이 글은 남한 동해안에 유입된 북한 생활쓰레기로부터 시작된다. 그동안 북한 쓰레기가 남한에 유입된다는 사실은 해양쓰레기 실태조사 관련 연구 에서 주로 이루어졌다. 환동해권 해양쓰레기 유입 등에 관한 연구에서도 주로 한국과 일본, 극동러시아 등의 유입 현황에 관한 연구는 있지만, 북 한은 논의의 대상에서 제외되었다. 본 연구는 기존의 해양학 관점이 아닌 북한학 관점에서 남한 해안에 유입된 북한 쓰레기 문제를 다루었다. 북한 생활쓰레기 중 상품포장지는 직접적으로 북한 상품 생산 현황과 브랜드 등을 알 수 있으며, 간접적으로는 북한 내 경제 상황과 상품 유통 지역망 등을 알 수 있기 때문이다. 동해안 지역에서 수거한 북한제품 포장지를 살 펴보면 대부분 생산공장은 평양으로 표기되었다. 이를 통해 평양에서 생산 한 제품이 동해안 지역으로 유통됨을 알 수 있다. 또한 동해안 지역은 북 한을 대표하는 대도시인 원산, 청진, 함흥, 라선 등이 있는데, 실제로 상품 포장지에는 이 지역 생산공장이 표기되는 사례도 있었다. 김정은 집권 이 후 매년 국가적 차원에서 국가디자인전시회를 개최할 만큼 산업미술을 강 조하는데, 특히 상품의 고유한 특징을 표현하는 상표도안을 강조한다. 본 연구에서는 동해안 주요 도시에서 생산한 제품을 중심으로 같은 품목이지 만 공장별로 어떻게 상표도안이 다른지 살펴봤다. 북한 쓰레기에 대한 북 한학적 시각과 해양학적 시각의 학제간 연구를 통해 남한에 유입되는 북 한 생활쓰레기에 대한 연구의 폭을 넓혀갈 필요가 있다.

The Singil Stream, flowing into an artificial lake, Lake Shihwa (South Korea), experiences a strong anthropogenic pressure with continuous organic matter (OM) inputs from rural, urban, and industrial areas. In this study, we investigated suspended particulate matter (SPM) and streambed sediments collected along the Singil Stream in 2014 and 2016, by applying a dual element approach (δ13C and δ15N) to identify OM sources. The SPM and streambed sediment samples from the indusrial area showed higher organic carbon and nitrogen concentrations (or contents) than those from the other areas, with distinctively lower δ15N values. Accordingly, our dual element approach indicates that the industrial area was the predominant OM source influencing OM quality and thus water quality of the Singil Stream flowing into Lake Shihwa during the study periods. However, further studies are necessary to better constrain OM sources in the Singil Stream since OM sources from the industrial area appear to be complex.

서울시 한강으로 유입되는 하천의 어류군집 특성 분석을 위해 2016년 5월부터 2017년 4월까지 조사하였다. 자연형으로 복원된 하천은 우이천, 당현천, 청계천, 양재천, 목감천, 도림천, 홍제천 등이다. 조사 기간 동안 21개 지점에서 족대와 투망으로 채집된 어류는 총 10과 41종이었다. 한반도 고유종에 속하는 어종은 줄납자루(Acheilognathus yamatsutae), 가시납지리(Acheilognathus gracilis), 중고기(Scrcocheilichthys nigripinnis morii), 몰개(Squalidus japonicus coreanus), 참갈겨니(Zacco koreanus), 꺽지(Coreoperca herzi), 얼룩동사리(Odontobutis interruta) 등 7종 이었으며 고유화빈도가 17.1%이었다. 국외에서 도입된 외래종은 비단잉어(Cyprinus carpio, Fancy type), 금붕어 (Carassius auratus, Gold fishh), 떡붕어(Carassius cuvieri), 블루길(Lepomis macrochirus), 배스(Micropterus salmoides) 등 5종(12.2%)이었다. 각 조사 지점별 우점종은 피라미(Zacco platypus), 붕어(Carassius auratus), 납자루 (Acheilognathus lanceolatus), 가시납지리(Acheilognathus gracilis), 대륙송사리(Oryzias sinensis) 등이었다. 종다양도 지수, 균등도지수 및 종풍부도 지수에서 양제천이 다른 조사 하천에 비해 지수가 높아 안정적인 군집 상태를 나타내었 다. 수질에 대한 내성도 guild에서 민감종이 3종(7.3%), 중간종 16종(39.0%), 내성종 22종(53.7%)이었다. 식성에서 충식성은 12종(29.3%), 잡식성 23종(56.1%), 육식성 6종(14.6%)으로 잡식성이 매우 풍부하였다.

