This study examined the feeding behavior and growth performance of 31 Hanwoo steers (10 months old; 278 ± 36.13 kg) within a precision livestock farming system using Roughage Intake Control (RIC) units for real-time data collection. Feeding behavior traits were derived from RIC database data using R software, with subsequent analysis conducted using SAS software. The results indicated that the steers visited the feed stations every 31.12 ± 11.99 minutes, averaging 11 ± 3.37 visits/day. Each feeding session lasted an average of 5.90 ± 1.55 minutes, resulting in a feed intake rate of 77.98 ± 22.53 g/min. Mean daily feed intake was 4.76 ± 1.36 kg, and body weight increased consistently, reaching an average of 412 ± 43.44 kg, with an average daily gain (ADG) of 1.26 ± 0.38 kg. Pearson correlation analysis revealed a strong relationship between daily feed intake and visit duration (r² = 0.621; p < 0.01) and an inverse correlation between daily feed intake and feed intake duration (r² = −0.445; p < 0.05), indicating behavioral adaptation. These findings highlight the importance of monitoring feeding behavior traits concerning growth performance, enhancing our understanding of individual animal behavior and its implications for productivity while emphasizing the role of advanced technologies in optimizing feed utilization in confined livestock systems.

폭풍해일 및 너울과 같은 고파랑으로 인해 발생되는 월파는 심각한 연안 침수 위험을 초래하며, 연안 시설과 주민의 안전을 위해 정확한 예측이 필요하다. 본 연구는 수치적, 경험적, 신경망, 그레디언트 부스팅(gradient boosting) 및 컴퓨터 비전 기반 모델들을 사용 하여 해안선 인근의 파고와 월파량을 포함한 월파 특성을 조사하였다. 동해안을 대상으로 한국 기상청(KMA), 일본 기상청(JMA), 미국 국 립환경예측센터(NCEP), 유럽 중기기상예보센터(ECMWF)의 기상데이터를 사용하여 ADCIRC 모델과 SWAN 모델을 결합하여 파고를 계산 하였다. 월파 감지용 CCTV가 설치된 동해안의 삼척항을 대상지역으로 선정하였다. CCTV에서 촬영된 영상들을 YOLO를 사용하여 분석하 였으며, 화면 내의 처오름 현상을 감지하였다. 수치모형의 성능은 예측된 파도 특성과 관측값을 비교하여 정성적, 정량적 측정을 통해 평 가하였다. 수치모형의 성능은 파고 예측에서 우수한 것으로 분석되었으며, 태풍과 비태풍 조건에서 파고는 각각 0.60m와 0.44m의 최소 RMSE이고 주기는 각각 1.68m와 1.84m의 RMSE로 분석되었다. 본 연구결과에 의하면 실시간 모니터링은 월파 특성에 대한 신뢰할 수 있는 예측 가능성을 가진다. 실시간 모니터링은 해안지역 보호를 위한 신속한 위험 평가 및 실시간 경보 제공에 활용될 수 있다.

본 논문에서는 건설 현장 관리의 과제를 다루고 IoT 기술 활용을 위한 기술 적용에 대해 정리하였다. 도로 포장 장비의 유휴 시간을 모니터링하는 IoT 장치를 설계 및 구현하여 효율적인 장비 관리 시스템을 개발하는 것을 목표한다. 또한, 본 연구에서는 통신방식 선 정, 사용자 친화적인 플랫폼 설계, 데이터 수집 및 분석을 위한 진동센서 기반 IoT 디바이스 개발을 통한 실시간 관리에 중점을 두고 있다. 플랫폼을 통해 공사현황을 실시간으로 모니터링하고 장비 유휴시간을 관리해 효율성을 높일 수 있으며, IoT 디바이스는 90% 이 상의 데이터 정확도를 보장한다. 현장 테스트를 통해 장비 사용 추적 효과가 확인되어 보다 효율적인 건설 관리에 기여하고자 한다.

