본 연구는 헬스케어 식물 생산단지의 친환경 설계 및 운영을 위해 우선적으로 고려해야 할 주요영역과 세부요소를 도출하고자 하였다. 헬스케어 식물 생산단지는 환경 친화적 식물 생산시설과 이용자의 정 신 및 신체적 건강 도모 시설을 포함한 복합 엔터테인먼트형이자 지속 가능한 식물 상업시설로 정의된 다. 이를 위해 AHP기법을 활용하여 전문가들을 대상으로 다섯 가지 주요영역(토지, 물, 서식지, 탄소/에 너지/대기환경, 재료/폐기물)과 세부요소에 대한 중요도를 평가하였다. 또한 농장 운영자를 대상으로 친환경 시설의 중요성을 조사하여 시설형과 농장형 유형에 적합한 우선순위를 도출하였다. 연구결과 물 관리가 가장 중요한 요소로 평가되었으며, 토지 관리와 탄소/에너지/대기환경 관리도 높은 중요성을 보였다. 반면 서식지 관리와 재료/폐기물 관리는 상대적으로 낮은 평가를 받았다. 또한 시설형, 농장형, 혼합형으로 유형화된 식물 생산단지 유형별 분석에서는 중요도 평가결과가 다르게 나타났으며, 전문 가와 운영자 간의 평가 차이를 통해 이론과 실무자적 관점의 차이를 확인할 수 있었다. 이러한 연구결과는 헬스케어 식물 생산단지의 맞춤형 친환경 설계 전략수립에 기초자료로 활용될 수 있다.

The intensive development of the petrochemical industry globally reflects the necessity of an efficient approach for oily sludge and wastewater. Hence, for the first time, the current study utilized magnetic waxy diesel sludge (MWOPS) to synthesize activated carbon coated with TiO2 particles for the removal of total petroleum hydrocarbons (TPH) and COD from oily petroleum wastewater (OPW). The photocatalyst was characterized using CHNOS, elemental analysis was performed using X-ray fluorescence spectroscopy (XRF), field emission scanning electron microscope (FESEM), high-resolution transmission electron microscope (HR-TEM), X-ray diffraction analysis (XRD), Fourier transform infrared spectrometer (FTIR), Raman, energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), MAP thermo-gravimetric analysis/ differential thermo-gravimetric (TGA–DTG), Brunauer–Emmett–Teller (BET), diffuse reflectance spectroscopy (DRS), and vibrating sample magnetometer (VSM). The optimization of synthesized highly porous AC/Fe3O4/TiO2 photocatalyst was conducted considering the impacts of pH, temperature, photocatalyst dosage, and UVA6W exposure time. The results demonstrated the high capacity of the MWOPS with inherent magnetic potential and desired carbon content for the removal of 91% and 93% of TPH and COD, respectively. The optimum conditions for the OPW treatment were obtained at pH 6.5, photocatalyst dosage of 250 mg, temperature of 35 °C, and UVA6W exposure time of 67.5 min. Moreover, the isotherm/kinetic modeling illustrated simultaneous physisorption and chemisorption on heterogeneous and multilayer surfaces. Notably, the adsorption efficiency of the AC/Fe3O4/TiO2 decreased by 4% after five adsorption/desorption cycles. Accordingly, the application of a well-designed pioneering photocatalyst from the MWOPS provides a cost-effective approach for industry manufacturers for oily wastewater treatment.

