Liquefied hydrogen is attracting attention as an energy source of the future due to its hydrogen storage rate and low risk. However, the disadvantage is that the unit price is high due to technical difficulties in production, transportation, and storage. This study was conducted to improve the design accuracy and development period of needle valves, which are important parts with a wide technical application range among liquefied hydrogen equipment. Since the needle valve must discharge an appropriate flow rate of the liquefied fluid, it is important to determine the needle valve design parameters suitable for the target flow rate. Computational Fluid Dynamics and Artificial Neural Network technology used to determine the design variables of fluid flow were applied to improve the setting and analysis time of the parameter. In addition, procedures and methods for applying the design parameter of needle valves to Convolutional Neural Networks were presented. The procedure and appropriate conditions for selecting parameters and functional conditions of the Convolutional Neural Network were presented, and the accuracy of predicting the flow coefficient according to the design parameter was secured 95%. It is judged that this method can be applied to other structures and machines.

The study used the whole-life carbon assessment method to conduct a thorough carbon-neutral evaluation of a standard steel structure. To further assess carbon emissions, 11 design-changed models were evaluated, with changes made to the span between beams and columns. The results of the carbon emission assessment showed savings of approximately 13.1% by implementing the stage of the beyond life cycle. Additionally, the evaluation of carbon emissions through design changes revealed a difference of up to 42.2%. These findings confirmed that recycling and structural design changes can significantly reduce carbon emissions by up to 48.6%, making it an effective means of achieving carbon neutrality. It is therefore necessary to apply the stage of beyond life cycle and structural change to reduce carbon emissions.

SiC-based composite materials with light weight, high durability, and high-temperature stability have been actively studied for use in aerospace and defense applications. Moreover, environmental barrier coating (EBC) technologies using oxide-based ceramic materials have been studied to prevent chemical deterioration at a high temperature of 1300℃ or higher. In this study, an ytterbium silicate material, which has recently been actively studied as an environmental barrier coating because of its high-temperature chemical stability, is fabricated on a sintered SiC substrate. Yb2O3 and SiO2 are used as the raw starting materials to form ytterbium disilicate (Yb2Si2O7). Suspension plasma spraying is applied as the coating method. The effect of the mixing method on the particle size and distribution, which affect the coating formation behavior, is investigated using a scanning electron microscope (SEM), an energy dispersive spectrometer (EDS), and X-ray diffraction (XRD) analysis. It is found that the originally designed compounds are not effectively formed because of the refinement and vaporization of the raw material particles, i.e., SiO2, and the formation of a porous coating structure. By changing the coating parameters such as the deposition distance, it is found that a denser coating structure can be formed at a closer deposition distance.

This paper is concerned with a test method that can be used to investigate the parameters of the Johnson-Cook constitutive model. These parameters are essential for accurately analyzing material behavior under impact loading conditions in numerical simulation. Ti-6Al-4V alloy (HCP crytal structure) was used as a specimen for the experiments. In the 10−3-103/ s strain rate range, three types of experimental methods (convention, compression and tension) were employed to compare the differences using MTS-810, SHPB and SHTB. Finite element analysis results when applying these parameters were displayed along with the experiment results.

In this study, the cold rolled DP590 FSW joints were obtained by the position control type of the FSW machine and examined. The FSW weldability was investigated using the Si3N4 tool specially made by Cold Isostatic Press (CIP). Defect-free joints were formed at 180-300 mm/min at 800 rpm. However, a groove-like defect was observed along the joint line of the advancing side due to the insufficient material flow. In addition, the life of the Si3N4 tool was compared to that of the polycrystalline cubic boron nitride (PCBN) tool for the durability. The SI3N4 tool that was broken in which tool reached a length of 5 m and around half of the performance level of the PCBN tool.

This study investigated the effects of changes to the pulsation factor of pulsed direct currents on wound healing. Patients with a pressure ulcer at a care hospital for the elderly were randomly divided into three groups: Group 1 involved the application of 100㎲ in pulse duration, 10 ㎳ in pulse period, 100 pps in a pulsation factor, 15 ㎃ in pulse amplitude, and polarity red+ by using pulsed direct currents; Group 2 involved a change of pulse period to 8 ms; and Group 3 received general wound management. Although there were no statistically significant differences in the changing stages of pressure ulcers among the groups, all the groups dropped in numerical stages. In the two groups to which pulsed direct currents were applied, there was a statistically significant reduction in the stages of pressure ulcers from the initial assessment to the 12-week assessment (p<.05). Even though there were no statistically significant differences in changes to the area of pressure ulcers among the groups, a statistically significant decrease was found in pulsed direct current group 2 whose pulse period was shortened (p<.05). There was no difference in the healing rate of pressure ulcers among the groups, but it made a numerical increase in pulsed direct current group 1 and group 2 and a numerical decrease in group 3. There were no significant differences in the characteristics of those who had a full recovery among the groups. Those findings indicate that pulsed direct currents have positive effects on the wound healing of patients with a pressure ulcer and that a treatment with pulsed direct currents whose pulsation factor is raised by reducing the pulse duration is especially effective.

