PURPOSES : The exposed aggregate number (EAN) and mean texture depth (MTD) of exposed aggregate concrete pavement (EACP) influence the functional performance of EACP in terms of pavement noise and skid resistance. The selection of the exposure time of EACP is important because the designed EAN and MTD of EACP can be achieved when the exposure process is performed at an appropriate time. On the one hand, too early exposure may cause protrusions and unwanted removal of aggregates and mortar. On the other hand, late exposure may cause difficulty in exposure of the mortar. In this study, a method to determine the optimum exposure time for EACP is suggested using a non-destructive method. METHODS : A set of laboratory tests was performed to investigate the variation in EAN and MTD of EACP according to the elastic modulus obtained by non-destructive equipment. From the results of this investigation, the optimum exposure time using the non-destructive method and the exposure time window (ETW) method was suggested. In addition, the usefulness of ETW suggested by laboratory tests was verified from a field application. RESULTS : From the laboratory tests, it was found that the targets of the surface condition of EACP (EAN: 59 per 25 cm2, MTD: 1.39 mm) can be achieved when the concrete elastic modulus is higher than 20GPa. The proposed guideline using the non-destructive method was applied for the field construction of EACP and achieved similar results. CONCLUSIONS : It was found that the proposed guideline for determining the exposure time window based on non-destructive testing is useful.

After harvest, Dolcetto cut roses were immediately exposed to air for 0 (E-0), 1 (E-1), 2 (E-2), and 3 h (E-3) and then placed under tap water for recovery. We determined the effect of air exposure time on vase life, water relations, and gene expression of cut flowers. The results revealed that E-0 treatment exhibits a higher postharvest quality of cut flowers than others. E-3 treatment significantly decreased the vase l ife of c ut r oses d ue t o an early f ailure o f water relations, such as larger stomatal size, higher transpiration, shorter time maintaining positive water balance, and the bacterial proliferation. E-0 treatment significantly decreased water stress, maintained leaf chlorophyll fluorescence ratios, and extended the vase life of cut roses. The decrease in water stress of E-0 treated flowers may increase the expression of Rh-PIP2;1 and Rh-TIP in rose petals, resulting in maintained cell turgor and increased flower diameter of cut flowers. These results recommend that a non-exposed harvest can be used for the harvest s tage to improve the postharvest quality of cut flowers. Understanding the relationship between air exposure time and water relations of cut flowers will significantly help in developing distribution systems for assuring cut roses quality.

In this study, a process is developed for 3D printing with alumina (Al2O3). First, a photocurable slurry made from nanoparticle Al2O3 powder is mixed with hexanediol diacrylate binder and phenylbis(2,4,6- trimethylbenzoyl) phosphine oxide photoinitiator. The optimum solid content of Al2O3 is determined by measuring the rheological properties of the slurry. Then, green bodies of Al2O3 with different photoinitiator contents and UV exposure times are fabricated with a digital light processing (DLP) 3D printer. The dimensional accuracy of the printed Al2O3 green bodies and the number of defects are evaluated by carefully measuring the samples and imaging them with a scanning electron microscope. The optimum photoinitiator content and exposure time are 0.5 wt% and 0.8 s, respectively. These results show that Al2O3 products of various sizes and shapes can be fabricated by DLP 3D printing.

Although piglets have been delivered by embryo transfer (ET) with in vitro produced (IVP) embryos and blastocysts, a success rate has still remained lower level. Unlike mouse, human, and bovine, it is difficult to a production of piglets by in vitro fertilization (IVF) because of an inappropriate in vitro culture (IVC) system in pig. Therefore, the present study was conducted to investigate whether minimized exposure time in IVC can improve the pregnancy and delivery rates of piglets. Immediately after IVM, the oocytes were denuded and co-incubated with freshly ejaculated boar semen for 3.5 to 4 hours at 38.5 ˚C under 5% CO2 in air. To avoid long-term exposure to in vitro state, we emitted IVC step after IVF. After that the presumptive zygotes were transferred into both oviducts of the surrogate on the same day or 1 day after the onset of estrus. Pregnancy was diagnosed on day 28 after ET and then was checked regularly every month by ultrasound examination. The 3 out of 4 surrogates were determined as pregnant (75%) and a total of 5 piglets (2 females and 3 males) were delivered at 118.3 ± 2.5 days of pregnancy period. In conclusion, a short-term exposure time may be an important factor in the production of IVP-derived piglets. It can be apply to the in vitro production system of transgenic pig by IVF, cloning, and pronuclear microinjection methods.

