PURPOSES : The wedge-type anchorage system requires a complex analysis of not only the tensile stress of the CFRP plate, but also the compressive stress and shear stress generated by the wedge action. The purpose of this study is to find a composite material failure theory that is suitable for analyzing the behavior of wedge-type anchorage system among various failure theories. METHODS : In this study, numerical analysis of various composite material failure theories was performed to analyze the anchorage strength and failure mode of the wedge-type anchorage system according to each failure theory, and compared with actual test results to determine the composite material failure theory most suitable for analyzing the behavior of a wedge-type anchorage system. RESULTS : Since the Maximum Stress failure theory shows similar results to the actual test in terms of failure mode and anchorage strength, there is no significant problem in applying it to the wedge-type anchorage system. However, it is judged to be difficult to apply under property conditions where interactions between stresses are highlighted. The Tsai-Hill and Tsai-Wu failure theories are considered unsuitable for application to wedge-type anchorage systems because the wedge angle conditions at which the most advantageous anchorage strength occurs are significantly different from other theories and the fracture type cannot be predicted. The Hashin-Rotem failure theory is considered to be the most appropriate to apply as a failure theory for the wedge-shaped anchorage system because the anchorage strength was slightly lower than the actual test results, but there was no significant difference, and the failure mode was consistent with the test results. The Hashin failure theory is judged to be unsuitable for application as a failure theory for the wedge-type anchorage system because the anchorage strength and failure mode were interpreted differently from the actual test results. CONCLUSIONS : The Hashin-Rotem failure theory was presented as the composite material failure theory most suitable for analyzing the behavior of wedge-type anchorage system.

기술의 발전에 따라 전 세계적으로 교량은 대형화되고 있으며, 또한 노후 교량의 수도 급격히 증가하고 있다. 이들 대형, 노후 교량 에 대한 구조건전성 모니터링은 대형 사고 예방을 위해 필수적이다. 본 연구에서는 LoRa LPWAN 기반 무선계측시스템의 적용에 대 한 연구를 수행하였으며, 전남 신안군에 위치한 천사대교의 사장교 구간에 LoRa 무선계측시스템을 구축하였다. 교량의 주탑, 케이블, 보강거더에 대하여 계측시스템을 구축하여 기구축되어 운영 중인 유선기반 모니터링 시스템과 성능 및 경제성을 비교하여 LoRa LPWAN 기반 무선 모니터링 시스템의 대형 교량에서의 적용성을 검토하였다.

교량은 사용년한이 증가함에 따라 노후화로 인해 역학적인 성질과 구조적인 성능이 저하되고, 이로 인해서 강진 시에 내진성능이 저하된다. 교각과 교량받침에 대한 노후화를 몇 가지 단계로 정량화하여 해석모델에 반영하였고, 노후화된 교각과 교량받침에 대하 여 부재-수준의 지진취약도를 평가하였다. 교량 시스템의 파괴 메카니즘을 직렬시스템으로 가정하여, 부재-수준의 지진취약도 해석 결과로부터 시스템-수준의 지진취약도를 평가하는 방법을 제안하였다. 노후도에 취약한 부재인 교각과 교량받침에 대하여 5가지 정 량적인 노후도(0, 5, 10, 25, 40%)를 가정하여 부재-수준의 지진취약도를 평가하였고, 이 결과로부터 시스템-수준의 지진취약도 평가 를 수행하였다. 시스템-수준의 지진취약도는 교량받침 보다는 교각이 지배적인 영향을 줌을 알 수 있었다. 이는 보다 취약한 구조부재 의 지진취약도가 전체 교량시스템의 지진취약도에 지배적인 영향을 주는 것을 의미한다.

본 연구에서는 차량-교량 상호작용 시스템의 고유진동수 변화를 분석하였다. 차량이 주행하는 교량의 동특성은 차량의 질량 및 진 동을 무시하지 않는 경우 상호작용을 반영해야 하는데, 이때 시스템은 시간가변적이므로 고유진동수 또한 시간가변적인 특성을 보인 다. 따라서 본 연구에서는 차량과 교량을 각각 2자유도를 갖는 시스템으로 모델링하여 차량의 위치와 질량비 그리고 시스템 강성비에 따른 시간가변적 고유진동수를 산출하였다. 분석 결과 일반적으로 초기 고유진동수가 작은 시스템은 상호작용으로 인하여 증폭비가 낮아지는 추세를 보이나 상호작용이 발생할 경우 증폭비는 분기점을 보이며 비선형적 추세를 보이는것을 알 수 있다. 따라서 상호작 용이 발생하는 시스템차수에 대한 이해가 필요함을 알 수 있다.

