Decommissioning plan of nuclear facilities require the radiological characterizations and the establishment of a decommissioning process that can ensure the safety and efficiency of the decommissioning workers. By utilizing the rapidly developed ICT technology, we have developed a technology that can acquire, analyze, and deliver information from the decommissioning work area to ensure the safety of decommissioning workers, optimize the decommissioning process, and actively respond to various decommissioning situations. The established a surveillance system that monitors nuclide inventory and radiation dose distribution at dismantling work area in real time and wireless transmits data for evaluation. Developed an evaluation program based on an evaluation model for optimizing the dismantling process by linking real-time measurement information. We developed a technology that can detect the location of dismantling workers in real time using stereovision cameras and artificial intelligence technology. The developed technology can be used for safety evaluation of dismantling workers and process optimization evaluation by linking the radionuclides inventory and dose distribution in dismantling work space of decommissioning nuclear power plant in the future.

Glass fiber (GF) insulation is a non-combustible material, light, easy to transport/store, and has excellent thermal insulation performance, so it has been widely used in the piping of nuclear power plants. However, if the GF insulation is exposed to a high-temperature environment for a long period of time, there is a possibility that it may be crushed even with a small impact due to deterioration phenomenon and take the form of small particles. In fact, GF dust was generated in some of the insulation waste generated during the maintenance process. In the previous study, the disposal safety assessment of GF waste was performed under the abnormal condition of the disposal facility to calculate the radiation exposure dose of the public residing/ residents nearby facilities, and then the disposal safety of GF waste was verified by confirming that the exposure dose was less than the limit. However, the revised guidelines for safety assessment require the addition of exposure dose assessment of workers. Therefore, in this study, accident scenarios at disposal facilities were derived and the exposure dose to the workers during the accident was evaluated. The evaluation was carried out in the following order: (1) selection of accident scenario, (2) calculation of exposure dose, (3) comparison of evaluation results with dose limits, and confirmation of satisfaction. The representative accident scenarios with the highest risk among the facility accident were selected as; (a) the fire in the treatment facility, (b) the fire in the storage facility, and (c) fire after a collision of transport vehicles. The internal and external exposure doses of the worker by radioactive plume were calculated at 10m away from the accident point. In evaluation, the dose conversion factors ICRP-72 and FGR12 were used. As a result of the calculation, the exposure dose to workers was derived as about 0.08 mSv, 0.20 mSv, and 0.10 mSv, due to fire accidents (vehicle collision, storage facilities, treatment facilities). These were 0.2%, 0.4%, and 0.2% of the limit, and the radiation risk to workers was evaluated to be very low. The results of this study will be used as basic data to prove the safety of the disposal of GF waste. The sensitivity analysis will be performed by changing the radiation source and emission rate in the future.

Korea’s elevator industry is one of the world’s eighth-largest industrial sectors and the third largest in the world by new installations. This year, the number of elevators has exceeded 700,000, and the number of new installations is 30,000-40,000 every year. However, the news of elevator-related accidents is reported continuously through the media and the accident rate is not decreasing. In particular, among the recent accidents related to elevators, accidents related to elevator workers are increasing, causing social problems. This year, the National Assembly’s Environmental Labor Relations Commission’s National Auditors lost five lives a year and 12 elevator workers were killed in fall and stenosis accidents during the installation, maintenance and replacement of the elevators for about two years since 2018. It took place to adopt the representatives of four domestic elevator companies as witnesses. An elevator worker is a collective term for workers involved in the design, manufacturing, installation, replacement, maintenance, inspection, management, and supervision related to the elevator industry, and the related accidents are called elevator worker accidents. Analysis of elevator-related accidents in the past has shown that the fault of the user accounted for 70% of the total, and the fault of the worker accounted for about 2.5%, and the accident occurred to the user or the user due to carelessness of the worker during the lift-related work. Currently, elevator-related accidents are reported by the Korea Elevator Safety Agency under Article 48 of the Elevator Safety Management Act under the Ministry of Interior and Safety. If deemed necessary for the prevention and prevention of recurrence of an elevator accident, the cause and condition of the elevator accident may be investigated. However, the current draft law is limited only to elevators after installation inspection, and is separated from the Ministry of Employment and Labor’s data on accidents occurring in the manufacturing and installation stages related to the elevator industry. This study analyzes the recent safety accidents of elevator workers and prepares safety measures to prevent them through the risk analysis, and also draws out the problems and improvements of the current elevator worker accident investigation to find the elevator worker accident rate that is on the increase trend.

