Plasma melting technology uses electrical arc phenomena such as lightning to create hightemperature sparks of about 1,600 degrees or more to meet waste disposal requirements through treatment and reduction without distinguishing radioactive waste generated during nuclear power plant operation and dismantling according to physical characteristics. Decommissioning radioactive waste scabbed concrete occurs when polishing and cutting the contaminated structure surface to a certain depth. In this study, Scabbed concrete containing paint was confirmed for volume reduction and disposal safety using plasma treatment technology, and it is planned to be verified through continuous empirical tests.

Air conditioning facilities in nuclear power plants use pre-filters, HEPA filters, activated carbon filters, and bag filters to remove radionuclides and other harmful substances in the atmosphere. Spent filters generate more than 100 drums per year per a nuclear power plant and are stored in temporary radioactive waste storage. Plasma torch melting technology is a method that can dramatically reduce volume by burning and melting combustible, non-flammable, and mixed wastes using plasma jet heat sources of 1,600°C or higher and arc Joule heat using electric energy, which is clean energy. KHNP CRI & KPS are developing and improving waste treatment technology using MW-class plasma torch melting facilities to stably treat and reduce the volume of radioactive waste. This study aims to develop an operation process to reduce the volume of bag filter waste generated from the air conditioning system of nuclear power plants using plasma torch melting technology, and to stably treat and dispose of it. It is expected to secure stability and reduce treatment costs of regularly generated filter waste treatment, and contribute to the export of radioactive waste treatment technology by upgrading plasma torch melting technology in the future.

Removing CO2 gas to address the global climate crisis is one of the most urgent agendas. To improve the CO2 adsorption ability of activated carbon, nitrogen plasma surface treatment was conducted. The effect of nitrogen plasma treatment on the surface chemistry and pore geometry of activated carbon was extensively analyzed. The porosity and surface groups of the activated carbon varied with the plasma treatment time. By plasma treatment for a few minutes, the microporosity and surface functionality could be simultaneously controlled. The changed microporosity and nitrogen groups affected the CO2 adsorption capacity and CO2 adsorption selectivity over N2. This simultaneous surface etching and functionalization effect could be achieved with a short operating time and low energy consumption.

실버 페이스트는 상대적으로 낮은 열처리로 공정이 가능하기 때문에 전자 소자 응용분야에서 유용한 전극 재료이다. 본 연구에서는 은 페이스트 전극에 대기압 플라즈마 제트를 이용하여 전극 표면을 처리 했다. 이 플라즈마 제트는 11.5 kHz 작동 주파수에서 5.5 ~ 6.5 kV의 고전압을 사용하여 아르곤 분 위기에서 생성되었다. 플라즈마 제트는 대기압에서 수행함으로써 인쇄 공정에 더 유용할 수 있다. 플라즈 마 처리시간, 인가된 전압, 가스유량에 따라 전극의 표면은 빠르게 친수성화 되었으며 접촉각의 변화가 관 찰되었다. 또한, 대면적 샘플에서 플라즈마 처리 후 접촉각의 편차가 없었는데, 이는 기판의 크기에 관계없 이 균일한 결과를 얻을 수 있었다는 것을 의미한다. 본 연구의 결과는 대면적 전자소자의 제조 및 향후 응 용 분야에서 적층 구조를 형성하는데 매우 유용할 것으로 기대된다.

The purpose of this study was to compare the efficiency of air and oxygen injected into the underwater non-thermal dielectric barrier discharge plasma (DBD plasma) device used to remove five types of antibiotics (tetracycline, doxycycline, oxytetracycline, clindamycin, and erythromycin) artificially contained in the fish farm discharge water. The voltage given to generate DBD plasma was 27.8 kV, and the measurement intervals were 0, 0.5, 1, 2, 4, 8, 16 and 32 minutes. Tetracycline antibiotics significantly decreased in 4 minutes when air was injected and were reduced in 30 seconds when oxygen was injected. After the introduction of air and oxygen at 32 minutes, 78.1% and 95.8% of tetracycline were removed, 77.1% and 96.3% of doxycycline were removed, and 77.1% and 95.5% of oxytetracycline were removed, respectively. In air and oxygen, 59.6% and 83.0% of clindamycin and 53.3% and 74.3% of erythromycin were removed, respectively. The two antibiotics showed lower removal efficiency than tetracyclines. In conclusion, fish farm discharge water contains five different types of antibiotics that can be reduced using underwater DBD plasma, and oxygen gas injection outperformed air in terms of removal efficiency.

In the present work, a three-phase AC arc plasma torch system is proposed to separate inorganic radioactive materials from the organic liquid waste. For this purpose, first, assuming the resistance of arc plasma ranges between 0.1 and 0.2 ohm, we designed a three-phase AC arc plasma power supply with the power level of 20 kW. Then, a three phase arc plasma torch consisting of three carbon rods with the diameter of 20 mm was designed and mounted on a cylindrical combustion chamber with the inner diameter of 150 mm. Detail design and basic performance of the plasma system were presented and discussed for application to the treatment of radioactive slurry wastes.