망문백자는 기면 위에 도안화된 그물문을 장식한 것으로 중국과 일본, 한국에서 제작됐 다. 본 연구는 그동안 종합적으로 조망되지 못했던 망문백자의 양식을 규명하고, 동아시아 망문백자의 제작양상과 특징을 고찰했다. 망문백자는 명 말기 수출자기 양식으로 확산됐다. 따라서 명 말기 망문백자가 유통되었던 국가들의 자료를 종합하여 살펴봄으로써 중국 망문백 자 제작 경향을 파악했다. 한편, 중국 망문백자는 주요 소비국이었던 일본에서 모방 및 변용 되었다. 일본은 경질백 자를 생산한 이래로 망문백자를 꾸준히 생산한 것으로 이해된다. 일본에서 망문 그 자체는 길상상징으로 도자기를 비롯한 공예품의 의장으로 애호됐다. 특히 도안집을 통해 널리 유포 되었는데, 이러한 도안집이 조선 19세기 이후 등장하는 망문백자 제작에 자극이 되었을 가 능성을 추정했다. 조선 후기는 백자 제작에 있어서 일본의 영향이 고조되는 시기로 대일교류 를 통한 망문백자 제작을 밝혔다. 이처럼 중국과 일본, 조선에 이르기까지 각국에서 망문백 자 제작과 수용이 각기 다른 양상으로 나타난 점을 통해 동아시아에서 공통으로 출현하는 망 문백자의 상호 영향관계를 탐구했다.

The production process of ultra-pure water (UPW) involves dozens of unit processes such as reverse osmosis (RO), pretreatments, membrane degasifier, and several ion exchange processes. Recently, continuous electrodeionization (CEDI) has replaced the 2-bed and 3-tower (2B3T) ion exchange process. As a result, the majority of wastewater in UPW production now comes from the RO concentrate. The important of RO in UPW production is to produce high-quality water with a low ion concentration (around 1 mg/L) for CEDI feed water. Minimizing RO concentrate is essential to reduce the wastewater produced in the UPW production process. This can be achieved by maximizing the recovery of the RO system. However, increasing the recovery is limited by the water quality of the RO permeate. To ensure high-quality permeate water, the RO system is designed with a two-pass configuration. The recovery of each pass in the RO system is limited (e.g., < 85%) due to the expected increase in permeate water concentration at higher RO feed water concentrations. Interestingly, tests using 4-inch RO modules with low concentration feed water (≤ 35 mg/L as NaCl) revealed that the permeate concentration remains almost constant regardless of the feed water concentration. This implies that the recovery of the first RO pass can be increased as long as the average feed/concentrate concentration of the second RO pass is less than 35 mg/L. According to this design criterion for the RO system, the recovery of the first and second RO pass, with a feed water concentration of 250 mg/L as NaCl, can be increased up to 94.8% and 96.0%, respectively. Compared to the conventional RO system design (e.g., 70% and 80% for the first and second RO pass) for UPW production, this maximum recovery design reduces the volume of RO feed and concentrate by up to 38.4% and 89.2%, respectively.

Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance (electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, design and manufacture of electronic beam filament total inspection equipment for mass production were dealted with.

Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance (electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, design and manufacture of electronic beam filament automation facilities for mass production were dealted with.

Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance (electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, mainly jig & fixture design, production and trial production of electron beam filament were dealted with.

In the era of the 4th industrial revolution driven by the convergence of ICT(information and communication technology) and manufacturing, research on smart factories is being actively conducted. In particular, the manufacturing industry prefers smart factories that autonomously connect and analyze data. For the efficient implementation of smart factories, it is essential to have an integrated production system that vertically integrates separately operated production equipment and heterogeneous S/W systems such as ERP, MES. In addition, it is necessary to double-verify production data by using automatic data collection technology so that the production process can be traced transparently. In this study, we want to show a case of data-centered integration of a large aircraft parts processing factory that requires high precision, takes a long time, and has the characteristics of processing large raw materials. For this, the components of the data-oriented integrated production system were identified and the connection structure between them was explained. And we would like to share the experience gained through the design and implementation case. The integrated production system proposed in this study integrates internal components based on data, which is expected to serve as a basis for SMEs to develop into an advanced stage, and traces materials with RFID technology.

