The preliminary study was conducted on the use of navigation instruments and programs conducted in the previous demonstration and experiment of the training ship SAEBADA, real-time sharing and accuracy of land and sea information, and the development of real-time effective information transmission and reception and management system programs. Based on this, this study used the training ship CHAMBADA, which is similar in length to the tonnage of the fishing boat. The purpose is to present errors in ship situation-specific information data, alarm systems for marine information, and land and ship transmission and reception programs collected using intelligent information management systems to find out whether they can be applied and used in fishing boats. It plans to conduct research on direct and indirect safety and ship’s stability when the intelligent information management system operates in real time in the operation of ships considering the characteristics of small fishing boats and the characteristics of fishing.

The need for an intelligent information-based ship accident prevention and control system for various marine accidents is very clearly emerging. As it is a variety of marine accidents, the causes are diverse. Therefore, it can be said that it is very important to prevent these marine accidents and their causes in advance. Therefore, a study was conducted on an intelligent information-based ship safety management decision support system that provides information necessary for decision-making at sea and land through an integrated management device for ships that informs safety-related risks in real-time ship operation. In the future, we intend to pursue the development of a system that can aim for safer and more economical ship operation by linking it to navigation instruments through the evaluation and analysis of AI, IoT, and big data.

The use of Project Management Information System (PMIS) is increasing in project management industries such as construction, defense, manufacturing, software development, telecommunication, etc. It is generally known that PMIS helps to improve the quality of decision making in project management, and consequently improves the project performance. However, how much and which parts of project management performance are affected by PMIS still need to be studied further. The purpose of this study is to investigate the impact of PMIS quality on project management performance. We collected data from various project based industries such as construction, defense, manufacturing, software development and telecommunication by using survey questionnaire. PMIS quality was measured in three dimensions. They are system quality, information quality and service quality. Project management performance was measured in nine variables such as time reduction, work accuracy, cost management, etc. Statistical analyses such as multiple regression were used to analyze the data. The results showed that PMIS quality had significant impacts on the project management performance and user satisfaction. It was notable that only two dimensions out of the three PMIS quality dimensions, system quality and information quality, affected the project management performance. Also, it was found that PM performance played a mediating role between PMIS and user satisfaction, and between PMIS and reuse intention. The contribution of this research is that it helps to clarify what aspects of PMIS affect the project management performance and user satisfaction.

Internet of Thing(IoT), which is recently talked about with the development of information and communication technology, provides big data to all nodes such as companies and homes, means of transportation etc. by connecting all things with all people through the integrated global network and connecting all actual aspects of economic and social life with Internet of Thing through sensor and software. Defining Internet of Thing, it plays the role of a connector of providing various information required for the decision-making of companies in the cloud computing environment for the Insight usage by collecting and storing Raw Data of the production site through the sensor network and extracting big data in which data is accumulated and Insight through this. In addition, as the industry showing the largest linkage with other root industries among root industries, the mold industry is the core technology for controlling the quality and performance of the final product and realizing the commercialization of new industry such as new growth power industry etc. Recently, awareness on the mold industry is changing from the structure of being labor-intensive, relying on the experience of production workers and repeating modification without the concept of cost to technology-intensive, digitization, high intellectualization due to technology combination according to IT convergence. This study, therefore, is to provide a golden opportunity to increase the direct and indirect expected effects in poor management activities of small businesses by actually implementing and managing the entire process of mold life cycle to information system from mold planning to mass production and preservation by building SME(small and medium-sized enterprises)-type mold life cycle management information system in the cloud computing environment and applying it to the production site.

해상에서의 통신 환경이 개선되면서, 온라인 기반의 응용 소프트웨어에 대한 개발의 필요성이 고조되고 있다. 특히 전자해도는 해상온라인 애플리케이션에서 중심적 위치를 차지하고 있다. 본 연구에서는 중소형 선박을 위한 스트리밍 전자해도 개발에 필요한 관련 기술을 도출하고, 국내외 개발 과정과 동향을 파악하고자 했다. 지리정보시스템을 이끌고 있는 두 기관, OGC와 OSGeo의 수행 프로젝트, Ajax 기법, 메르카토르 도법과 전자해도 기술 일반을 검토…

우이산호와 같이 특수 해양시설물인 유류터미널과 선박 간의 해양사고는 대규모 해양오염 발생으로 이어져 해당 기업에 심각한 손실을 끼치며 대형 환경오염을 수반한다. 본 연구는 대상선박을 실시간 모니터링하고 사고위험을 사전에 식별하여 항만시설물을 포함한 단계별 비상 대응이 가능한 유류부두 안전관리 종합정보시스템 개발을 제안한다. 해당 시스템은 선체, 선박운항자 및 유류터미널 시설물까지 유기적으로 통합된 능동적인 안전감시시스템으로 해상교통 모니터링과..