In this study, the fauna of freshwater fish were investigated from March until October of 2016 in 24 independent streams in the Jeonnam and Jeonbuk provinces, which were flowing into the Yellow Sea. The health of the aquatic ecosystem in those streams was assessed through the biological and abiological character index (BAc index). During the surveyed period, a total of 4,127 individuals were collected; they belonged to 59 species of 44 genera in 18 families. The most dominant species identified was Zacco platypus, and 12 species were endemic species of Korea, including Rhodeus uyekii. The BAc index indicated a statistically significant correlation (p<0.01 or 0.05). The stage distribution of the aquatic ecosystem health assessment showed the highest rating of 41.7% at the “Fair” stage. The “Good” and “Poor” stages accounted for 20.8% while the “Excellent” stage took up 16.7%. It has been confirmed that the aquatic ecosystem health of independent streams is influenced more by the abiological character index as a consequence of geographical characteristics and artificial/natural limiting factors, than by the biological character index.

In this paper, we analyzed the characteristics of the mass flow rate and velocity of the refrigerant in response to a change in the number of holes and the diameter size(Type-1～4) of the valve guide refrigerant to flow from Pc to Ps when the pressure is constant. Type-1 is 40% higher mass flow flowing in the direction of Ps as compared with the Pc mass flow rate. Type-2 is 64% higher mass flow flowing in the direction of Ps as compared with the Pc mass flow rate. Type-3 is 50% higher mass flow flowing in the direction of Ps as compared with the Pc mass flow rate. Type-4 is 47% higher mass flow flowing in the direction of Ps as compared with the Pc mass flow rate.

The power of semiconductor, Korea is continuously constructing semiconductor production line for keeping a front-runner status. however, studies and data about potential risks in semiconductor factory are still short. If fire does not initially suppressed, the fire causes a great damage. To decrease fire risk factors, in addition to fire fighting safety equipment, more important thing is how to design and construct fire protection system. The current fire protection codes about semiconductor factory come under functional law, and this law is short of consideration about particularity of factory. The existing prescriptive fire codes depending on experience compose without evident engineering verifications, thus equipments which is created by the current prescriptive fire code may bring about a variety of problems. For example, the design under the current regulation can not cope with the excessive investments, low efficiencies, and the diversifying construction designs and be applied to the quick changes of new technologies. Ergo, an optimal design for fire protection is to equip fire protection arrangements with condition and environment of production field. Manufacturing factory of semiconductors is a windowless airtight space. And for cleanliness, there exists strong flow of cooperation. Therefore, there is a need for fire safety design that meets the characteristic of a clean room. Accordingly, we are to derive smoke flow according to cooperation process within a clean room and construction plan of an optimal sensor system. In this study, in order to confirm the performance of proposed smoke-exhaust equipment and suggest efficient smoke exhaust device when there is a fire of 1MW of methane in the clean room of company H, we have implemented fire simulation using fluid dynamics computation.

본 논문에서는 펌프 노즐이 부착된 잠수 선형의 유동에 관해 수치해석 결과를 보여준다. 이는 속도분포, 양력계수, 영각의 값을 갖는 펌프젯 노즐이 선체와 부착되었을 때와 부착되지 않았을 때의 종강도 모멘트 등의 값들을 계산한다. 선형의 속도 분포에 따른 노즐의 영향면적과 양력계수(변호의 특성요인) 종강도 모멘트, 영각에 따른 도함수 등을 보여준다.

