The CTBTO is the Comprehensive Test Ban Treaty Organization to ban all forms of nuclear testing (underwater, air, and underground) worldwide and was adopted at the UN’s 50th annual general meeting in September 1996. As of September 2023, 187 out of 196 countries signed and 178 ratified. The Republic of Korea signed it in 1996 and ratified it in 1999. Several major Annex 2 countries still need to ratify it, and certain countries have not even signed it, so it has not come entry into force. The CTBTO has three verification systems for nuclear tests and consists of the International Monitoring System (IMS), the International Data Center (IDC), and On-Site Inspections (OSI). IMS consists of seismic, hydroacoustic, infrasound, and radionuclide monitoring. The measured data are delivered to IDC, analyzed by CTBTO headquarters, distributed raw data, and analyzed forms to member states. The final means of verification is in the field of OSI and will be operated when CTBT takes effect. Based on the IMS data, inspectors will be dispatched to the Inspected State Party (ISP) to check for nuclear tests. KINAC is attending the Working Group B, OSI technology development verification along with KINS and KIGAM. Since OSI is a means for final verification, integrated capabilities such as seismic and data interpretation and nuclides detection are required. CTBTO continues its efforts to foster integrated talent and modernize OSI equipment. Types of equipment include measurement, flight simulation equipment, and geographic information monitoring systems etcetera. KINAC is also developing equipment to detect contaminated areas using drones and probes. Development equipment is the nuclides detection and measurement of contaminated areas, and it is the equipment that prepares a control center and drops probes into suspected contamination areas to find a location of the radiation source. The probe can be used to track the location where the dose is most substantial through Bayesian estimation and source measurement.

Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance (electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, design and manufacture of electronic beam filament total inspection equipment for mass production were dealted with.

In this study is a study to measure the section by voltage through the high integration of the circuit of the inspection equipment for the power supply circuit of semiconductor equipment. The experiment was conducted by increasing the -1.5∼4 voltage section by 0.5V. At this time, the tolerance was applied to ±0.1%+5mA. Although the voltage increased through the experiment, the accuracy of the measurement data did not change, and it was confirmed through this experiment that the null hypothesis(H0) was adopted in each section through the hypothesis test.

This study deals with replacement analysis of deteriorated equipment for improving productivity of production system. Frequent breakdown of the deteriorated equipment causes a situation that reduces productivity such as low product quality, process delay, and repair cost. However, the replacement of new equipment will be required a high initial investment cost, so it is important to analysis the economic feasibility. Therefore, we analyze the effect of the production system due to the aging effect of the equipment and the feasibility of equipment replacement based on the economic analysis. The process flow, working time, logistics movement, etc. are analyzed in order to build the simulation modeling for a ship and land switchboard production system. Using numerical examples, the economic feasibility analysis of equipment replacement through replacement of existing deteriorated equipment and additional arrangement of new facilities is performed.

This paper suggests a specific model that could efficiently improve the interaction and the interface between MES(Manufacturing Execution System) server and POP(Point of Production) terminal through electronic document server and electronic pen, bluetooth receiver and form paper in disassembly and process inspection works. The proposed model shows that the new method by electronic document automation system can more efficiently perform to reduce processing time for maintenance work, compared with the current approach by handwritten processing system. It is noted in case of the method by electronic document automation system that the effects of proposed model are as follows; (a) While the processing time per equipment for maintenance by the current method was 300 minutes, the processing time by the new method was 50 minutes. (b) While the processing error ratio by the current method was 20%, the error ratio by the new method was 1%.

In order to secure competitiveness of companies in the semiconductor industry, state management of equipment is one of the most important key factors. Particularly, after carrying out preventive maintenance (PM) work to maintain the best equipment condition, process reliability inspection is carried out. This work must be performed manually by the intervention of the operator. This inspection work is becoming more and more difficult due to the difficulty of the manufacturing worker, the increase of the simple repetitive workload, and the increase of the inspection items for the engineer, as the condition and the procedure continuously change as the semiconductor scaling down. Therefore, we would like to carry out an empirical study on the construction of an automatic inspection system in order to carry out the more reliable and efficient inspection procedure by eliminating the problems and unreasonableness of the past based on the investigation and analysis of the work procedures and conditions of the existing manual method.

