Due to climate change and the expansion of cultivation areas through the use of reclaimed land, changes in the selection of Italian ryegrass (Lolium multiflorum L.) varieties are anticipated. This study was conducted to compare the growth characteristics before overwintering, productivity, and feed value of eight Italian ryegrass varieties with different maturing stages under the same cultivation conditions. The variety ‘Lm4ho’, a medium-maturing type, showed superior growth characteristics before overwintering, including plant height, leaf length, and leaf width. The heading date was advanced in all varieties, with a greater degree of advancement observed in varieties with earlier heading dates. When harvested at the heading stage of the early-maturing types, the dry matter yield of the medium-maturing types was not significantly different from that of the early-maturing types. However, when harvested at the heading stage of the medium-maturing types, the dry matter yield was higher than that of the early-maturing types. Specifically, ‘Lm4ho’ produced 2,518 kg/ha more than ‘Kowinearly’. The late-maturing variety IR901 and the medium-maturing varieties ‘Lm4ho’ and ‘Kowinmaster’ showed statistically superior dry matter yields. In terms of forage value, including crude protein (CP), total digestible nutrients (TDN), and relative feed value (RFV), the medium- and late-maturing types outperformed the early-maturing types. Notably, ‘Lm4ho’, ‘IR 901’, and ‘Hwasan 104’ were evaluated as suitable varieties for high-quality forage production. These results suggest that medium-maturing varieties may be suitable for double cropping in the central regions due to climate change. We propose that future breeding of Italian ryegrass should expand from focusing on cold tolerance and early-maturing varieties to include mediumand late-maturing varieties that consider both productivity and quality.

The objective of the present study was to evaluate the effect of storage type and period on the quality of rye hay. The rye “Gogu” was sown on October 15, 2020, and harvested on April 22, 2021 (heading stage). The rye hay was prepared in two wrapping conditions (wrapping and unwrapping) and two storage period (3 and 6 months). In regards to their visual appearance, the forage quality score was higher in wrapped rye hay than in unwrapped rye hay. In all groups, there was no difference in appearance between inside and outside. The moisture content of wrapped rye hay was maintained at the initial level until 6 months. However, the moisture content of unwrapped rye hay was increased at 3 months of storage, and then decreased at 6 months of storage. Crude protein content was higher in wrapped rye hay than in unwrapped rye hay, whereas NDF and ADF contents were lower within wrapped rye hay than within unwrapped rye hay (p<0.05). In conclusion, wrapping rye is effective method for long-term storage that reduces the effect of external environment.

The optimal determination of seeding rate is critical to minimizing uncertainties about the large variations observed in forage quality and productivity when alfalfa is cultivated under different geographical areas and growing conditions. The objective of this investigation was to provide information about the proper seeding rate according to harvest timing for alfalfa cultivation in the Northern regions of Korea. Alfalfa was sown in September 2018 at a seeding rate of 20, 30 or 40 kg/ha and harvested four times in 2019: May 3, July 2, September 11, and October 13. Regardless of seeding rate, alfalfa plant height was longest at the third harvest (113 cm) and the shortest in the last annual harvest (43.8 cm). However, seeding rate had no effect on alfalfa plant height at any harvest. Forage relative feed value was increased in the first cutting but decreased in the third cuttings as seeding rate increased. However, seeding rate had slight effect on alfalfa forage quality components at the second and fourth cuttings. Total annual DM and crude protein production (in 4 harvests) was greater at higher seeding rates. Plots seeded at a rate of 40 kg/ha produced on average 1,257 and 2,620 kg/ha more forage (DM basis) than those seeded at a rate of 30 or 20 kg/ha, respectively. Forage DM production at the first, second, third, and fourth harvests accounted for 36.1, 24.0, 27.1, and 12.8 % of total annual DM production, respectively. Overall, small differences were seen when alfalfa seeding rate was different but maximum forage DM production (in four harvests) was detected when seeding rate was 40 kg/ha. These data could be useful to the alfalfa growers by allowing them to make more accurate trade-offs between seed price and the expected magnitude of forage yield gains in order to select the best seeding rate.