KHNP-CRI has developed Mega-Watt Class PTM (Plasma Torch Melter) for the purpose of reducing the volume of radioactive waste and immobilizing or solidifying radioactive materials. About 1 MW PTM is a treatment technology that operates a plasma torch and puts drum-shaped waste into a melter and radioactive waste in the form of slag is discharged into a waste container. Since only the overflowing slag is discharged from the melter, the discharge is intermittent. Therefore, solidification occurs in the process of discharging the melt. It is difficult to accumulate evenly in the waste container, and there is also an empty space. Solid radioactive waste must be disposed of to meet the acceptance criteria for radioactive waste. Plasma-treated solid waste raised concerns about the requirements. The waste solidification output in a slag container gave us some concerns for the waste package’s solidification and encapsulation requirements. The plasma-treated solid waste process to meet the acceptance criteria will be cost and need time consuming. Thus, a induction heating will be introduced to meet solidification requirements and test criteria of the solidification waste for the waste package disposal.

The liquid radioactive waste system of nuclear power plants treats radioactive contaminated wastes generated during the Anticipated Operational Occurrence (AOO) and normal operation using filters, ion exchange resins, centrifuges, etc. When the contaminated waste liquid is transferred to an ion exchanger filled with cation exchange resin and anion exchange resin, nuclides such as Co and Cs are removed and purified. The lifespan and replacement time of the ion exchange resin are determined by performing a performance test on the sample collected from the rear end of the ion exchanger, and waste ion exchange resin is periodically generated in nuclear power plants. In the general industry, most waste resins at the end of their lifespan are incinerated in accordance with related laws, but waste resins generated from nuclear power plants are disposed of by clearance or stored in a HIC (High Integrity Container). Plasma torch melting technology can reduce the volume of waste by using high-temperature heat (about 1,600 degrees) generated from the torch due to an electric arc phenomenon such as lightning, and secure stability suitable for disposal. Plasma torch melting technology will be used to check thermal decomposition, melting, exhaust gas characteristics, and volume reduction at high temperatures, and to ensure disposal safety. Through this research, it is expected that the stable treatment and disposal of waste resins generated from nuclear power plants will be possible.

Currently, KHNP has 24 operating nuclear power plant units with a toal combined capacity of about 23 GWe and two units are under construction. However, permanent stop of Kori unit 1 nuclear power plant was decided in 2017. Accordingly, interest in how to dispose of waste stored inside a permanently stopped nuclear power plant and waste generated as decommissioning process is increasing. KHNP CRI is conducting research on the advancement of plasma torch melting facilities for waste treatment generated during the plant decommissioning and operation period. Plasma torch melting facility is composed of various equipment such as a melting furnace (Melting chamber, Pyrolsis chamber), a torch, an exhaust system facility, a waste supply device, and other equipment. In demonstration test, concrete waste was put in a 200 L drum to check whether it can be pyrolyzed using a plasma torch melting facility. Reproducibility for waste treatment in the form of a 200 L drum and discharge of molten slag could be confirmed, the amount of concrete waste in 200 L Drum that could be treated according to power of plasma torch was confirmed. This demonstration test confirmed the field applicability and stability of plasma torch melting facility, and improved expectations for long-term operation.

In nuclear power plants, insulation is used to protect equipment and block heat. Insulation materials include asbestos, glass fiber, calcium silicate, etc. Various types and materials are used. This study aims to ensure volume reduction and disposal safety by applying plasma torch melting technology to insulation generated at operating and dismantling nuclear power plants. After the evaluation of characteristics by securing thermal insulation materials or similar materials in use at the operational and dismantling nuclear power plant. It is planned to perform pyrolysis and melting tests using the MW plasma torch melting facility owned by KHNP CRI Before the plasma test, check the thermal decomposition and melting characteristics (fluidity, etc.) of the insulation in a 1,600°C high-temperature furnace. The insulation is stored in a 200 L drum and injected into a plasma facility, and the drum and the insulation are to be pyrolyzed and melted by the high temperature inside the plasma torch melting furnace. Through this test, thermal decomposition and melting of the insulation, solidification/ stabilization method, maximum throughput, and exhaust characteristics are confirmed at a high temperature (1,600°C) of the plasma torch. Through this study, it is expected that the stable treatment and disposal of insulation generated from operating and dismantling nuclear power plants will be possible.

높은 안전성과 견고한 기계적 특성을 가진 고체상 슈퍼커패시터는 차세대 에너지 저장 장치로서 세계적 관심을 끌고 있다. 슈퍼커패시터의 전극으로서 경제적인 탄소 기반 전극이 많이 사용되는데 수계 전해질을 도입하는 경우 소수성 표 면을 가진 탄소 기반 전극과의 계면 상호성이 좋지 않아 저항이 증가한다. 이와 관련하여 본 연구에서는 전극 표면에 산소 플라즈마 처리를 하여 친수화된 전극과 수계 전해질 사이의 향상된 계면 성질을 기반으로 더 높은 전기화학적 성능을 얻는 방법을 제시한다. 풍부해진 산소 작용기들로 인한 표면 친수화 효과는 접촉각 측정을 통해 확인하였으며, 전력과 지속시간을 조절함으로써 친수화 정도를 손쉽게 조절할 수 있음을 확인하였다. 수계 전해질로 PVA/H3PO4 고체상 고분자 전해질막을 사 용하였으며 프레싱하여 전극에 도입하였다. 15 W의 낮은 전력으로 5초간 산소 플라즈마 처리를 시행하는 것이 최적 조건이 었으며 슈퍼커패시터의 에너지 밀도가 약 8% 증가하였다.