High-temperature molten salts not only demonstrate exceptional thermal and chemical stability but also offer significant advantages in catalyzing chemical reactions. Consequently, they have garnered attention as a promising medium for next-generation nuclear reactors and a wide range of electrochemical processes. Nevertheless, the challenging experimental conditions in molten salts make applying conventional analytical methods to understand reaction mechanisms a formidable task. This underscores the imperative need for more intuitive approaches to investigate molten salt chemistry. One of the simplest yet potent methods involves real-time visual monitoring of the reaction system as chemical reactions progress. In light of this, we have developed an experimental system enabling real-time visual monitoring of the internal dynamics of molten salt media. This system can capture high-resolution videos and images within molten salts, surpassing existing methodologies. We have applied this system in various electrochemical experiments using the molten LiCl-KCl eutectic salt medium. Among them, this study primarily focuses on two challenging experimental scenarios that became comprehensible through our proposed system’s application: (1) the transpassivation of Zr metal and the agglomeration of potassium hexachlorozirconate (K2ZrCl6) solid salt, and (2) the solvation of electrons during the oxidation of Li metal within the molten LiCl-KCl eutectic salt.

원전 구조물의 실시간 모니터링 기술이 요구되고 있지만, 현재 운영 중인 지진 감시계통으로는 동특성 추출 등 시스템 식별이 제한 된다. 전역적인 거동 데이터 및 동특성 추출을 위해서는 다수의 센서를 최적 배치하여야 한다. 최적 센서배치 연구는 많이 진행되어 왔 지만 주로 토목, 기계 구조물이 대상이었으며 원전 구조물 대상으로 수행된 연구는 없었다. 원전 구조물은 미미한 신호대잡음비에도 강건한 신호를 획득하여야 하며, 모드 기여도가 저차 모드에 집중되어 있어 모드별 잡음 영향을 고려해야 하는 등 구조물 특성을 고려 해야 한다. 이에 본 연구에서는 잡음에 대한 강건도와 모드별 영향을 평가할 수 있는 최적 센서배치 방법론을 제시하였다. 활용한 지표 로서 auto MAC(Modal Assurance Criterion), cross MAC, 노드별 모드형상 분포를 분석하였으며, 잡음에 대한 강건도 평가의 적합성을 수치해석으로 검증하였다.

In the case of a die-casting process, defects that are difficult to confirm by visual inspection, such as shrinkage bubbles, may occur due to an error in maintaining a vacuum state. Since these casting defects are discovered during post-processing operations such as heat treatment or finishing work, they cannot be taken in advance at the casting time, which can cause a large number of defects. In this study, we propose an approach that can predict the occurrence of casting defects by defect type using machine learning technology based on casting parameter data collected from equipment in the die casting process in real time. Die-casting parameter data can basically be collected through the casting equipment controller. In order to perform classification analysis for predicting defects by defect type, labeling of casting parameters must be performed. In this study, first, the defective data set is separated by performing the primary clustering based on the total defect rate obtained during the post-processing. Second, the secondary cluster analysis is performed using the defect rate by type for the separated defect data set, and the labeling task is performed by defect type using the cluster analysis result. Finally, a classification learning model is created by collecting the entire labeled data set, and a real-time monitoring system for defect prediction using LabView and Python was implemented. When a defect is predicted, notification is performed so that the operator can cope with it, such as displaying on the monitoring screen and alarm notification.

Recently, an international issue due to the discharge of contaminated water from the Fukushima has been highlighted. Since the Fukushima nuclear power plant accident in japan, marine environmental radioactivity survey has been strengthened with increased sampling frequency and range for seawater in territorial waters. And a stationary underwater radiation monitoring system including floating equipment-based system such as oceanographic buoys, tidal stations have been deployed on-site to detect abnormal radiological events. However, stationary monitoring systems may be insufficient for the early detection of abnormal radioactivity over a wide area, since it is a passive way of waiting for radioactive materials to spread in the ocean. So, our team developed a ship-mounted seawater gammaray monitoring system that can be operated remotely and in real time. In this study, it includes a detailed description of the design, installation, monitoring method, and operation of the system.

최근 농지 및 수자원의 염류화로 인해 염생식물에 대한 작물화와 생육 조건 구명을 위한 연구 필요성이 높아지고 있다. 그러나 재배 조건 변화에 따른 작물의 생육 및 기능성 성분 변화 분석을 위해서는 양액 및 작물 생육부 시료를 채취하여 이를 전처리 및 분석해야 하여 시간적, 인적 자원의 소모가 높다. 본 연구에서는 염생식물의 최적 생육 조건 구명을 효율적으로 수행하기 위해 비파괴적으로 재배 현장에서 실시간으로 작물 생육부와 수경재배 근권부의 염분 농도를 모니터링할 수 있는 시스템을 개발하였다. 개발 시스템을 통해 NaCl 0 mM, 50 mM, 150 mM, 300 mM의 4가지 농도 조건에서 갯방풍을 대상으로 재배실험을 수행한 결과, 재배 중 염분 농도 수치의 변화 및 염분 농도가 높을수록 생체중이 감소하는 것을 확인하였다. 실제 생육 분석 결과에 따르면 개발 시스템을 통한 모니터링 결과에 상응하는 생체중 결과를 확인하여 염생식물의 생육 모니터링 적용이 가능할 것으로 평가되었다. 그러나 단위 생체중 당 기능성물질 함량의 경우, NaCl 농도가 증가할수록 증가하는 것으로 나타나 갯방풍의 상업적 재배 조건의 구명을 위해서는 생체중 외에 기능성 성분의 모니터링을 위한 시스템 보완이 필요하다고 판단되었다.

