This study examines the role of the nano- and micro-particle ratio in dispersion stability and mechanical properties of composite resins for SLA(stereolithography) 3D printing technology. VTES(vinyltriethoxysilane)-coated ZrO2 ceramic particles with different nano- and micro-particle ratios are prepared by a hydrolysis and condensation reaction and then dispersed in commercial photopolymer (High-temp) based on interpenetrating networks(IPNs). The coating characteristics of VTES-coated ZrO2 particles are observed by FE-TEM and FT-IR. The rheological properties of VTEScoated ZrO2/High-temp composite solution with different particle ratios are investigated by rheometer, and the dispersion properties of the composite solution are confirmed by relaxation NMR and Turbiscan. The mechanical properties of 3Dprinted objects are measured by a tensile test and nanoindenter. To investigate the aggregation and dispersion properties of VTES-coated ZrO2 ceramic particles with different particle ratios, we observe the cross-sectional images of 3D printed objects using FE-SEM. The 3D printed objects of the composite solution with nano-particles of 80 % demonstrate improved mechanical characteristics.

Ni-based oxide dispersion strengthened (ODS) alloys have a higher usable temperature and better hightemperature mechanical properties than conventional superalloys. They are therefore being explored for applications in various fields such as those of aerospace and gas turbines. In general, ODS alloys are manufactured from alloy powders by mechanical alloying of element powders. However, our research team produces alloy powders in which the Ni5Y intermetallic phase is formed by an atomizing process. In this study, mechanical alloying was performed using a planetary mill to analyze the milling behavior of Ni-based oxide dispersions strengthened alloy powder in which the Ni5Y is the intermetallic phase. As the milling time increased, the Ni5Y intermetallic phase was refined. These results are confirmed by SEM and EPMA analysis on microstructure. In addition, it is confirmed that as the milling increased, the mechanical properties of Ni-based ODS alloy powder improve due to grain refinement by plastic deformation.

Based on the characteristics of texts, the scholarly history of the Joseon Dynasty is divided into two: one is Jingshu Shiyi (經書釋義 : Commentaries on the Confucian Scriptures of The Four Books and Five Classics) investigating the books of pre-Qin Confucianism and the annotations of Han-Tang period; the other is Yulu Shiyi (語錄釋疑 : Commentaries on the Analects) studying the analects of Song-Ming Neo-Confucianism. Having been recorded in colloquial languages, the analects are particularly significant due to their deep relationships to certain linguistic questions. For this reason, this paper introduces how their inflow and dispersion were made in Joseon and explores their specific aspects since Yulu Shiyi developed and produced a number of great achievements in Joseon’s scholarly history. It was during the Goryeo Dynasty that Neo-Confucianism was introduced to the Korean Peninsula for the first time, and it was not until the late 13th century that the full-scale acceptance of the doctrines began. The inflow process of the analects went through two stages. The first one was the late Goryeo during which Neo-Confucianism resting upon the literature of Zhuxi was introduced. The second one was the early Joseon during which the analects of the Song Neo-Confucianism such as Sishu Wujing Daquan《四書五經大全》 , Xingli Daquan《性理大全》 , Zhuzi Daquan《朱子大全》 , Zhuzi Yulei《朱子語類》 , Xinjing Fuzhu《心經附註》 , etc flew in. The predominant way in which the analects came to be dispersed was the compilation of annotations and dictionaries. As for the former, The Annotation of Zhuzi Yulei《朱子語類考文解義》 and more than a hundred annotation books on Xinjing Fuzhu《心經附註》 appeared; so did The Comprehensive Dictionary of the Analects of the Song Neo-Confucianism《語錄解》 , as for the latter. At the end of the paper, three supplements are presented: the analects of the Song Neo-Confucianism from Jangseogak Archives in the Academy of Korean Studies, the bibliographical directory of the analects and annotations from Kyujanggak Institute for Korean Studies in Seoul National University, and the list of relevant researches in Korea and China.

The improvement of dispersion stability for the primary polishing slurry in a CMP process is achieved to prevent defects produced by agglomeration of the slurry. The dispersion properties are analyzed according to the physical characteristics of each silica sol sample. Further, the difference in the dispersion stability is confirmed as the surfactant content. The dispersibility results measured by Zeta potential suggest that the dispersion properties depend on the content and size of the abrasive in the primary polishing slurry. Moreover, the optimum ratio for high dispersion stability is confirmed as the addition content of the surfactant. Based on the aforementioned results, the long-term stability of each slurry is analyzed. Turbiscan analysis demonstrates that the agglomeration occurs depending on the increasing amount of surfactant. As a result, we demonstrate that the increased particle size and the decreased content of silica improve the dispersion stability and long-term stability.