Cutting management has been identified as a critical factor in the alfalfa production systems because it has a significant impact on maximizing yield and maintaining the forage quality. The objective of this experiment was to determine the proper cutting height according to harvesting time for optimizing nutrient yield and forage nutritive quality of alfalfa grown in alpine regions of Korea. Alfalfa was sown at a seeding rate of 30 kg/ha in August 2018 and harvested at four cuttings in 2019 (3 May, 2 July, 11 September, and 13 October). Cutting heights were adjusted at 5, 15, and 25 cm above the soil surface. Alfalfa plant was tallest at the third cutting (109 cm), which was on average 35 cm taller than the first or second cutting. Relative feed value (RFV) remained unaffected by cutting height at the first harvest, but increased consistently in subsequent harvests as cutting height increased. Alfalfa collected at the first and fourth cuttings had the highest RFV (mean 152), which was on average 8 and 67 units higher than the second and third harvests, respectively. At each harvest, in vitro dry matter digestibility was highest in alfalfa cut at a 25-cm height. Dry matter (DM) production at each cutting height was highest in the first cutting, accounting for on average 36-37% of total annual DM production, and lowest in the fourth harvest, accounting for about 11-13% of the total DM yield. The total dry matter production (in four harvests) was 4,218 kg/ha higher when alfalfa was subjected to a cutting height of 5 cm rather than 25 cm. Cutting height had no effect on total crude protein yield, but from the first to fourth cutting, the protein yield followed a decreasing trend. Finally, there were visible declines in forage nutritive quality when alfalfa was cut at a shorter height. However, the magnitude of difference in total forage yield may outweigh the slight decline in forage quality when alfalfa is cut at a lower height. The findings of this study could help the alfalfa growers make better harvest management decisions.

Cattle feeding in South Korea has been heavily dependent on domestically produced rice straw and imported grain. Around 42% of domestically produced rice straw is utilized for forage, and the remainder is recycled to restore soil fertility. Approximately 35% of round baleages were made with rice straw. However, higher quality hay is desired over rice straw. Due to increasing stockpiles of rice, there has been an economic burden on the government to store the surplus; therefore production of annual forage crops in rice fields has been further promoted in recent years. Hay import from the USA currently constitutes more than 80% of total imported hays. The main imported hays are alfalfa (Medicago sativa), timothy (Phleum pretense), and tall fescue (Festica arundinacea). The estimated forage required for cattle feeding was approximately 5.4 million MT in 2016. Domestically produced forage sates only 43% of that value, while low quality rice straw and imported hay covered the rest of demand by 33% and 20%, respectively. As utilization of domestically produced forage is more desirable for forage-based cattle production, long-term strategies have been necessary to promote domestic production of high quality baleage. One such strategy has been utilizing the fertile soil and abundance of fallow rice fields of western region of S. Korea to produce forage crops. Italian ryegrass (Lolium multiflorum) is the most successfully produced winter annual in the region and is approximately 56% of the total winter annual forage production. Forage sorghums (Sorghum bicolor), sorghum × sudangrass hybrids, and hybrid corn (Zea mays) produce a substantial amount of warm-season forage during summer. Produced forage has been largely stored through baleage due to heavy dew and frequent rains and has been evaluated according to S. Korea’s newly implemented baleage commodity evaluation system. The system weighs 50% of its total grading points on moisture content because of its importance in deliverable DM content and desirable baleage fermentation; this has proved to be an effective method. Although further improvement is required for the future of forage production in South Korea, the current government-led forage production in rice fields has been able to alleviate some of the country’s shortage for quality hay.

These experiments were to investigate the variations of rye on forage quality, productivity and β-carotene concentration affected by maturity in Pyeongchang region. Limited information are available about how forage quality and β-carotene content are affected by various factors. Samples were collected from rye harvested every 5 days, from April 25 to May 31 (April 25, April 30, May 4, May 9, May 15, May 21, May 25 and May 31). Dry matter (DM) content, plant height, DM yield and total digestible nutrient (TDN) yield increased continuously with the progressed maturity. However, crude protein (CP) content, in vitro dry matter digestibility (IVDMD) and relative feed value (RFV) decreased markedly with the delay of harvesting, while TDN content decreased from April 25 till May 15, then followed by a stable fluctuation. Conversely, acid detergent fiber (ADF) and neutral detergent fiber (NDF) value increased and then fluctuated slightly after blooming stage. For quality of plant parts, stem contained the lowest CP content and RFV value, and the highest ADF and NDF contents compared with other parts, while the grain showed the higher CP, IVDMD, RFV and lower fiber contents than others. With the plant matured, leaf proportion decreased while stem and grain proportion increased, and feed value of all the three parts decreased till blooming stage and followed by a stable phase. β-carotene concentration showed its highest on jointing stage, and then fell down sharply on the sequential stages. In conclusion, harvest around May 15 (blooming) is proper for forage rye if directly consumed by livestock as green chop in Pyeongchang under the consideration of both nutritive yield and forage quality.