In order to study the change of pollution loads flowing into Mokpo harbour after the operation of Mokpo Municipal Sewage Treatment Plant (MMSTP) and to evaluate the contribution of MMSTP operation to the improvement of marine water quality of Mokpo harbour, the pollution loads flowing into Mokpo harbour from land in dry weather were surveyed and estimated on the bases of the seasonal flow rates and the seasonal water qualities of streams and effluents located around Mokpo harbour from summer, 1997 to spring, 1998 before the operation of MMSTP, and the pollution loads of the inflow and the effluent of MMSTP were also surveyed and estimated from winter, 1998 to spring, 1999 after the operation of MMSTP. The treatment rates of MMSTP were shown to be about 49% in COD, 76% in TSS, 79% in VSS, 3% in T-N, 7% in DIP, 29% in T-P and -32% in DIN. The change rates of pollution loads flowing into the inner harbour of Mokpo due to the operation of MMSTP were shown to be about 56% In COD, 78% in TSS, 84% in VSS, 45% in DIN, 22% in T-N, 34% in T-P and -14% in DIP. The contribution rates of MMSTP operation to the reduction of total pollution loads flowing into the entire Mokpo harbour were found to be about 3% in COD, 3% in 755,5% in VSS,1% in DIP, 3% in T-P and -1% in DIN.

This study evaluated the contamination levels of inland pollution sources flowing into Taeanhaean National Park. The nutritional status of influents was assessed by analyzing water quality and trophic status index (TRIX) at 52 stations, and the contamination levels of sediments were evaluated by analyzing eutrophication cleanup index (CIET) and heavy metals at 36 stations. The results of the TRIX analysis showed that 26 of the 52 stations had influents with a TRIX value of 6-10 (poor water quality/very high trophic level), indicating atrocious water quality and high eutrophication levels. The results of the CIET analysis showed that 4 out of the 36 stations were highly contaminated with organic matter. Analysis of heavy metals showed that the copper (Cu) and zinc (Zn) levels exceeded the threshold effects level (TEL) and probable effects levels (PEL) at several stations. In addition, the arsenic (As) level exceeded the threshold effects level at one station, and the levels of the other heavy metals (Cd, Cr6+, Ni, Pb, and Hg) were lower. Most inland pollution sources have been identified as small-scale, but long-term and continuous exposure can negatively affect the marine ecosystem; therefore, it necessary to prepare inland pollution source management standards and measures suitable for the characteristics of the coastal area.

As a result of this study, the testor penetration resistance and the hardness of the durometer are considered highly correlated and are thought to be effective when using the durometer to determine the setting time in the field structure.

PET(positron emission tomography)을 촬영하기 위해서는 방사선 의약품 동위원소를 사용하여 인체 내에 정맥주사를 한다. 이 경우 대표적으로 사용하는 방사선 의약품은 18FDG (Fluorodeoxyglucose)이다. 의료용 싸이크로트론으 생산하는 18F에 deoxyglucose를 합성하기 위해서 합성용 카세트장치가 필요하다. 방사성 의약품 제조시에는 많은양의 2차 방사선이 발생이 된다. 따라서 2차 방사선을 차폐하기 위하여 핫셀(Hot cell)을 사용한다. 우리는 18FDG 합성 또는 분배시에 핫 셀 외부로 유출되는 선량을 측정하였다. 이번 실험은 18FDG 제조 작업시에 의도하지 않게 발생할 수 있는 방사선 작업종사자의 피폭에 관한 선량정보를 제공하기 위함이다. 결론적으로 핫셀 내부에서 외부로18FDG 합성시에 선량이 유출됨을 확인 할 수 있었다. 특히 핫셀에서 핫셀 내부를 볼 수 있는 납유리에서 외부로 방사선이 유출되는 것을 알 수 있었다. 결론적으로 18FDG 합성시 방사선 작업종사자의 피폭선량을 감소하기 위해서는 핫셀 존재하는 납유리의 개선점이 필요할 것으로 사료된다.

교량의 장대화로 고품질과 양호한 시공성을 갖는 고유동성 매스콘크리트가 프리스트레스 콘크리트 거더에 광범위하게 사용되고 있으나, 수화열과 자기수축에 의한 비구조균열을 종종 발생하고 있다. 대상부재의 콘크리트응력에 대한 다양한 실험과 수치해석을 통하여 평가로부터 메스콘크리트의 수화열 증가에 따라 인장응력 및 균열지수를 예측하였다. 또한 분체계 혼화재료에 의한 자기수축 증가는 정착부 부근 매스콘크리트의 인장응력을 가중시킨다. 수화열과 자기수축 및 건조수축에 의한 인장응력은 PSC 거더의 대부분에서 약간의 응력증가를 나타내나, 정착부 근처의 인장응력은 콘크리트의 재령초기에 인장강도를 초과하게 되어 균열을 유발하게 됨을 알 수 있었다.