Cement production processes release various odor elements including acetaldehyde, hydrogen sulfide, formaldehyde and toluene etc. A three-dimensional numerical simulation using a commercial code of Computational Fluid Dynamics (CFD) was used to estimate the concentration profiles and dispersion distance around the local residential area. The calcination furnace, one of the main emission sources in the cement manufacturing process, discharged the odorous gases of H₂S, HCHO, CH₃CHO and C6H5CH₃at levels of up to 3.15 ppb, 5.1 ppm, 6.65 ppm and 0.74 ppm of H₂S, HCHO, CH₃CHO and C6H5CH₃respectively. This study found that as for the emission concentration of 1ppm for H₂S and CH₃CHO, the landing distance of the threshold value for each gas was extended in summer seasons at a low velocity. Low temperature of the flue gas at a high velocity also led to long dispersion.

This study investigates the directional recrystallization behavior of Ni based oxide dispersion strengthened (ODS) alloy according to the zone annealing velocity. The zone annealing temperature is set as 1390oC, while the zone velocities are set as 2.5, 4, 6, and 10 cm/h, respectively. The initial microstructure observation of the as-extruded sample shows equiaxed grains of random orientation, with an average grain size of 530 nm. On the other hand, the zone annealed samples show a large deviation in grain size depending on the zone velocities. In particular, grains with a size of several millimeters are observed at 2.5-cm/h zone velocity. It is also found that the preferred orientation varies with the zone annealing velocity. On the basis of these results, this study discusses the role of zone velocities in the directional recrystallization of Ni base ODS alloy.

This study is conducted as a preliminary research to verify the feasibility of Ti-based Oxide dispersion strengthened (ODS) alloy. Pure-Ti powder is mixed with Y2O3 powder and subsequently, mechanically alloyed at -150oC. The Ti-based ODS powder is hot-isostatically pressed and subsequently hot-rolled for recrystallization. The microstructure consists of elongated grains and Y excess fine particles. The oxide particle size is larger than that of the typical Febased ODS steel. Tensile test shows that the tensile ductility is approximately 25%, while the strength is significantly higher than that of pure Ti. The high-temperature hardness of the Ti-ODS alloy is also significantly higher than that of pure Ti at all temperatures, while being lower than that of Ti-6Al-4V. The dimple structure is well developed, and no evidence of cleavage fracture surface is observed in the fracture surface of the tensile specimen.

Corrosion inhibitors including calcium hydroxide have been used to prevent corrosion in the pipes for tap water supply. The corrosion index (i.e., Langelier Index) differs by area and water quality. The corrosion indices of the areas studied differed by more than 2.0. The ‘homogenized’ calcium hydroxide was added to the treated water at the K water treatment plant, in order to increase the value of the corrosion index and the concentration of calcium. As the result, the concentration of calcium was increased while the turbidity and pH changed little. The corrosion rate of the tap water with the 'homogenized' calcium hydroxide could be slowed down pretty much. The results suggested that the technology of 'homogenization' of calcium hydroxide can applied to tap water and desalinated water to prevent corrosion in water pipes even in corrosive pipes.

Odor dispersion from road emissions were investigated using CFD (Computational Fluid Dynamics). The Shear Stress Transport k-ω model in FLUENT CFD code was used to simulate odor dispersion around the road. The two road configurations used in the study were at-grade and fill road. Experimental data from the wind tunnel obtained in a previous study was used to validate the numerical result of the road dispersion. Five validation metrics are used to obtain an overall and quantitative evaluation of the performance of Shear Stress Transport k-ω models: the fractional bias (FB), the geometric mean bias (MG), the normalized mean square error (NMSE), the geometric variance (VG), and the fraction of predictions within a factor of two of observations (FAC2). The results of the vertical concentration profile for neutral atmospheric show reasonable performance for all five metrics. Six atmospheric stability conditions were used to evaluate the stability effect of road emission dispersion. It was found that the stability category D case of at-grade decreased the non-dimensional surface odor concentration smaller 0.78~0.93 times than those of stability category A case, and that F case decreased 0.39~0.56 times smaller than those of stability category A case. It was also found that stability category D case of filled road decreased 0.84~0.92 times the non-dimensional surface odor concentration of category A case and stability category F case decreased 0.45~0.58 times compared with stability category A case.