선박이나 컨테이너로 수출입되는 곡류 및 박류는 검역용 훈증제인 메틸브로마이드(이하 MB)와 인화수소(이하 PH3)를 사용하는데, 처리 온도/수용비/선적방식에 따라 충분한 배기시간을 필요로 한다. 현장에서 배기시간 미설정으로 검역관 및 방제기술자에게 훈증제 TLV(Threshold Limit Value)-TWA(Time Weighted Average) 기준 이상의 농도에 노출될 위험이 있으므로, 소독 전, 후 작업자 안전을 고려하여 각 훈증제 별 작업자 안전기준에 적합한 배기시간이 설정되어야 한다. 따라서, 실내 훈증상에서 곡류(쌀, 대두) 및 박류(대두박, 주정박)를 대상으로 현행 소독처리기준으로 소독 후 탈착되는 가스농도를 측정해 MB 1 ppm, PH3 0.3 ppm 수준 이하로 감소되는 배기시간을 조사하였다. 조사결과 TLV-TWA 기준이하의 수준으로 감소되는데 필요한 배기시간은 주정박/대두박/대두에 MB가 처리된 경우는 모두 30시간, 쌀에 PH3가 처리된 경우는 30분이 소요되는 것을 확인하였다.

While Korea had achieved radical growth of construction industry, it also had accumulated problems in material, human and economical loss due to its low quality of safety level. Therefore, not only enterprises but also the nation is putting in a great deal of efforts for construction safety. However, its effect is not satisfiable. This research aims for change of construction cite by introduction of professional Safety Patrol Management System(SPMS) and consideration of its necessity. To consideration of its necessity, we compared and anaylzed average numbers of indicated dangers and safety accident incidences in each construction cites and we researched changes in worker's safety sense. It will establish the suitable design standards and suggest the basic database for estimating disaster and accident ratio.

The occupational injury and illness(OII) was influenced by the various factors. This study was planned to investigate the pathway of the activities of OSHM on the rate of OII via worker's participation. The survey on the trend of the activities of OSHM was used. The sample size of manufacturing industry was 3,000 enterprises and that of construction was 1,000 enterprises. The survey was done by interview method with structure questionnaire. Questions about the activities of OHSM were integrated into one category using factor analysis. The enterprises with OII has more activities of OSHM than that without OII. Among enterprises with OII, the level of the activities of OSHM was positively correlated with the rate of OII. The activities of OSHM has influenced on the rate of OII directly and indirectly via worker's participation and the activities of prevention of accident. Worker's participation also has the direct effect and indirect effect on the rate of OII. Worker's participation in construction sector has more effect on OII than that in manufacturing sector.

According to Department of labor guideline “2012-104 (2012.9.26.)” This study is to suggest the basic information and the improvement for the application of risk assessment on a construction site by group interview & survey of construction worker who is the practice of the subject and then numerical analysis about awareness and action plan of Safety and health. The result of group interview and survey of construction worker, most of construction worker feel the danger during the work. Then construction worker analysis results that risk assessment helps to change & raise awareness of safety and reduce an industrial disaster. Easy Safety management activity such as TBM & safety education active will be necessary for safe worksite and then I suggest the TBT(tool box talk) active which combines TBM & safety education.

In terms of deregulation requests from business, incidents at construction sites are rapidly increasing after reducing the regular safety training hours. Especially, to prevent incidents through safety trainings for construction site workers, who have lots of hazardous tasks than general manufacturing, is not only to protect property of both the companies and the country but also to increase their profits. That is why there are loud voices regarding that the safety training is a core mandatory to prevent industrial incidents. But, most companies, as soon as the deregulation for safety training is implemented, mitigated conducting safety trainings to prevent incidents. With this, the incidents are currently to be increased and caught in a vicious circle of many incidents at the smaller companies because of their absentmindedness regarding safety training due to their poorness as subcontractors of major companies, comparing to major companies. This study explains that the difference between managers and workers are existing about safety awareness and knowledge. And, we confirmed that the educational factor led by deficiency of safety awareness and knowledge was the major factor.

The government separated and established the industrial safety and health law from the Labor Standard law since 1981 to promote the labor's working environment and to improve the conditions of laborers. The government made a lot of effort to discharge the industrial safety and health law by continuous revision of the law thereafter. it is, however, difficult to establish clear-cut lines of authority and responsibility due to the fact that the substantial application of the industrial safety and health law is adapted by enterprise's autonomous management. There are frequent industrial disasters on the small and medium enterprises which have financial difficulty and it means this causes much more social cost. Finally, for the improvement of laborer's safety, health and working environment in the small and medium enterprises we need to raise the effectiveness of the industrial safety and health law through enhancing a government-office's administration and surveillance with the changing mind of a business proprietor. On this paper, we research on the actual condition of the administration, inspection and regulation of safety and health by means of the industrial safety and health law. Thereafter we analyze how much the Korea Occupational Safety & Health Agency and vicarious businesses of safety & health management help. we used the survey method to gather data from 380 laborers directly and analysed the data by SPSS v17.0.

This paper proposes a maintenance method to integrate worker's safety concerns into the process activities of the manufacturing system and it is to be considered as a part of the scope of maintenance engineering. The proposed method incorporates worker's health and safety considerations into maintenance engineering in each of the manufacturing process using reliability analysis. It can help to make a better planning and implementation of maintenance activities for the manufacturing system.

A studies wish to present safety assessment table that is consisted of safety check-up, safety education, safety management for worker's safety management assessment about unit process. And safety management level was survey through case study that use safety assessment table. Safety management assessment table is improved safety management level of unit process, and is developed safety management system by worker confirms assessment items and improves problem.