In this study, we analyzed the impact of orographic and thermal forcing on the atmospheric flow field over the urban metropolitan areas on urban artificial buildings and future development plan. Several numerical experiments have been undertaken in order to clarify the impacts of the future development plan on urban area by analyzing practical urban ground conditions, we revealed that there were large differences in the meteorological differences in each case. The prognostic meteorological fields over complex areas of Seoul, Korea are generated by the PSU/NCAR mesoscale model(MM5). we carried out a comparative examination on the meteorological fields of topography and land-use that had building information and future development plan. A higher wind speed at daytimes tends to be forecasted when using new topography and land use data that have a high resolution with an appropriate limitation to the mixing height and the nocturnal boundary layer(NCB). During nighttime periods, since radiation cooling development is stronger after development plan, the decreased wind speed is often generated.

강우로부터 유출현상은 고유적으로 비선형성이다. 더욱이 실제적으로 이와 같은 비선형성의 해석은 많은 어려움을 내포하고 있다. 또한, 부정류효과의 동적작용을 고려한 저류개념은 매개변수의 유역특성상 추정하기가 상당히 복잡하기 때문에 피해오고 있는 실정이다. 본 연구에서는 이와 같은 동적효과를 고려한 비선형의 저류함수에 대한 매개변수의 최적치를 얻고자 시도한다. 이를 위한 수치해법은 금강의 보청천유역의 관측치와 계산치의 오차를 최소로 하는 최소자승법에 의거 준

신호교차로는 도로조건, 교통조건, 신호조건 능 방대한 입력자료를 바탕으로 용량분석을 시행하고 이 과정을 토대로 주요 효과척도인 지체를 산정하여 신호교차로의 서비스 수준을 판단한다. 하지만 이러한 용량 및 서비스 수준 결정에 있어 바탕이 되는 현장 데이터(회전 교통량, 도로의 기하구조, 신호시간, 접근로 구배, 중차량비, 첨두시간계수, 차량도착형태 등) 입력자료의 불확실성으로 인해 초래되는 결과의 오류에 대해서는 고려되지 않고 있는 실정이다. 이로 인해 추정된 용량 및 서비스수준에 대한 신뢰성을 검증할 수 없는 문제를 내포하고 있다. 따라서 본 연구에서는 해당 교차로 접근로의 교통량과 중차량 비율 및 도로의 기하구조 등 입력자료의 불확실성이 용량해석과 서비스수준 결정에 끼치는 영향을 고려해보고 이틀에 의한 영향을 최소화할 수 있는 방안을 제시하고자 한다.

In order to make use of the protection effect against wind by the vegetation, it examined whether it should make what vegetation form and arrangement using the 2-dimensional non-hydrostatic model. When the foliage shielding factor increases, it becomes hard to take in protection effect against wind in a residential section. When it makes height of vegetation high, it becomes hard to take in protection effect against wind with height. In the comparison in the case where vegetation high is gradually made low toward wind-stream from a vegetation, and the case of making it low gradually, although former tends to receive the protection effect against wind by the vegetation, attenuation of wind velicity becomes large. In the comparison in the case where foliage shielding factor and distribution of density of leaf are gathered gradually toward wind-stream from a vegetation. It has been understood to evaluate to height the influence that the vegetation multi-layer model by which the heat revenue and expenditure in the direction of the vegetation height is considered is used, and to characterize the vegetation group by the parameter setting.

본 연구에서는 공간적으로 분포된 강우자료를 바탕으로 한 강우유출관계를 고찰하고, 기존의 공간 평균된 강우유출모형과 비교하여 유역을 공간 평균함으로써 내재되는 불확실성을 분석하여 이를 정량화시킬 수 있는 방법을 모색하였다. 과거 관측된 호우사상을 단순 크리깅 기법을 이용하여 공간적으로 분포된 강우자료를 구축하였다. 공간 분포된 강우와 공간평균강우의 유출을 비교하기 위하여 공간 분포된 강우를 수정 Clark 방법에 의해서 유출계산을 수행한 결과와 지점 강우