Two new synergists are proposed for pigment dispersion in pigment ink. Benzoic acid was applied to Pigment Yellow 74 (PY-74) and Pigment Yellow 150 (PY-150) as a hydrophilic functional group to synthesize (E)-4-(((3-(2-(2-methoxy-4-nitrophenyl)hydrazono)-4-oxopent-1-en-2-yl)(2-methoxyph enyl)am-ino)methyl)benzoic acid (PY-74BA) and (E)-4-((2,4,6-trioxo-5-((2,4,6-trioxohexahydropyrimidin-5-yl)di-azenyl)tetrahydropyrimidin-1(2H)-yl)methyl)ben zoic acid (PY-150BA). Whereas pigment showed extremely low solubility in water and organic solvents like DMSO, DMF and methanol, two synergists were found to have higher solubility than pigment. This result can be interpreted as reduction of particle aggregation by increased polarity. Two synergists applied to pigment ink are expected to improve dispersion property and storage stability of ink.

The dielectric medium used in electrophoretic displays (EPDs) is required to be an environmentally friendly solvent with high density, low viscosity, and a large electric constant. Hydrofluoroether, a highly fluorinated solvent with eco-friendly characteristics, is regarded as a viable alternative medium for EPDs, owing to the similarity of its physical properties to those of the conventional EPD medium. Surface modification of particles is required, however, in order for it to disperse in the charged solvent. Also, positive/negative charges should be present on the particle surface to enable electrophoretic behavior. In this study, carbon black particles wrapped with positively charged nitrogen (N-CBs) were fabricated by a simple hydrothermal process using a poly(diallyldimethylammonium chloride) solution as a black coloring agent for the EPD. The dispersion behavior of N-CBs was investigated in various solvents.

Air pollution dispersion from rooftop emissions around hexahedron buildings was investigated using computational fluid dynamics (referred to hereafter as CFD). The Shear Stress Transport (referred to hereafter as SST) k-ω model in FLUENT CFD code was used to simulate the flow and pollution dispersion around the hexahedron buildings. The two buildings used in the study had the dimensions of H: L: W (where H = height, L = length, and W = width) with the ratios of 1:1:1 and 1:1:2. Experimental data from the wind tunnel obtained by a previous study was used to validate the numerical result of the hexahedron building. Five validation metrics are used to obtain an overall and quantitative evaluation of the performance of SST k-ω models: the fractional bias (FB), the geometric mean bias (MG), the normalized mean square errors (NMSE), the geometric variance (VG), and the factor of 2 of the observations (FAC2). The results of vertical concentration profile and longitudinal surface concentration of the 1:1:2 building illustrate the reasonable performance for all five metrics. However, the lateral concentration profile at X = 3H (where X is the distance from the source) shows poor performance for all of the metrics with the exception of NMSE, and the lateral concentration profile at X = 10H shows poor performance for FB and MG.

Stable slurries of YSZ in aqueous suspension with added polymer dispersants, namely, poly-methacrylic acid ammonium salt (PMMA), poly-acrylic acid (PAA) and poly-acrylic-co-maleic acid (PAMA), were mixed with the monomolecular dispersants citric acid and oxalic acid. The dispersion properties of the suspension were investigated using PSA, viscosity, sedimentation, and FT-IR. The polymer dispersants and monomolecular dispersants were attached to the YSZ surface by the carboxylic group, as shown by the FTIR results. A stabilized aqueous suspension was obtained when the polymer dispersant and citric acid were mixed and compared to the use of citric acid alone as a dispersant agent. When the polymer dispersant and citric acid were mixed and milled through attrition milling, there was a smaller particle size compared to when the polymer dispersant alone was used as a dispersant agent. This study determined that the particle size of the mixed dispersant was affected by the properties of the monomolecular dispersant and that the stability of the suspension was affected by the polymer dispersant. However, when slurries of YSZ were mixed with oxalic acid, the particle bridging behavior was the result of the high degree of viscosity and the small sedimentation height.

In order to expand the application of oxide dispersion-strengthened (ODS) steel, a composite material is manufactured by adding mechanically alloyed ODS steel powder to conventional steel and investigated in terms of microstructure and wear properties. For comparison, a commercial automobile part material is also tested. Initial microstructural observations confirm that the composite material with added ODS steel contains i) a pearlitic Fe matrix area and ii) an area with Cr-based carbides and ODS steel particles in the form of a Fe-Fe3C structure. In the commercial material, various hard Co-, Fe-Mo-, and Cr-based particles are present in a pearlitic Fe matrix. Wear testing using the VSR engine simulation wear test confirms that the seatface widths of the composite material with added ODS steel and the commercial material are increased by 24% and 47%, respectively, with wear depths of 0.05 mm and 0.1 mm, respectively. The ODS steel-added composite material shows better wear resistance. Post-wear-testing surface and cross-sectional observations show that particles in the commercial material easily fall off, while the ODS steel-added material has an even, smooth wear surface.