This experiment was conducted to a comparison of the productivity according to variety and forage quality by plant parts of imported silage corn (Zea mays, L) in Pyeongchang. The corns evaluated in this experiment were 8 varieties (P1184, P1151, P1194, P1543, P1345, P1429, P1443, and P2105) introduced from the United States, Pioneer Hybrid Co. The harvested corn was divided into 5 plant parts (leaf, stem, cob, husk, and grain), and the ratio of each part was calculated using dry weight and the feed value was analyzed. The emergence rate of corn was generally good except for the P1151 and P2105 varieties. The average tasseling date was July 24th and the silking date was July 27th, but the P2105 variety was late to July 28th and August 1st, and the remaining varieties were similar. P1345 was the highest (289 and 123 cm), and P1151 varieties were the lowest (267 and 101 cm) in the plant and ear height. Disease resistance was low in P1184, P1443 and P1429, and P1197 and P1345 were high. In the case of stover, the dry matter (DM) content was the lowest at 19.6% in the P1151 and the highest at 24.9% in the P1429. DM content of ear was the highest in the P2105 (55.5%), and P1184 (54.2%) and P1345 (54.3%) were also significantly higher (p<0.05). The DM yield of stover of P2105, P1429 and P1194 varieties was significantly higher (p<0.05), and ear yield of P2105, P1345 and P1443 was higher. The proportions of each part of plants (leaf, stem, cob, husk, and grain) divided by 5 was high, with 50-60% of the ear(grain+cob) ratio. The ratio of husk and cob was roughly similar, and the leaf and stem part showed a ratio of about 20%. The crude protein (CP) content was highest in leaf, followed by grain. The CP content of the stem was the lowest, and the husk was not significantly different among the varieties (p>0.05). The acid detergent fiber (ADF) content was similar to the rest parts except grain, but the leaf part tended to be lower, and other parts except the stem and leaf showed no significant difference between varieties (p>0.05). There was no significant difference in NDF (neutral detergent fiber) content in husk, but there was a difference between varieties in other parts (p<0.05). In addition, there was a special difference by plant parts for each variety, P2015 on the stem, P1197 on the leaf, P1151 on the cob, P1197 on the husk, and P1197 on the grains with high NDF content. IVDMD (in vitro dry matter digestibility) was not significantly different between stems and grains, but there was a difference between varieties in cobs and husks. According to the results, DM yield of P2105 variety was the best in the experiment, and the ratio of grain was excellent in P1543 and P1345. In addition, it was found that the feed value was higher in the leaves and grains, and the leaf and stem had higher feed values than husk or cob.

In this experiment comparison was made for the agronomic characteristics and quality of forage rye among the different growing stages. Rye was harvested every 5 days, then separated into three parts and determined the quality. Before harvesting, plant height and yield were recorded. Dry matter yield increased continuously, while fresh matter yield decreased after heading. ADF and NDF value increased before blooming and then showed a slight fluctuate. In addition, highest CP content appeared on jointing stage. TDN and RFV went down until blooming stage and then showed a steady trend. So the proper harvest time is from heading to blooming stage for forage rye.

This experiment was carried out to determine the effect of organic fertilizer and seed mixture on productivity, botanical composition and forage quality in middle areas(Geumsan, 250m sea level) pasture. Total six experimental pastures (orchardgrass, timothy and tall fescue based seed mixture and with or without organic fertilizer) were established in autumn, 2014 and evaluated productivity and agronomic characteristics from 2015 to 2016. Plant heigh was higher in orchardgrass based mixture and orchardgrass and tall fescue based mixture were higher in 2nd harvest. There was not found the significant difference among treatment(P<0.05) in dry matter (DM) content. Botanical composition in 1st harvest was higher weed portion in orchardgrass based mixture and legumes was disappeared at 3rd harvest in all treatments. Fresh and dry matter yield was higher in 2nd year than 1st year. In 1st year, orchardgrass based mixture with organic fertilizer plot was the highest(P<0.05) DM yield, but tall fescue based mixture with organic fertilizer was the highest in 2nd year. Content of crude protein (CP) was the highest in tall fescue based mixture and Timothy based mixture showed low in ADF (acid detergent fiber) and NDF (neutral detergent fiber) content. But the content if in virto dry matter digestibility was higher than others. In 2nd year, the nutritive value of 2nd and 4th harvested grasses were higher and average RFV (relative feed value) value was the highest at 4th harvest. According to this result, orchardgrass and tall fescue based mixture would be recommendable for farm who considering productivity and timothy based mixture would be recommendable for considering forage quality in middle areas of Korea.