PURPOSES : In this study, a method for evaluating concrete bridge deck deterioration using three-dimensional (3D) ground penetrating radar (GPR) survey data and its in situ application are discussed. METHODS : Field surveys are conducted on two bridges in Yongsan-gu (Bridge A) and Seodaemun-gu (Bridge B) in Seoul using 3D GPR. The obtained survey data are used to calculate the dielectric constant map of each bridge using the extended common midpoint method. In addition, random points on both bridges are selected for the chloride content test in accordance with the KS F 2713 standard. The results from the dielectric constant map and chloride content test are compared. RESULTS : For Bridge A, it is discovered that the percentage of sections with a dielectric constant of 5.0 or less is 1.57%, whereas that above 5.0 is 98.43%; this indicates that the percentage of deteriorated sections for Bridge A is low. Meanwhile, for Bridge B, the dielectric constants calculated for the entire bridge exceed 5.0, which suggests no deterioration for Bridge B. Moreover, all the points selected for the chloride content test have less than 0.15% chloride content and have dielectric constants ranging from 5.0 to 7.0, which are favorable condition for the bridge deck. CONCLUSIONS : The analysis results of the dielectric constants of the concrete bridge deck obtained from the 3D GPR system are consistent with the actual chloride content results. Furthermore, additional verification of this method through field surveys on bridge sections with severe deterioration is highly recommended for future improvements.

This study attempted to interpret the meaning of the U.S.-China hegemony competition based on liberal theory, and predicted future U.S.-China relations by analyzing the hegemony confrontation between the U.S. and China. During the U.S.-China hegemony competition, countries around China, which are directly threatened by China, were divided into continental and maritime national groups, and the characteristics, concerns, and responses of those countries were considered. It proposed a new maritime-new continent global bridge economic block system, suggested strengthening economic cooperation, technical cooperation, cultural cooperation and liberal international order as its effectiveness, and suggested the need of a new international order during the Fourth Industrial Revolution.

Seismic fragility analysis of a structure is generally performed for the expected critical component of a structure. The seismic fragility analysis assumes that all the components behave independently in a structural system. A bridge system consists of many inter-connected components. Thus, for an accurate evaluation of the seismic fragility of a bridge, the seismic fragility analysis requires the composition of probabilities considering the correlation between structural components. This study presented a procedure to obtain the seismic fragility curve of a bridge system, considering the correlation between bridge components. Seismic fragility analysis was performed on a PSC bridge that is considered as the central infrastructure. The analysis results showed that the probability of the seismic fragility curve of the bridge system was higher than that of each bridge component.

The IoT-based sensor network is one of the methods that can be efficiently applied to maintain the facilities, such as bridges, at a low cost. In this study, based on LoRa LPWAN, one of the IoT communications, sensor board for cable tension monitoring, data acquisition board for constructing sensor network along with existing measurement sensors, are developed to create bridge structural health monitoring system. In addition, we designed and manufactured a smart sensor node for LoRa communication and established a sensor network for monitoring. Further, we constructed a test bed at the Yeonggwang Bridge to verify the performance of the system. The test bed verification results suggested that the LoRa LPWAN-based sensor network can be applied as one of the technologies for monitoring the bridge structure soundness; this is excellent in terms of data rate, accuracy, and economy.

구조물의 『3차원 설계』는 성공적인 BIM(building information modeling) 정착을 위한 핵심 기술이다. 이를 위해 다양한 BIM 라이브러리들이 개발되고 있지만 선형기반으로 구조물이 가설되는 교통 인프라의 설계업무에 적용하기에는 한계가 있다. 상용화된 BIM 소프트웨어들이 지원하는 라이브러리를 계획된 선형을 기반으로 구조물이 가설되는 교통 인프라의 설계 업무에 적용하는 것은 사용성 측면에서 한계가 있다. 더욱이 조합을 고려하지 않고 개발된 라이브러리로 생성된 모델은 다양한 설계변경 상황에 대응하기가 쉽지 않다. 따라서 본 논문에서는 교통인프라 구조물인 철도 교량을 대상으로, 유관 시설 또는 부재에 대한 3차원 객체를 설계변경에 효율적으로 대처할 수 있도록 매개변수 기법을 적용한 ‘BIM기반 3D 모델 생성 자동화 모듈’을 구축하였다. 모듈의 주요기능은 기준선형을 바탕으로 기준경로를 도출하고 다른 객체와의 조합을 고려하여 목표객체를 연장 및 배열하는 것이다. 또한 모듈의 조합으로 구성된 철도교량의 통합모델에 대하여 설계변수를 입력할 수 있는 사용자 인터페이스를 구성하여 설계변경 대응능력에 대한 적용성을 검증하였다.

In this study, The recent national interest is focused on the welfare of the people, and new projects in the construction sector are being reduced, and the aging of infrastructure is not getting attention. In domestic case, most of the infrastructures were built in the 1970s to 1980s, and the road extension is also steadily increasing. Therefore, the costs to bridge maintenance from around 2010 by a similar route to that of advanced countries are also 4 times And it is time to pay attention to maintenance as well as construction. Therefore, a study was carried out on the valuation method considering bridge condition evaluation, which is a part of BIM library building and assembly program development. The proposed value evaluation method will be used as an index of the existence of bridges by comparing the cost required for maintenance and reinforcement of the target bridges and the costs required for dismantling and disposal in the bridge management system of the future program

In this study, to develop the basis of damage prediction system for abutment type rigid-frame bridge, measurement data is generated by artificially expressing damage by Abaqus, a commercial structural analysis program, and applied to machine-learning. The rigid-rame bridge structural analysis model is expressed as closely as possible to the actual bridge condition considering the specification, damage expression, analysis method, boundary condition, and load. CNN(Convolutional Neural Network), one of the neural network algorithm, is used for machine-learning and accuracy is confirmed when there was no measurement error as a result of machine learning.