Hazardous air pollutants such as NO2, VOCs and PM10 were measured Daegu, Korea in major micro-environments,where housewives spend the most of their time, and personal exposure times were estimated by using time activitypatterns and exposure scenarios. The major microenvironments of housewives were selected using the ‘Time-UseSurvey’ conducted by the National Statistical Office in Korea in 2009. A total of 4,514 (weekdays) and 3,063(weekends) housewives were recruited for the ‘Time-Use Survey.’ It seems that housewives are spending about80% of their time in the house, and about 5% of their time outdoors during weekdays and weekends. The indoor/outdoor ratio of the average concentration of NO2 was more than 1, which indicated that the source was indoors.Toluene was shown to have higher concentrations indoors than outdoors. Ethylbenzene and xylene displayedsimilar characteristics to toluene, and the concentration ratio for indoor/outdoor was shown to be 1.29 ± 0.76 and1.04 ± 0.45, respectively, higher concentrations indoors. Based on the results of the time activity patterns ofparticipants, 3 kinds of exposure scenarios were formulated. The spent time and air concentration in eachenvironment were assumed as normal and lognormal distribution, respectively. And then the Monte-Carlosimulation was conducted. According to the result of the simulation, the exposures to hazardous air pollutantsrevealed an increasing pattern as housewives visits other indoor environments such as supermarkets.

In this study, we estimated nitrogen dioxide (NO₂) concentrations in microenvironments where residential indoor, residential outdoor, other indoors, and transportation using measured personal exposure and multiple linear regression analysis of time-weighted average model, and compared with measured NO₂ concentration in microenvironments. Measured residential indoor, outdoor and other indoor NO₂ concentration was 22.22±9.59 ppb, 23.64±9.62 ppb, and 22.07±13.90 ppb, respectively. NO₂ concentrations in residential indoor and outdoor, total outdoor, other indoor, and transportation by multiple regression analysis were significantly estimated as 20.48 ppb, 32.79 ppb, 24.35 ppb, and 28.82 ppb, respectively (p= 0.000). Measured and estimated NO₂ concentration were similar with each other, therefore NO₂ concentrations in each microenvironment were able to be estimated using time-weighted average model and personal exposure with multiple regression analysis.

In recent, the ISO has suggested a new guideline by using an avoidance behavior of soil invertebrates for the use of screening tools in the evaluation of soil contamination. In this study, we used a collembolan, Paronychiurus kimi which is native to Korea, as a test species because of its ecological relevance to Korean soil. The objectives of this study were to evaluate whether the exposure time (24, 48, 72, 96 and 120 h) and cadmium concentration (50, 100, 200 and 400 mg/kg of dry soil) affect the avoidance behavior of P. kimi. Twenty collembolans were introduced to the center of the soil which divided into two sections; cadmium untreated soil was placed in one of the section, and the cadmium treated soil was placed in the opposite section. To minimize soil structural effect on the avoidance behavior, the both soils were compacted by applying unidirectional force to the soil surface. The avoidance behaviors of P. kimi were not significantly affected by cadmium concentrations after 24 and 48 h of exposure, but were significant after 72-120 h. There results showed that avoidance behavior appears to be a good endpoint for the use in evaluation of soil contamination with 72 h of exposure duration.

