능을 향상시킬 수 있음을 정량적으로 판단할 수 있었다.

The objectives of this study were to develop the optimal structures of recirculating aquaculture tank for improving the removal efficiency of solid materials and maintaining water quality conditions. Flow analysis was performed using the CFD (computational fluid dynamics) method to understand the hydrodynamic characteristics of the circular tank according to the angle of inclination in the tank bottom (0°, 1.5° and 3°), circulating water inflow method (underwater, horizontal nozzle, vertical nozzle and combination nozzle) and the number of inlets. As the angle in tank bottom increased, the vortex inside the tank decreased, resulting in a constant flow. In the case of the vertical nozzle type, the eddy flow in the tank was greatly improved. The vertical nozzle type showed excellent flow such as constant flow velocity distribution and uniform streamline. The combination nozzle type also showed an internal spiral flow, but the vortex reduction effect was less than the vertical nozzle type. As the number of inlets in the tank increased, problems such as speed reduction were compensated, resulting in uniform fluid flow.

풍방향 공력감쇠는 항상 정감쇠 형태로 나타나기 때문에 구조물 진동을 더욱 안정화하는 경향이 있다. 준정상 가정에 의하여 공력감쇠를 예측할 수 있는 이론적 모델은 풍방향 공력감쇠의 발현특성을 모사하고, 발현에 영향을 미치는 영향인자를 설명하고 있다. 본 연구에서는 공탄성 실험을 통해 얻어진 계측응답으로부터 추정된 풍방향 감쇠를 이론적 풍방향감쇠와 비교하여 준정상 가정으 로부터 구해진 이론적 모델의 정합성을 평가하였다. 풍방향 감쇠는 최신 개발된 시스템 식별기술인 가상동적가진기에 의한 방법을 이 용하여 구한다. 본 연구결과로부터 풍방향 공력감쇠는 준정상가정에 의한 이론적 모델과의 차이를 보이며, 이것은 주로 높이별, 평균 풍속에 따른 난류강도의 크기에 의하여 영향을 받는 것으로 나타났다.

Wind tunnel tests were conducted to analyze the wind fluctuating pressures on a circular closed and open dome roof with a low span rise. Two dome models with various geometric parameters (height/span ratios and open ratios) were used for fixed span rise ratio dome and wind pressure spectrum were analyzed. The applicability was examined in comparison with the spectral model proposed in the previous studies. The analysis results show that the wind pressure spectrum of open dome roof tends to increase power in the high frequency range and the second peak is found in the area different from the closed dome roof. In addition, according to the comparison analysis with the previous proposed spectral model, it was found that it is not applicable to the closed and open dome roofs with low rise ratio due to the different peak frequencies.

In this paper, the mean and fluctuating pressure coefficients derived from the results of wind tunnel tests on closed and open dome roofs were analyzed. The distribution characteristics of the fluctuating pressure according to the opening ratio and the height change were discussed. The analysis results showed that when the roof is open, the overall wind pressure decreases due to the open space, but more fluctuation occurred than the closed dome roof.

천연골재의 부족으로 골재 수급이 날이 갈수록 심각해지면서 재활용 가능한 재료에 대한 사회적 관심이 높아지고 있다. 하지만 국내에서는 선진외국에 비해 순환골재에 대한 연구데이터와 그를 사용한 현장 적용실정이 매우 부족한 실정이다. 본 논문에서는 현장에서 사용하는 레미콘 사의 가이드 배합에 순환골재를 전량 치환하는 배합비를 추출하여 압축강도를 평가하였 고 추출된 배합비의 순환골재 콘크리트를 원형강관 내부에 충전하여 순환골재콘크리트충전 합성기둥이 국내ㆍ국외 설계식을 반 영한 내력과 비교하여 구조부재로써 사용이 적합하다고 사료되는 결과를 얻었다. 또한, 강관의 콘크리트 구속효과로 인해 강관 내부의 콘크리트 강도가 미세하게 증가함을 확인하였다.

일반적인 구조용 강재의 경우 항복변형률의 이상의 변형을 경험한 이후에 하중을 제거하면 재가력되는 시점에 따라 서 재료의 항복강도는 증가하고 연성이 감소하는 현상을 보인다. 원형강관의 경우 철판을 말아서 제작하는 과정에서 철판의 두 께와 원형강관의 직경에 따라서 항복변형률이상의 큰 변형을 경험하게 되고 이러한 변형은 제작된 강관의 구조적인 성능에 많 은 영향을 미친다. 이러한 이유에서 제작과정에 발생하는 변형이 원형강관의 구조성능에 미치는 영향을 파악할 필요가 있다. 따 라서, 이 연구에서는 원형강관을 제작하는 경우에 발생하는 변형에 의한 철판의 항복강도, 인장강도 및 연성 등의 영향을 파악 하기 위해서 강관의 직경 및 두께와 시험편을 채취한 방향을 변수로 다수의 인장실험을 수행하고 이를 분석하였다. 실험 결과 를 바탕으로 원형강판에서 채취한 시험편은 코일에서 채취한 시험편에 비해 항복강도와 인장강도가 더 높았고, 연신율은 낮아 진 것으로 나타났다.