고유동 콘크리트는 일반 콘크리트에 비해 고가의 각종 혼화재료를 과량 혹은 추가로 사용하여야 하기 때문에 재료비 단가 상승, 추가 설비의 필요 등의 문제점이 있고, 재료분리를 방지하기 위해 분체량을 증가시킴으로써 과잉 강도발현 등 고유동 콘크리트가 갖고 있는 많은 장점이 있음에도 특수 목적이외에는 그 사용에 있어 제약이 있었다. 이에 본 연구에서는 기존에 개발된 고강도성 고유동 콘크리트와 달리 일반 강도의 고유동 콘크리트의 상용화를 위해 콘크리트 구성 재료 중에서 골재를 중심으로 이들의 합리적 활용과 콘크리트의 성능향상 모색을 위해 정량적 인자별 실험을 수행하였다. 사용한 실험변수로 물-시멘트비, 잔골재율, 골재의 조립률, 입자 크기의 중요도, 13mm 골재와 미립분의 활용에 대해 검토하였으며, 슬럼프플로와 U형 충전시험의 충전고차로 평가하였다. 연구결과, 고유동 콘크리트 성상은 굵은 골재보다 잔골재 입도에 대한 의존도가 높으며, 잔골재율이 높을수록, 조립률이 낮을수록 충전성과 유동성 확보에 유리하였다. 또한, 골재의 대체재로써 13mm 골재 및 미립의 석분을 활용함으로써 보다 효율적으로 충전성과 유동성을 향상시킬 수 있음이 본 연구를 통해 확인되었다.

This study is that larger scale and longer span of construction in concrete structures urge increasing use of mass concrete, high-flowing concrete among them is more widely used for improvement of quality and concrete constructability, but it may cause occurrence of cracks due to autogeneous shrinkage as well as heat of hydration. In this regard, the present study provides comparative analysis on temperature characteristics subject to varied locations through experiments adopting a PSC girder in which high-flowing concrete is used; moreover, it analyzes heat of hydration through the FEM to perform the crack analysis of the PSC girder in such a way that the result thereof is compared with that of the experiment.

In order to improve the water environment at urban streams in Korea, several river restoration projects have been initiated for past few years. This study evaluates the impact of diverting water application at the riverhead of Onchun stream through the monitoring program for several water quality and ecological parameters. Various water quality parameters and ecological item such as benthic macroinverterates has been investigated between 09/05 and 12/06. Analysis indicates that the application of diverting water from Nakdong river to Onchun stream distinctly improved several water quality parameters such as, PH, BOD, TN, TP and concentrations of heavy metals. Low flow augmentation also improve ecological indicies such as the diversity index of benthic macroinvertebrates. Generally speaking, releasing addition water from head water of Onchun stream improves various water environmental characteristics.

In order to manage the water quality from the flowing streams in Cheju Island, the characteristics of water quality was investigated from August, 1996 to May, 1997 and the pollutant loadings for future were estimated from the watershed at each stream. Comparing the mean concentrations of each water quality with the criterion of water quality in river, it was under I class except for Changgo Stream, for DO, under I class at the whole station for SS and under Ⅱ class for BOD. As the pollutant loadings at each stream in 2020 is compared with those in 1996, the estimated results are as follows : 1) for BOD, 59% at Donghong Stream, 24% at Yeonoe Stream, 44% at Ohngpo Stream and 57% at Changgo Stream. 2) for T-N, 91% at Donghong Stream, 76% at Yeonoe Stream, 63% at Ohngpo Stream and 89% at Changgo Stream. 3) for T-P, 69% at Donghong Stream, 42% at Yeonoe Stream, 45% at Ohngpo Stream and 73% at Changgo Stream The point source loadings discharged through combined sewer could be treated at sewage treatment plant. However, the expected slow decreasing rate of BOD, T-N, and T-P loadings is due to the part of untreated nonpoint source loadings. Nonpoint source loading overflow typically occurs when the flow of stormwater combined with sewage exceeds the capacity of the interceptor sewers. Since most of the sewers used in Cheju Island are the combined sewers, the combined overflow sewage is bypassed into the receiving water area after a rainstorm. Therefore, a means to control nonpoint source loadings should be considered for the river and marine water quality management.