There are insufficient models that find problems and solutions for accident prevention through risk assessment and suggest safe work process and work instruction from foundation works to finish work for accident decrease. This paper presents a quantitative risk assessment model by analysis of risk factors in each process such as appurtenant works, temporary works, structural works, equipment work, finishing work and etc based on accident examples and investigation on actual condition in plants construction work. In addition, the safety management system was developed to perform risk assessment of plants construction and use it for effective safety training for labor.

This paper reviewed the relationship between information technology system and knowledge management activities, and the moderating effect of industrial type. The results of multiple regression analysis, based on the responses from 219 employees in manufacturing and financing service sector, showed that information technology infrastructure and information technology usage have positive effects on knowledge acquisition, knowledge transfer, and knowledge usage. In moderating effects, information technology infrastructure more positively related with knowledge acquisition in financing service sector than in manufacturing sector. And also information technology usage more positively related with knowledge transfer in financing service sector than in manufacturing sector.

글로벌 IS 소싱이 확산됨에 따라 다국적 팀원들로 구성된 글로벌 프로젝트 팀이 급격히 늘어나고 있다. 상이한 시간대에 위치한 팀원 간의 상호작용이 필수적인 글로벌 프로젝트는 이러한 시간적, 공간적 복잡성 때문에 프로젝트의 성공적 수행에 많은 어려움을 겪고 있다. 본 연구는 성공적인 글로벌 프로젝트 수행에 필요한 프로젝트 관리역량에 대한 탐색적인 연구 조사를 하고자 한다. 본 연구는 글로벌 프로젝트 관리 역량을 정보 기술적 역량(IT capability)

Recently ubiquitous sensor network(USN) technique has been applied into various industrial fields such as construction of u-city, civil and architectural engineering, medical areas. The main objective of this paper is to design a u-health system based on USN. Compared to the previous researches, the proposed system in this paper was designed to activate with collected information about health in outdoor environment.

  This research was conducted in order to present the strategies of implementing the logistics information system for effective logistics cost management with the case study of a leading global company. The strategy for effective logistics information sys

We study on the consistency of AHP. It is research that extend of SAW methods by [1]. For tools that measure judgment of inconsistency eigenvector methods, we research consistency that introduced consistency ratio by Saaty. in general, the higher consistence of compare matrix the bigger error within matrix. In this paper, we use the AHP for the optimal decision making. By this method, we have optimal decision making numenical example which three models of any domestic motors companies.

Since 1980's, many enterprises have constructed Strategy Information System and tried BPR, ISP. Also, they implemented ERP and practiced the Process Innovation and Six Sigma for Management Innovation in todays. Although most companies had previous good plans, but those are not satisfied. Because of failed to change management and continued next activity. Many Project for Process innovation are ended as disposal project in my case, if they want next project, they need a new plan which needs additional fund and resource. This paper studied Process Innovation and Six Sigma in many things and proposed new model for continued project on the master plan. Also it proposed next study subject about ERP Optimization and Harmonization after implemented ERP which is considered as next step of PI.

  This study is concerned with image information management system for small scale hospital. We intended to developing image management system which is used of the existing analog devices such as medical camera, supersonic analyser, endoscope etc. We deve

All machines and systems in a firm should be managed for optimizing its productivity. Actually, however, it is hard to manage the machines of a firm in collective methods because the company making each machine varies and the way maintaining each machine is various. As a machine Is out of order, the machine is fixed by the repair person from the company making the machine. Every time comes repair person to fix a machine firm having the machine would experience time loss and cost loss. Therefore, a firm needs to manage blueprint of their machine to reduce loss in time and cost and to maintain their facilities in TPM(Total Productive Management) to make operators manage directly. In this study, we suggest the method to manage a blueprint of a machine with TPM.

Since 1980's, many enterprises have constructed Strategy Information System and tried BPR, ISP. Also, they implemented ERP and practiced the Process Innovation and Six Sigma for Management Innovation in todays, Although most companies had provious good plans, but those are not satisfied. Because of failed to change management and continued next activity. Many Project for Process innovation are ended as disposal project in many case, if they want next project, they need a new plan which needs additional fund and re source. This paper studied Process Innovation and Six Sigma in many things and proposed new model for continued project on the master plan. Also it proposed next study subject about ERP Optimization and Harmonization after implemented ERP which is considered as next step of PI.