The objective of this study was to conduct research and analysis using Group Focus Interview to survey the between construction site workers and managers implementing for the Severe Accident Punishment Act. Focused on measures to improve safety management effectiveness for the effectiveness of establishing a safety management system. A plan to improve the efficient safety management system was presented to 50 construction industrial managers and workers. In order to ensure the industrial accident prevention policies appropriately, it is necessary to be aware of safety obligations for workers as well as business operators. In addition, despite the existence of a commentary on the Serious Accident Punishment Act, confusion in the field still persists, so in the event of a major accidents, the obligation to take safety and health education is strengthened, and effective case education is proposed by teaching actual accident cases suitable for actual working sites. It is necessary to make all training mandatory, and it is necessary to reconsider awareness through writing a daily safety log, awareness of risk factors, etc., and writing down risk information. Above all, at the construction ordering stage, it is necessary to keep the construction safety, request corrections and supplements for problems issues that arise, and consult between the orderer and the construction company about the problems issues. Rather than having only the construction company correct or supplement the safety management plan, the contents should be shared with supervisors and workers to establish a more practical solution. Results of this study will contribute to improving the effectiveness of the serious accident and construction safety management system.

The public safety management guidelines were introduced in 2019 and continue to be dedicated to advancing comprehensive measures for public safety management, with a primary focus on prioritizing the safety and well-being of the public within governmental institutions. To achieve this goal, our previous study developed a establishment procedure of risk assessment-based safety inspection system for public institutions that order construction projects and applied it to highway construction projects to evaluate its effectiveness. To enhance the practicality of the establishment procedure, it is essential to collect and analyze feedback from stakeholders regarding its performance and suitability. This study conducted a survey involving 200 participants who had experience with the establishment procedure, and performed statistical analyses to evaluate its performance and applicability. The survey results indicated that the participants reported a high level of satisfaction (scoring 4 and above on a 5-point Likert scale) in several areas: specialization of safety inspection items for different types of work (with a satisfaction rate of 65%), the evaluation process for safety ratings (64.5%), and their willingness to recommend the procedure to other institutions (75.5%). In the factor analysis with Varimax rotation, two factors emerged: (1) a specialization factor related to safety inspection items, and (2) a grading factor associated with safety evaluation results. Regression analyses of these factors unveiled significant positive relationships with improvements in safety and health performance, including the prevention of fatal accidents, heightened safety responsibility, and raised safety inspection standards. The establishment procedure of safety inspection system developed in our previous study can play a crucial role in reducing accidents resulting in fatalities and injuries at construction sites, ultimately contributing to a safer working environment for all involved parties.

Public institutions have a responsibility to ensure the safety of their employees and the public. One way to do this is to implement a systematic safety inspection system based on risk assessments and continuous improvements. This study developed a systematic safety inspection system for public institutions that are ordered construction projects. The proposed system in this study consists of a three-step process: (1) developing safety grade evaluation tables, (2) preparing and conducting safety inspections, and (3) evaluating and improving safety management grades. The first step is to develop safety grade evaluation tables by analysis and diagnosis of the construction site's work type, disaster statistics, and related laws. The second step is to conduct safety inspections using the developed evaluation tables. The third step is to determine the safety management grade based on the results of the safety inspection, and to improve risk factors found during the safety evaluation. The proposed system was implemented in highway construction projects carried out by public institutions. The results showed that the proposed system has two major effects: (1) reducing accident-related deaths and injuries, (2) improving safety management levels by continuous evaluation and improvement. The proposed system can be utilized in construction projects ordered by public institutions to improve the level of occupational safety and health.

Construction industry is considered as one of the most high-risk industries for work-related injuries and fatalities, accounting for more than half of fatalities in Korea. Advanced countries have recognized the critical role of designers in preventing construction accidents and have established regulations on design for safety. In line with this, the Korean government have also implemented regulations that require owners and designers to review the safety of design outcomes. However, it has been observed that designers face challenges in identifying hazards and integrating design solutions at the design stage mainly due to their shortage of required knowledge and skills. This study aimed to examine design solutions that can be applied to prevent fall accidents in the construction industry, and to establish a relationship between these solutions and fatal fall accidents occurred over the past three years in Korea. This study also analyzed the relationships of four variables (construction type, cost, work type, and fall location) with design solutions. The results indicated that all four variables have significant relationships with design solutions, with fall location showing the strongest relationship. The design solutions and their relationships with fatal fall accidents identified in this study can be utilized in identifying hazard and integrating design solutions to ensure design for safety.

