This study is the adhesion strength of the sprayed metal in accordance with a proportion ratio of the Zn-Al. Results showed the most excellent adhesion strength for metal spraying Al100 For the metal spraying Zn100, ZnAl85, ZnAl95 exhibited a similar level of adhesion strength results.

Many researches are conducted on the concrete pannel to improve the capacity. Up to now, however，the surface glossing of concrete pannel is rarely executed. So it is needed to investigate the surface glossing of concrete pannel. In this paper, the mechanical properties and surface condition of the concrete pannel was compared with water content and aggregate ratio. From the results, when aggregate ratio increase, compressive strength and flexural strength decrease. And, the surface glossing of Non AE concrete pannel was better than that of AE concrete pannel.

This paper deals with the recent development of GFRP bars by material hybridization (i.e., “hybrid GFRP bars”). This development attempts to improve the low elastic modulus of GFRP bars to be used for reinforced concrete (RC) structures, especially they were built in a corrosive environment (e.g., waterfront structures). The purpose of material hybridization in this study is to increase the elastic modulus of GFRP bar. Steel wires were inserted to GFRP and dispersed over the cross-section. E-glass fibers and unsaturated polyester resins were pultruded. Several types of the hybrid GFRP bars were tested to evaluate the tensile strength. Mechanical behaviour of hybrid GFRP bars was examined as a function two factors: 1) a ratio of steel to GFRP; 2) a diameter of steel wire. The experimental results showed that the elastic modulus of the hybrid GFRP bar was improved by up to 171% by material hybridization. To ensure the long-term durability of the hybrid GFRP bars in waterfront structure applications, the individual and combined effects of environmental conditions on the hybrid GFRP bar itself as well as on the interface between bar and concrete should be also accessed.

Since organized living cooperative associations sold their environment-friendly agricultural products directly to independent consumers in the past, the general distribution channels such as wholesalers had difficulty in handling these products. However, the ratio of distribution via wholesale channel has been gradually increased as consumption of environment-friendly agricultural products has expanded. This study is to address vitalization of wholesale distribution for environmentfriendly agricultural products by gathering previous statistical data and analysis. In addition, statistical analysis are conducted by utilizing surveys on forwarders, consumers for environment-friendly agricultural products. As a result, the products producers ship are distributed through dealers at producers sites, producers cooperatives, or food process companies, food companies, internet shopping malls, large-scale distribution companies, consumer groups such as living cooperative associations, direct outlets at consumers sites, or exports. Among the channels, the large-scale distribution companies and franchised special shops account for 47%, the general supermarkets 15.7%, and living cooperative associations 14.6% respectively. By utilizing the research results on producers and consumers, and the distribution weight by channels for environment-friendly agricultural products, the distribution channels for living cooperative associations, wholesale markets, and large scale distribution companies are compared and evaluated. As a result, the level of producers’ and consumers’ satisfaction for them is the lowest since the low selling price for producers and high distribution margins.

황색종잎담배의 추엽 품질등급별 수량 비율과 기상요인과의 관계를 분석한 바 그 결과는 다음과 같다.1. 평균기온의 경우 1,2 등엽 수량비율은 4월 하순 및 7월상순의 특성치와 5%, 5월하순의 특성치와는 1% 수준의 부상관을 나타냈다. 2. 최고기온의 경우 1,2등엽 수량비율은 5월 하순에서부터 7월상순까지의 순별 특성치와 부상관을 나타냈다. 3. 최저기온의 경우는 1,2등엽 수량비율은 4,5하순의 특성치와 1% 수준의 부상관, 5월상순, 6월상순, 7월중순의 특성치와는 1% 수준의 정상관을 나타냈다. 4. 평균기온의 영향도순위는 4,5 등엽 수량비율의 경우 정방향은 7월하순 > 5월상순이고 부방향은 5월하순과 7월상순이였다. 5. 최저기온의 부방향 영향도순위는 4, 5 등엽 수량비율의 경우 5월상순 > 6월상순 > 6월하순이였다. 6. 일조시수는 1, 2등엽 수량비율의 경우 4월중순과 7월중순을 제외한 전생육시기의 순별 특성치와 유의상관을 나타냈다. 7. 일조시수의 정방향 영향도순위는 5월하순 > 4월하순 > 7월하순 > 7월중순이였고 부방향 영향도순위는 6월하순 > 5월상순 > 6월중순 > 5월중순이였다. 8. 강수량은 1, 2등엽 수량비율의 경우 정방향 영향도순위는 6월하순 > 7월중순 > 7월하순이고 부방향 영향도 순위는 4, 5월하순이였다.

잎담배품질(등급별 수량분포비율)에 관여하는 개별 기상환경요인의 영향도 및 관계를 시기별로 분석한 바 그 결과는 다음과 같다. 1. 부엽 고품질인 1∼2등엽의 수량분포비율은 34.6％이고 저품질인 4∼5등엽은 40.4％이었다. 2. 품질등급별 수량분포비율의 년차변이는 5등엽에서 가장 높았고 2등엽에서 낮은 변이를 나타냈다. 3. 기상환경요인중 시기별 년차변이는 강수량과 일조시수에서 높았으며 최고기온에서 가장 낮았다. 4. 강수량은 6월 상순 > 5월 하순 > 6월 하순순으로 년차변이계수가 높았다. 5. 일조시수는 7월 하순 > 6월 하순순으로 년차변이계수가 높았다. 6. 고품질엽의 수량분포비율에 미치는 시기별 기상요인의 영향도를 보면, 가) 평균기온 : 정방향으로는 5월 하순과 중순에서 영향도가 크고 부방향으로는 5월 하순과 6월 상순에 크게 나타났다. 나) 일조시수 : 정방향으로는 6월 중순 > 6월 하순 > 5월 하순순으로 영향도가 크고 부방향으 영향도순은 5월 상순> 5월 중순이었다. 다) 강수량 : 정방향의 영향도순위는 5월 상순 > 5월 하순 > 5월 중순이고 부방향은 6월 중순과 6월 상순에서 영향도가 크게 나타았다.