Effects of three packing materials and exposure time on the mortality of Plodia interpunctella and Tribolium castaneum were studied using CO₂-modified atmosphere control. Materials used were triple layered craft paper (KKK), triple layered craft paper with one laminate coating layer (KLK), and triple layered craft paper with one HD film coating layer (KHK). In the test balls (ø 1.2 m) containing 85% CO₂-modified atmosphere, concentration of CO₂ in small packing envelopes (9.8×9.8 ㎝) made of the materials after one day was higher in KKK (26.67±0.58%) than KLK (23.33±0.58%) or KHK (20.67±0.58%). Both P. interpunctella and T. castaneum showed higher mortality in KKK than in either KLK or KHK. Similar results were obtained by larger space (9×4×3 m) and packing volume (20 ㎏) studies. The effect of the packing materials was clearer on T. castaneum more tolerant to CO₂ than P. interpunctella. Regression of the insect mortality on cumulative concentration time (∫<SUP>t</SUP>₀c × tdc ≈ ∑concentration × time) was highly significant. Control of P. interpunctella and T. castaneum by CO₂-modified atmosphere were discussed in relation to packing materials, cumulative concentration time of CO₂ and food products.

활성화를 통한 수핵란의 대량확보를 위해 44시간동안 체외 성숙된 돼지 난자를 ethanol, Ca/sup 2+/-ionophore, 6-DMAP 및 cycloheximide의 화학물질들을 사용하여 단위발생을 유기한 후 그들의 가장적합한 처리농도 및 노출 시간을 규명하였다. 1. Ethanol은 10%, 10분 처리가 전핵형성율, 난할율 및 배발달율에 있어 각각 약 53.4%, 51.6%, 그리고 39.9%로 가장 적합한 조건으로 판명되었다. 2. Ca/sup 2+/-ionophore 가장 적합한 난활성화 조건은 25μM에서 2분간 처리한 것이며, 전핵형성율, 난할율 및 배발달율은 각각 약 59.7%, 62.2%, 그리고 43.9%를 보였다. 3. 6-DMAP를 처리하여 돼지 난자의 활성화를 유기하였을 경우 2mM의 농도에서 각각 약 57.3%, 58.4% 및 29.0%의 전핵형성율, 난할율, 그리고 배발달율을 보여 가장 적합한 조건을 보였으며 2시간∼4.5시간 사이의 노출에는 영향을 받지 않았다. 4. Cycloheximide는 5㎍/ml의 농도가 전핵형성율 2.1%, 난할율 47.7%, 배발달율 31.8%로 가장 은 효율을 보였고, 노출시간에서는 4시간∼6시간 동안 처리하였을 때 60.5∼65.8%, 63.6∼66.7% 및 39.0∼39.5%로 가장 적합한 조건으로 판명되었다. 이상의 결과들은 돼지 체외 성숙 난자의 활성화에 있어 각 화학물질들의 적합한 조건을 바탕으로한 중복처리 및 병용처리 조건 확립 및 효율적인 수핵란의 확보에 기여할 수 있을 것이다.

This study was conducted to investigate the effects of preincubation time, concentration and exposure time of sperm on in vitro fertilization of porcine follicular oocytes rnatured in in vitro. The results obtained are as follows ; 1. Effect of preincuhation time for porcine sperm capacitation on in vitro fertilization in medium with heparin was investigated. Normal fertilization rate was highest in 15 min(26.4%). However, there were no significant differences among preincuhation times of 5~90 min, 2. Normal fertilization rates of sperm concentrations were 17.0~26.5%, and normal fertilization rate from l l05cell /ml concentration was also higher than those of other sperm concentration. 3. Normal fertilization rates of sperm exposure time of 4, 8, 12, 16 and 20 hours were 6.1, 20.8, 27.8, 25.0 and 26.7%, respectively. Normal fertilization rate from sperm exposure time of 12 hours was also higher than that of other sperm exposure times.