The aging society are causing complicated problems from chronic diseases such as diabetes, heart disease in aged patients. Recently Covid pandemic swept across global aging societies and put aged people with chronic disease more vulnerable to mobidity. Therefore, from view of preventive and precision medicine, remote monitoring an aged people with chronic disease is an important issue than ever. Smart health care systems as remote monitoring is so called telemetry system which enable doctors or health care providers to manage remotely to consult, diagnose and treat patients with chronic disease and infectious disease as well. The goal of telemetry system is to meet timely medical need in aged patients in distant place through communication technologies. Through technological breakthrough, particularly in real-time health care industry, Telemetry system with realtime mornitoring of heart rhythm and blood glucose level can play an important role in managing healthcare services in aged patients. This report introduces a comprehensive and inclusive review on the usefulness of realtime patiens monitoring with wearable sensors in telemedicine applications. The findings of this report are as follows: (1) The advantage of real-time monitoring and blood glucose level and biofeedback based on visual data (2) The advantage of realtime-monitoring heart rhythm coupled with blood glucose level. (3) There is an additional need to produce a digital imaging from protable diagnostic divices such as X-ray and ultrasound.

Pacific herring, Clupea pallasii, a keystone species with significant ecological and commercial importance, is declining globally throughout much of its range. While traditional fishing equipment methods remain limited, new sensitive and rapid detection methods should be developed to monitor fisheries resources. To monitor the presence and quantity of C. pallasii from environmental DNA (eDNA) extracted from seawater samples, a pair of primers and a TaqMan® probe specific to this fish based on mitochondrial cytochrome b (COB) sequences were designed for the real-time PCR (qPCR) assay. The combination of our molecular markers showed high specificity in the qPCR assay, which affirmed the success of presenting a positive signal only in the C. pallasii specimens. The markers also showed a high sensitivity for detecting C. pallasii genomic DNA in the range of 1 pg~100 ng rxn-1 and its DNA plasmid containing COB amplicon in the range of 1~100,000 copies rxn-1, which produced linear standard calibration curves (r2=0.99). We performed a qPCR assay for environmental water samples obtained from 29 sampling stations in the southeastern coastal regions of South Korea using molecular markers. The assay successfully detected the C. pallasii eDNA from 14 stations (48.2%), with the highest mean concentration in Jinhae Bay with a value of 76.09±18.39 pg L-1 (246.20±58.58 copies L-1). Our preliminary application of molecular monitoring of C. pallasii will provide essential information for efficient ecological control and management of this valuable fisheries resource.

PURPOSES : For large-scale construction, such as a concrete pavement, design and construction are not entirely consistent. If the inconsistency between design and construction is very large, construction quality is significantly degraded, affecting performance life span and driving comfort. The quality of pavement construction is managed according to standards. However, it is difficult to improve construction quality as the standard measures construction quality after construction is completed. Therefore, this study developed a system to measure the construction quality of concrete pavement in real-time and presented the corresponding standards. METHODS : A basic module for simultaneously measuring the width, thickness, and roughness of the concrete pavement was designed. Based on the measurement results of the distance measurement sensor, a calibration method is presented that can remove noise. The system process was developed to measure construction quality based on location and distance data, measured in real-time using GPSs and sensors. The field application experiment was conducted and the results were analyzed. RESULTS : The measurement module is properly designed to be used in concrete pavement construction sites. Noise was removed from the distance measurement sensor results according to the presented calibration method, leaving only the wave of pavement surface irregularities. As a result of applying the system process in the field application, a reasonable level of PRI was observed. CONCLUSIONS : In the past, the width, thickness, and roughness were measured after construction was completed and, if the standard was not met, construction quality control was performed via reconstruction or repair. Through this study, it is expected that the width, thickness, and roughness of the concrete pavement can be measured in real-time and, if the standard is not met, construction quality can be immediately controlled during construction to maintain high quality.