이산화탄소 포집 및 저장기술(CCS)은 인류발생적 요인에 의한 이산화탄소 배출 증가와 그로 인한 기후변화를 완화시킬 수 있는 기술 중 하나이다. 그 중, 매체 순환식 연소(chemical looping combustion, CLC)와 칼슘루핑(calcium looping) 기술은 현재 아민 스크러빙(amine scrubbing)을 대체할 수 있는 유망한 기술로 주목받고 있다. 두 방법 모두 금속 산화물을 이용한 연속적인 순환 사이클 반응에 의한 것이다. 전체적인 이산화탄소 포집 및 저장 성능의 향상을 위해서는 사이클을 거듭 하며 발생하는 소결(sintering)로 인한 안정성 저하 문제를 해결하고 금속 산화물의 구조 또한 최적화해야 한다. 금속 산화물 표면에 얇은 박막을 형성하는 것은 소결로 인한 손상을 막을 수 있는 방법이다. 이러한 박막 제조 기술로 잘 알려진 기술에는 화학기상증착법(chemical vapor deposition)과 원자층증착기술(atomic layer deposition)이 있다. 본 총설에서는 CVD, ALD 기술을 비롯하여 효과적인 반응 안정성 향상을 위한 안정제 첨가 방법, 금속 산화물 구조 개선에 대한 다양한 최근 기술들을 다루었다.

There are several manufacturing techniques for developing thermionic cathodes for vacuum ultraviolet(VUV) ionizers. The triple alkaline earth metal emitters(Ca-Sr-Ba) are formulated as efficient and reliable thermo-electron sources with a great many different compositions for the ionizing devices. We prepare two basic suspensions with different compositions: calcium, strontium and barium. After evaluating the electron-emitting performance for europium, gadolinium, and yttrium-based cathodes mixed with these suspensions, we selected the yttrium for its better performance. Next, another transition metal indium and a lanthanide metal neodymium salt is introduced to two base emitters. These final composite metal emitters are coated on the tungsten filament and then activated to the oxide cathodes by an intentionally programmed calcination process under an ultra-high vacuum(~10-6 torr). The performance of electron emission of the cathodes is characterized by their anode currents with respect to the addition of each element, In and Nd, and their concentration of cathodes. Compared to both the base cathodes, the electron emission performance of the cathodes containing indium and neodymium decreases. The anode current of the Nd cathode is more markedly degraded than that with In.

Electrochemical properties and performance of composites performed by incorporating metal oxide or metal hydroxide on carbon materials based on graphene and carbon nanotube (CNT) were analyzed. From the surface analysis by field emission scanning electron microscopy and field emission transmission electron microscopy, it was confirmed that graphene, CNT and metal materials are well dispersed in the ternary composites. In addition, structural and elemental analyses of the composite were conducted. The electrochemical characteristics of the ternary composites were analyzed by cyclic voltammetry, galvanostatic charge-discharge tests, and electrochemical impedance spectroscopy in 6 M KOH, or 1 M Na2SO4 electrolyte solution. The highest specific capacitance was 1622 F g–1 obtained for NiCo-containing graphene with NiCo ratio of 2 to 1 (GNiCo 2:1) and the GNS/single-walled carbon nanotubes/Ni(OH)2 (20 wt%) composite had the maximum specific capacitance of 1149 F g–1. The specific capacitance and rate-capability of the CNT/MnO2/reduced graphene oxide (RGO) composites were improved as compared to the MnO2/RGO composites without CNTs. The MnO2/RGO composite containing 20 wt% CNT with reference to RGO exhibited the best specific capacitance of 208.9 F g–1 at a current density of 0.5 A g–1 and 77.2% capacitance retention at a current density of 10 A g–1.

In this study, composite PAN-based ACNFs embedded with MgO and MnO2 were prepared by the electrospinning method. The resultant pristine ACNFs, ACNF/MgO and ACNF/MnO2 were characterized in terms of their morphological changes, SSA, crystallinity and functional group with FESEM-EDX, the BET method, XRD and FTIR analysis, respectively. Results from this study showed that the SSA of the ACNF/MgO composite (1893 m2 g–1) is significantly higher than that of the pristine ACNFs and ACNF/MnO2 which is 478 and 430 m2 g–1, respectively. FTIR analysis showed peaks of 476 and 547 cm–1, indicating the presence of MgO and MnO2, respectively. The FESEM micrographs analysis showed a smooth but coarser structure in all the ACNFs. Meanwhile, the ACNF/MgO has the smallest fiber diameter (314.38±62.42 nm) compared to other ACNFs. The presence of MgO and MnO2 inside the ACNFs was also confirmed with EDX analysis as well as XRD. The adsorption capacities of each ACNF toward CH4 were tested with the volumetric adsorption method in which the ACNF/MgO exhibited the highest CH4 adsorption up to 2.39 mmol g–1. Meanwhile, all the ACNF samples followed the pseudo-second order kinetic model with a R2 up to 0.9996.