Occupational safety and health management expenses in the construction industry are statutory and separately included in the cost statement to prevent occupational accidents and health problems. The expenses are determined by multiplying the standard amount by the rate decided according to construction types and scales. However, the current expense appropriation method does not properly reflect the recent changes in the construction industry such as industry size, industry diversification, and social atmosphere about safety reinforcement. This study surveyed 1579 questionnaires in total and analyzed expense execution rate and proportion of each expense category. The expense execution rate was relative higher in complex construction (e.g., heavy construction = 126%, civil engineering = 125%) and long-period project (equal to or over 48 months construction = 133%) compared to general construction (98~116%) and short-period project (less than 48 months construction = 115%). The proportion of spending expenses was higher in the category of safety manager labor costs (25~52%), safety facility costs (22~40%), and personal protective equipment costs (10~25%). The analysis results of the study can be utilized in revising the standard expense appropriation method by reflecting the current usages of the occupational safety and health management expenses in the construction industry.

This study is to investigate the degree of field awareness of how each provision of the Serious Disaster Punishment Act will affect accident prevention. As a result of conducting a survey of construction site workers, it was analyzed that construction site workers had a low sense of safety and did not voluntarily engage in safety activities. And it can be seen that they are taking a very passive position that it is efficient to implement safety under the supervision of the supervisor. Workers who need voluntary construction site safety activities are most aware of the situation at the site, but the problem was pointed out as “lack of procedures for listening to opinions and preparing improvement measures” for these problems. Future research is needed to see if this is a problem for individual workers or for those in charge of safety and health who do not correct it even though active opinions have been submitted.

This study examined the certification effects of safety and health management system (SHMS) on the establishment level of SHMS and accident statistics in construction industry. This study obtained the establishment level of SHMS for 106 construction companies surveyed from our previous study. In addition, three major accident statistics (mortality rate, accidental mortality rate, and injury rate) for the companies were collected from the database in Korean Occupational Safety and Health Agency. The statistical analysis results revealed that the establishment level for SHMS certified companies was significantly higher than those for uncertified or certification preparing companies. Furthermore, SHMS certified companies showed significantly smaller accident statistics compared to uncertified or certification preparing companies. The results of this study support the positive effects of SHMS on reducing major industrial accidents in construction companies.

The construction industry is considered to be a fatal accident industry, accounting for 28.5% of the total industrial accidents in 2017, as the number of industrial accidents in the construction industry has steadily increased over the past decade. So it is necessary to consider introducing Resilience Engineering, which is actively applied to risky industries around the world, to drastically reduce construction accidents. Although Resilience Engineering, which has emerged as the next-generation safety management centered on Hollnagel since the 2000s, claims the importance of strengthening Resilience abilities considering organizational structure and culture, most studies focus only on developing evaluation indicators. The purpose of this study is to analyze the impact of an organization's safety culture on its Resilience abilities in the construction industry. Specifically, it conducted empirical analysis on the impact of safety culture consisting of ‘communication, leadership and safety systems’ on the Resilience abilities(responding ability, monitoring ability, learning ability, anticipating ability), and the mediation relationship between leadership, communication, and safety system. The survey was conducted on construction workers, and an empirical analysis was conducted on the final 154 responses using SPSS 25 and Smart PLS 3. The results showed that the safety system had a significant impact on all Resilience Abilities, and communication had a significant impact on the remaining three except for anticipating ability among Resilience Abilities. On the other hand, leadership has been shown to have a significant impact on anticipating ability only. In the verifying of the mediation relationship between leadership, communication and safety systems, it was found that leadership affects all Resilience abilities by means of safety systems, but communication can only affect responding ability. This study has practical significance in that it suggests the need for policy-level efforts to introduce and apply Resilience Engineering and then expanded the effective safety management assessment of the construction industry in the future. Moreover, the academic implications are important in that the study attempted to expand the academic scope for a paradigm shift in the future as the safety culture has identified its impact on the Resilience abilities.

In the past, measures for the reduction of industrial accidents has led the safety and health policy of construction sites by the guidance, supervision and the regulation according to「Occupation Safety and Health Act」handled by Ministry of Employment and Labor (MOEL). Nowadays companies realize that due to the factors such as diversification of employment types, outsourcing of hazardous work, new construction method and complicated types of construction, etc., there is a limit on safety management for construction sites as far as it is passively led by the governmental safety management policy and regulation. In this study, in order to practice the autonomous safety management escaping from the government-led safety management, improvement plans are proposed and applied by analyzing the basic cause of the all kinds of fall accidents that could possibly occur in the apartment construction sites and by verifying the hazardous factors and risks by fields.

When the foundation work of the underground part of the building structure or the excavation work of the civil engineering structure is carried out, there is the earthwork work by the inevitable process. As the economic situation continues to develop, construction in urban areas is becoming bigger and higher in scale due to the expansion of infrastructure and the rescue of urban dwellings in urban areas, and excavation of underground roads is inevitable. Excavation of the underground part may cause problems in the process difficulty and safety of the earthworks due to the complexity and various characteristics of the ground selected without consideration of the ground characteristics and site conditions. In order to complete the required facilities, it is necessary to secure the design and construction of the retaining walls. In order to complete the required construction, It is an important factor satisfying construction period and economical efficiency.