일상적으로 우리가 매일 경험하는 눈, 비, 바람, 기온과 같은 현상을 날씨라고 하며, 일정한 지역에서 장기간에 걸쳐 나타나는 대기 현상의 평균적인 상태를 기후라고 한다. 또한 기후가 평균적 상태에 비해 유의미하게 변동하는 것을 기후변화라고 한다. 콘크리트 구조물의 경 우 외부 극한기후환경에 노출 될 경우 다양한 문제점들이 발생할 수 있다. 이러한 문제점들 중 최근 가장 문제가 되고 있는 폭우, 폭설과 같은 극 한기후인자요소의 작용을 받아 발생 할 수 있는 동결융해에 대한 현상이다. 콘크리트의 경우 온도가 너무 낮거나 높다고 손상이 발생하는 것은 아니라 동결·융해를 반복적으로 받을 경우 심각한 내구성 저하를 나타나게 되며 실제 성능저하가 된 구조물의 경우 회복하기 힘들게 된다. 따 라서 본 연구에서는 극심한 기후변화로 발생 되는 다양한 기후인자 요소 중 풍속-일조시간의 기후변화 양생조건에 대하여 양생 후 콘크리트 동 결융해 실험을 접목시켜 상대동탄성계수를 측정하고 이를 바탕으로 성능중심평가 (Performance Based Evaluation (PBE))를 실시하고 대응책 을 마련하고자 한다.

현재 전 세계적으로 자연적, 인위적 요인으로 인하여 이상기후가 나타나고 있다. 이상기후의 대표적인 것으로 슈퍼태풍, 극한폭설, 폭염과 같은 극한 기후현상이 초래된다. 1970년대 산업화 시대 이후 급격하게 지구의 온도가 상승하는 것을 알 수 있으며, 이로 인하여 발생하는 가장 큰 문제점은 지구 온난화이다. 지구 온난화에 영향을 미치는 온실가스의 종류로는 이산화탄소, 과불화탄소, 아산화질소, 메탄과 같은 다양한 종류의 화학성분이 존재하며 특히 이산화탄소가 약 90%의 비중을 차지하는 것을 알 수 있다. 콘크리트의 경우 건설재료로써 탁월한 내구성능을 지니고 있으며, 사회기반시설물 건설 재료로 70%이상 사용되고 있다. 그러나 콘크리트는 타설직후 물리·화학적으로 다양한 환경조건으로부터 성능저하 현상이 발생하기도 한다. 특히 대기중의 이산화탄소는 콘크리트 알칼리도 저하에 따른 철근을 부식시키고 내구성 저하를 초래하게 된다. 따라서 본 연구에서는 풍속, 일조시간에 관하여 양생 한 후 콘크리트의 탄산화 실험을 접목시켜 탄산화 깊이와 탄산화 속도 계수를 측정하고 이를 바탕으로 만족도 확률 곡선을 통하여 성능중심평가(Performance Based Evaluation(PBE))를 수행 할 것이다.

본 논문은 1998년부터 2011년까지 강릉 지역의 지방 방사능 측정소에서 측정된 공간 감마선량률의 통계 적인 성질을 조사하였다. Autocorrelation Function Analysis(ACF), Rescaled Range Analysis(R/S Analysis), DetrendedFluctuation Analysis(DFA)의 방법들이 사용되었으며, 이 중 DFA는 non-stationary한 시계열의 장거리 상관성을 보여주는 좋은 방법으로 알려져 있다. 우리는 이 연구를 통해 다음의 사실을 알았다. 첫 번째, 공간 감마선량률은 두 가지다른 경향을 갖는 크로스 오버가 나타난다. 이것은 연중 공간 감마선량률은 강한 장기 기억 특성이 나타나는데 비해연간으로 넘어가면 상관성이 사라지는 것을 의미한다. 두 번째, 각 분석 방법들의 지수들이 있는데 이 지수들 사이의관계식이 맞음을 확인 하였다.