금속 산화물과 혼합한 Pt-Sn/Al2O3 촉매의 프로판 탈수소 반응 성능의 향상 가능성에 대해 서 연구하였다. 금속 산화물로서 Cu-Mn/γ-Al2O3, Ni-Mn/γ-Al2O3, Cu/α-Al2O3를 제조하여 Pt-Sn/Al2O3 촉매와 혼합하고, 프로판 탈수소 반응 성능을 측정하였다. 이 결과들을 불활성 물질인 glass bead를 혼합한 Pt-Sn/Al2O3 촉매를 기준샘플로 삼아 비교하였다. 촉매와 금속산화물을 환원처리 하지 않고 반응 실험한 경우, 576.5℃에서 기준샘플의 전환율 8% 대비, Cu-Mn/γ-Al2O3를 혼합한 Pt-Sn/Al2O3 촉매가 14.9%의 높은 전환율과 96.8%의 선택도를 보였다. 촉매와 금속산화물을 환원 처 리하여 반응활성을 측정한 경우, Cu/α-Al2O3과 Pt-Sn/Al2O3의 혼합촉매가 기준샘플대비 초기에 높은 수율을 보였다. 그러나, 촉매를 환원 처리한 경우 전반적으로 전환율 상승이 크지 않았고, 이것으로 Cu-Mn/γ-Al2O3의 격자산소가 탈수소반응의 전환율 증가 영향을 주었음을 알 수 있었다.

This paper presents a new method for the improvement of color temperature without the change of the driving scheme using transparent dielectric layers with various metal oxides (CeO2, Co3O4, CuO, Fe2O3, MnO2, NiO) in plasma display panels (PDP). In this study, we fabricated ZnO-B2O3-SiO2-Al2O3 glasse with various metal oxides and examined the optical properties of these glasses. As the metal oxides were added to the glasses, the visible transmittances of the dielectric layers decreased and the transmittances in special wavelength regions were reduced at different rates. The change of the transmittance in each wavelength range induced the variation of the visible emission spectra and the change of the color temperature in the PDP. The addition of Co3O4 and CuO slightly decreased the intensity of the blue light, but the intensities of the green and the red light were significantly decreased. Therefore, the color temperature can be improved from 6087K to 7378K and 7057K, respectively.

Synthesis of iron nanopowder by room-temperature electrochemical reduction process of nanopowder was investigated in terms of phase evolution and microstructure. As process variables, reduction time and applied voltage were changed in the range of h and V, respectively. From XRD analyses, it was found that volume of Fe phase increased with increasing reduction time and applied voltage, respectively. The crystallite size of Fe phase in all powder samples was less than 30 nm, implying that particle growth was inhibited by the reaction at room temperature. Based on the distinct equilibrium shape of crystalline particle, phase composition of nanoparticles was identified by TEM observation.

서브마이크론 설계규칙을 갖는 소자의 이층 배선 공정에서 다챔버 장비를 이용한 금속 층간절연막의 공극없는 평탄화를 위하여 PECVD와 O3 ThCVD산화막의 증착시 층덮힘성을 연구하였다. 산화막의 두께가 증가됨에 따라 변화되는 순간단차비의 개념을 도입하여 공극형성의 개시점을 예측할 수 있는 관계식을 모델링하였고, 금속배선간격의 초기 단차비가 다양한 패턴에서 산화막의 두께에 따른 순간 단차비의 변화를 조사하였다. 모델링 검정결과 5˚이하의 re-entrant각을 갖는 TEOS에 의한 PECVO 산화막의 순간단차비가 모델링에 잘 일치하였다. 공극없는 평탄화는 제1층의 PECVD 산화막의 순간 단차비를 0.8이하로 유지하거나 Ar sputter식각을 통하여 산화막의 모서리에 경사를 준후 층덮힘성이 우수한 O3 ThCVD산화막을 증착함으로써 가능하였다. O3 ThCVD산화막의 etchback이 non etchback공정에 비하여 via접쪽저항체인에서 높은 수율을 보였으며, via접촉저항은 0.1~0.3Ω/μm2로 나타났다.

The effect of the metal oxide catalyst in the dimerization of waste vegetable oil was investigated. The high efficiency and recyclability has allowed different metal oxides to be used as catalysts in numerous synthetic reactions. Herein, clay, aluminum, titanium, calcium, magnesium and silicon oxide micro/nanoparticles are used in a Diels-Alder reaction to catalyze the production of the dimer acids. The metal oxides assist the electron transfers during cyclization to produce the desired product. Liquid chromatography mass spectroscopy (LC-MS) and gel permeation chromatography (GPC) were used to verify the production of dimer acids. For the confirmation of cyclization, compounds were analyzed using the nuclear magnetic resonance (NMR) spectroscopy. From the analysis, silylated or pristine clay showed its effectiveness as a catalyst in dimerization. Furthermore, alumina and alumina/silica composite showed successful performance in the reaction to yield cyclic dimer acids. These result suggested that metal oxides and montmorillonite might be used in synthesis of dimer acids for the recycle of waste vegetable oils.