개미가 종자를 분산시키는 춘계단명식물 깽깽이풀과 현호색의 전파체 특성, 종자분산 및 발아특성을 밝히고자, 2014년 4월부터 2015년 6월까지 열매 수집, 전파체의 전처리에 따른 포장발아율을 조사하였다. 깽깽이풀의 전파체는 5mm 정도의 황갈~암갈색의 장타원형 종자에 부정형의 백색 지방체가 붙어 있고, 전파체는 15.86mg, 종자는 13.46mg, 지방체는 2.40mg 등의 평균값을 보였으며 지방체의 중량비는 15.13% 였다. 현호색 전파체는 지름이 1.2mm 정도의 광택이 나는 검은색 난형의 종자에 주걱형의 백색 지방체가 붙어 있고, 전파체는 2.58mg, 종자는 2.05mg, 지방체는 0.53mg 등의 평균값을 보였으며, 지방체의 중량비는 20.54% 였다. 털왕개미와 곰개미가 깽깽이풀 전파체를 물어가고, 곰개미와 고동털개미가 현호색 전파체를 물어갔다. 깽깽이풀의 발아율은 지방체 제거 유무에 무관하며, 전처리와 파종 시기 간에는 1% 유의수준에서 통계적 유의성이 인정되었다. 6월 20일에 파종에서, 깽깽이풀은 평균 발아율은 65%, 8월 19일 파종에서는 17.50%, 10월 20일 파종에서는 전혀 발아하지 않았다. 현호색의 발아율은 지방체 제거 유무 간에 5%, 파종시기 간에는 1% 유의수준에서 통계적 유의성이 인정되었다. 무처리구에서 평균 54.17%가 발아하였고, 지방체를 제거한 처리구에서 평균 35.0%가 발아하였다. 6월 20일에 파종에서 발아율은 75%, 8월 19일 파종에서 53.75%, 10월 20일 파종에서 5.0%가 발아하였다. 개미가 종자를 분산시키는 춘계단명 식물종의 발아는 성숙하여 종자가 낙하하는 시기에 개미들이 개미집으로 부지런히 물어가는 것을 고려할 때 채종 후 곧바로 파종하는 것이 이들 식물종들이 진화해온 특성에 적합한 방법이며, 가장 높은 발아율을 확보할 수 있는 방법이라 판단된다. 개미가 종자를 분산시키는 춘계단명 식물종들은 개미와의 상리공생을 위하여 지방체를 생산하여 종자에 부착하고, 개미에 의하여 적온적습한 환경조건, 개미집,으로 이동되어 배가 충분히 자라서 이듬해 봄에 발아에 성공하는 것이라 판단된다.

The Cellulose Nanocrystal (CNC) of dispersion condition is important factor when reinforce concrete or cement composite as CNC, because it is closely related to the strength reinforcement. Before the CNC is utilized to reinforcement of concrete or cement composite, it is essential to evaluate the dispersion properties. Therefore, the objective of the present study is to evaluate the dispersion of CNC. In this experiment, the specimen was prepared to the type of CNC suspension in accordance with weight ratio of CNC and the dispersion time of sonication. The first property, the dispersion properties of CNC, was evaluated by measuring turbidity and absorbance. The second property, the dispersion stability, was measured through the sediment time.

The purpose of this study is to investigate the optimum conditions of dispersion and strength to maximize the mechanical properties of woody cellulose nano–crystal (CNC). As a dispersing method, ultrasonic dispersing machine and magnetic stirrer were used as the mechanical dispersion method. The mixing ratio of cellulose nano-crystals (CNCs) was 0.2% and the dispersion time was 10 minutes. Steam curing was carried out for 6, 24 and 48 hours. Based on the experimental results, we will propose source technology regarding CNC for construction materials.

해상으로 운송되는 위험유해물질 (HNS, Hazardous and Noxious Substance)은 6,000여종 이상으로 많은 종류를 포함하고 있으므로, 유출시 대응전략 수립을 위한 HNS 거동 및 위험반경 예측을 결정론적으로 제시하기 어렵다. HNS 거동예측에서는 예측의 신속성과 효율성을 고려하여 차이가 미미한 모든 종류의 HNS 특성을 모두 고려하는 대신에 거동에 크게 영향을 미칠 수 있는 특성들에 초점을 맞쳐 대표적인 거동예측 모델을 개발하여 적용할 필요가 있다. 본 연구에서는 HNS를 기체상, 액체상, 고체상 등 크게 3분류로 구분하고, 각각의 분류별 거동특성 모델링을 연구하였다. 물질 특성별 거동특성은 증기압, 용해도, 밀도 등을 고려하였으며, 각각의 변수에 따른 증발, 혼홥, 침강 등의 거동을 모델링하였다. 물질의 거동특성 모델링은 대기 해양 확산모델의 계산에서 대기중 확산, 수중 확산, 해저면 침적 등을 결정하는 과정으로 활용된다.