Self-Inspection is being used in the workplace hazardous, dangerous machinery and equipment to build capacity for the voluntary safety risks due to use of machinery and prevention of industrial accidents that inspect facilities for safety issues, is to check. However, December 31, 2008 as part of Article 36 of the Occupational Safety and Health Act (safety inspection), the financial vanish as the self-test, Safety inspection program has been changed., In each individual workplace that creates its own standards and regulations to use the existing inspection system is in some cases. This study is located in the southeast industrial complex as a risk reducer manufacturer, machine-based target zones in S Corp owns most of the crane based on the results of the tests is to analyze the problem. Then check the results - to bring its measures and information you need to know for sure is to propose.

공연장의 무대기계설비 시스템 및 조명장비 시스템 설치 완료 후 각 시스템의 최종 검사에 적용되는 검사 기준과 검사 방법을 명시함으로써 효율적으로 최종 설비 상태 를 점검하고, 발주처의 최종 검사에 효과적으로 대비할 수 있게 하고 안전사고를 미리 예방할 수 있게 하기 위하여 연구하였다.

원자력 발전소 증기발생기 2차측의 전열관에서 생길 수 있는 슬러지나 침전물의 양을 정량적으로 분석하고 측정하기 위해 레이저 거리 측정기(laser range finder)를 이용하여 피사체의 기하학적 정보를 얻을수 있는 원격 검사 장치를 개발하였다. 이 장치는 거리 측정부와 영상 획득부로 이루어져 있다. 거리 측정부의 광원으로는 654nm 반도체 레이저를 사용하였고, 광 검출 은 3.6×3.6mm 크기의 silicon pin diode를 사용하였다. 영상 획득부의 CCD 카메라로는 29만 화소의 고성능 카메라를사용하였다. 본 연구에서는 피사체의 크기 측정 및 피사체에서 반사된 반사광량의 측정을 통해 거리 측정부의 성능을 알아보고, 영상 획득부에 각도 변화를 주어 명확한 영상 획득의 가능성에 대해 실험을 하였다. 실험 결과 얻어진 피사체의 크기는 실제 값과 약 2.8% 이내의 범위에서 일치하였다.

This study was planned to investigate what the main factor of the regulation compliance of inspection on harmful machine, instrument and equipment by industrial safety and health act is. This study subject was composed of three groups as employers, employees of manufacturing and using the harmful machine and safety inspectors. Manufacturing workplace were 236 places, using workplace were 201 places and the safety inspectors were 100 people. The study subject was sampled by stratified random sampling considering the type of harmful Machine. Data for analysis is collected from each sample using interview with structured questionnaires. Compliance is measured by 2, 3, and 4 point scale composed by 8 sub items such as general perception, understanding, clearness, necessity, relevancy, implementation, penalty, and general compliance of the regulation. The level of 8 items of employer's compliance are not differentiated among three groups. The determining factors for inspection observance of the workplace using the harmful Machine were understanding, penalty and cognized compliance. The determining factors for inspection observance of the workplace manufacturing the harmful Machine were understanding and object conformity. These results show that the strategy to adapt the regulated group to inspection regulation will be the elevation of understanding for regulation first of all.

In this paper, the on-site applicability review was carried out on the actual site so that the inspection equipment for inspection of tunnel vertical-type vent can be developed to promote the safety of the inspection engineer and improve the inspection cost.

Bridge inspection based unmanned aerial vehicle (UAV) has received considerable attention due to its several advantages such as reliability and safety as well as saving time and cost. An unmanned inspection equipment for bridge inspection is composed of UAV and imaging devices such as RGB cameras and infrared cameras. However, many challenging issues should be solved in order to apply this technology to the field. In this paper, an UAV based crack detection method is investigated. To detect the cracks, the image processing techniques with deep learning algorithm are used. To build the spatial information of aging bridge, 3D point cloud based background model is generated.

There are some risk and inefficiency when inspectors make an inspection of the bridge. To remove the risk, many demonstration studies of bridge inspection based on the unmanned inspection equipment are actively in progress recently. Because the unmanned aerial vehicles enable the inspectors to be more safe. This study investigates the demonstration project of bridge inspection based on the unmanned inspection equipment in USA and Japan.

In this study, the integrated management code of damage information in bridges using the data from unmanned inspection equipment (i.e., drone with hybrid imaging equipment) was proposed. It was found that the integrated management code could be used in developing bridge management system based on 3-dimensional information model of bridge.

In this study, the integrated management code of damage information in bridges using the data from unmanned inspection equipment (i.e., drone with hybrid imaging equipment) was proposed. It was found that the integrated management code could be used in developing bridge management system based on 3-dimensional information model of bridge.