The up-to-date small and medium-sized enterprises (SMEs) in Korea have tried to respond flexibly and rapidly to dynamic business environment and to establish efficient production management system based on information technologies. However, most of SMEs have faced with low applicability of the production management system resulting from high costs of introduction and maintenance. In this paper, a production planning and control system, that is S-PMS (production management system for SMEs), is proposed to solve the problem of low applicability and limited human resources. S-PMS enables production managers to efficiently collect and manage master data with the actual target production systems and explores the bottleneck process by means of simulation techniques to improve productivity. Furthermore, it implements rescheduling mechanism in terms of a variety of process routes. In essence, intuitive dispatching rules and integrated data management of S-PMS improve field applicability of production management system. Consequently, S-PMS is expected to be used as an efficient production management system of SMEs in Korea.

In this study, cation and anion exchange process for performance evaluation was conducted. A pilot plant for the ultrpure water production was installed with the capacity of 25 m3/d. The various production rate and regeneration of ion exchange rate were tested to investigate the design parameters. The test resulst was applied to calculate the operating costs. Changing the flow rate of the ion exchange capacity of the reproduction reviewed the cation exchange process as opposed to the design value is 120 to 164% efficiency , whereas both anion exchange process is 82 to 124% efficiency, respectively. This results can be applied for more large scale plant if the scale up parameters are consdiered. The ion exchange capacity of the application in accordance with the design value characteristic upon application equipment is expected to be needed. In this study, the performance of cation and anion exchange resin process was evaluated with pilot plant(25m3/d). The ion exchange capacity along with space velocity and regeneration volume was evaluated. In results, the operation results was compared with design parameters.

This paper employed the conceptions of “extended self” (Belk, 1988) and expressivism (Taylor, 1989) to demonstrate how local fashion designers in post-colonial Hong Kong express their life experience and cultural identity through their designs. Through conducting long interviews (McCracken, 1988) with five local designers in Hong Kong our findings show that design collections have become an “extended self” for these individuals. The material representation that created by the individual become an inseparable self for the owner. The commercialization of these “extended selves” extends our current conception of self identity in marketing literature.

To ensure that the production system of a factory is efficient, the factory layout design should consider the location and material flow plans of facilities, workshops, and storage areas. Highly productive factories need to have an optimized layout planning process, and a customized design methodology of the production system is a necessity for feasible layout planning. This paper presents a method for designing a layout module's size and shape and provides a heuristic location-allocation algorithm for the modules. The method is implemented and validated using a rich internet application-based platform. The layout design method is based on the leisure ship production process; this method can be used for designing the layout of a new factory or remodeling an existing factory and its production system. In contrast to existing layout methods, the inputs required for the proposed method, such as target products, production processes, and human-resource plans, are simple. This layout design method provides a useful solution for the initial stage of factory design.

Recently a modern style sailing boat suitable for Korean sea was designed through full three dimensional design skill by the authors. In this paper, based on this three dimensional hull and deck design, a production process of 31ft class cruiser sailing boat was developed. First of all, it was possible to make the digital mock-up for design boat. Through this mock-up and RP(rapid prototyping) modeling, an appropriate general arrangement of design boat was able to be determined at final. And also the female deck mould was able to be made by a 5-axis NC cutting machine. By doing this method, more higher efficiency and precision for sailing boat production could be achieved than before. Through this research the total process of design and construction for the designed boat was established.

  Especially, MTO(Make-To-Order) companies take collaborative approaches with their partner companies to make lowprice products and/or technologically low intensive products. The collaborative approach to manufacturing requires collaboration with partner

  제조업에서는 보다 합리적으로 생산량을 결정함으로써 고객에 대한 납기 준수는 물론, 기업 내부의 비용을 감소시키기 위한 노력을 끊임없이 하고 있다. 합리적인 생산량의 결정은 기업 내적으로는 낭비를 제거하고, 생산 흐름의 안정성을 유지하여 주며, 기업 외적으로는 공급사슬 전체의 자재흐름을 원활히 해주고 고객의 기호 변화에 빠르게 대처할 수 있도록 한다. 이에 본 논문은 보다 높은 고객 만족도와 비용의 절감을 위해서 재고 유지비용과 생산준비비용만을 고려하