iRAP(international Road Assessment Program)에서는 최근 다양한 유형의 도로 정밀자료를 바탕으로 한 AiRAP(Accelerated intelligent Road Assessment Program)을 개발하여 여러 국가별 RAP에 확대 적용해나가고 있는 단계에 있다. 2023년부터 국내 도로 여건을 고려한 한국형 도로안전도 평가 프로그램 개발 연구가 진행 중에 있으며, 개발되는 평가항목 및 기준, 평가기술 등에 적합한 도로안전도 평가 기초데이터 역시 유형 및 범위에 변화가 필요해짐에 따라 이를 충족하는 기초데이터 수집이 가능한 도로안전도 조사장비 개발이 기획 되었다. 이에 따라 본 연구에서는 고사양의 360도 도로영상 촬영장치와 360도 128채널 LiDAR 센서, 정밀 GPS 시스템, 휴대용 운영장 치 등을 갖춘 도로안전도 조사장비를 일반 차량에 탈부착이 가능한 형태로 개발하고자 하였다. 본 개발 장비로 취득 가능한 도로영상 및 점군데이터를 활용하여 AiRAP 자동분석을 통한 도로안전도 평가가 가능한데, 이를 통해 객관적이고 신뢰성 높은 평가가 가능할 것으로 기대된다.

In this paper, we propose a analysis of domestic and foreign standards on protecting human body from EMF(Electromagnetic filed) and effect of the human body through EMF analysis of military electronic equipment in operation. We measured the EMF intensity of the side lobe and back lobe main beam on Radar Equipment at an accessible position. As a result, it was confirmed that the measured EMF intensity of three types of radar equipment did not exceed the standard on domestic protecting human body from EMF.

In order to find out the management and sanitation status of protective gear provided at the construction site, a case study and survey were conducted by visiting the site. As a result of the case study, inspection and management, disinfection, and storage of protective equipment were insufficient in both workplaces with less than 50 employees and workplaces with more than 100 employees. As a result of the survey, workers(66.2%), said they did not know how to identify hard hats(67.6.%), how to identify bad hard hats(60.8%), and how to identify bad safety belts (73.0%), even though workers(66.2%) were educated on protective gear, and those in charge of protective gear Non-specified(56.8%), regular inspection of the provided protective equipment was not performed(82.4%), and disinfection was not performed(90.5%). Therefore, as a management plan to maintain the performance of personal protective equipment, educational aspects, regular training on protective equipment, training on how to identify defective protective equipment, management of recording papers, technical aspects, strengthening of standards for placement of dedicated safety managers in small workplaces, participation of workers’ representatives when selecting protective equipment, and selection of protective equipment for workers Providing opportunities, administrative aspects of protective equipment regulation and management, introduction of sanitary and cleanliness system, and selection of personnel in charge of protective equipment management were suggested.

Through the inspector's real name to improve the quality of inspection is to show the design Radiological examination pursuant to the Ordinance of the Ministry of Health and Welfare for patient safety in the Image. However, the use of existing and in EMR, equipment within the handwriting input, the individual initial use has a problem. In this study, increasing the stability of the patient and the precise inspection, In order to increase the efficiency and convenience than the real-name system for quality control inspectors of medical equipment, Using the EMR and PACS developed and applied to evaluate the usefulness of automatic enrollment. Enter your information in the EMR, which was developed markers that inspectors use to compare the before and after images PACS satisfaction. Convenience than using traditional, consistency, the entry of the missing were higher as a statistically significant difference. A test strip automatic enrollment programs are developed in this study. You can increase the stability of the patient by checking the image to show the real tester, we expect the quality of care would be improved.

최근 제품의 개발 주기가 지속적으로 단축되고 있으며, 많은 기업에서는 이에 따른 제품개발 프로세스의 혁신을 위한 노력을 끊임없이 하고 있다. 현재의 공학기술측면과 새로운 기술개발측면에서는 고객의 요구사항 분석, 기술개발 실현 등 많은 발전이 있 었지만, 제품의 안전성이나 신뢰성 측면의 기술 개발 속도는 여전히 더딘 실정이다. 이러한 문제점을 해결하기 위한 가속신뢰성시험 중에 초가속수명시험(HALT : Highly Accelerated Life Test)은 최단기간에 제품의 신뢰성을 확보 할 수 있는 신뢰 성시험 기법이다. 이에 따라 최근에는 대기업을 중심으로 HALT의 수요가 급격히 증 가하고 있다. 하지만 국내 연구소와 시험 서비스 기업에서 보유하고 있는 HALT 장비 는 매우 제한적이며, 대부분 수입에 의존하기 때문에 구입과 설치에 많은 비용이 필요 하다. 이러한 이유로 중소기업에서는 HALT 장비의 효과적 활용에 많은 어려움을 겪 고 있다. 정부에서는 이러한 문제점을 해결하기 위해 HALT 장비의 국산화 개발을 추 진 중이다. 본 논문에서는 HALT 장비의 안전성을 확보한 국산화 개발을 위해 리스크 분석 방 법을 조사해보고자 한다.

PURPOSES : The purpose of this study is development of automatic equipment to measure the road water-reservoir which can be one of factors for road traffic safety inspection and its application to safety analysis. METHODS : The scopes of this study are the examination of the riskiness and location of road water-reservoir through literature review, development of appropriate sensor and automatic equipment to survey the road water-reservoir and evaluation of field application. RESULTS: The laser lighting and IR camera were selected to develop the equipment. It was found from the field calibration that there is a high correlation between rutting and road water-reservoir and road water-reservoir caused by rutting can be correctly calculated. About 20.2km of national highway were inspected for case study and field application. It was found from correlation of traffic incident that 2.08km of the latent length for water-reservoir which is related to 12 traffic incidents were analyzed. CONCLUSIONS : This technique can be utilized evaluation method for road condition such as road water-reservoir for conventional evaluation system such as road traffic safety assessment and safety analysis and it can be use to new evaluation system to apply various road condition and traffic condition.

This paper is the product development of environment and safety. In growing society, the bicycle is need to have a common goals for consumers convenience and theft prevention. The bicycle is movable means. But as times passed, that bicycle is strongly recommended to replace other vehicles because that is not produced to air pollution and energy(gas, diesel etc) insufficiency. As workers using a bicycle are increased, road for only bicycle is made by additionary. The bicycles happens to several moving accidents such as car accidents because of signal mismatch between bicycle users. However, using the development products of this paper, many accident problems for bicycle can be solved. As increasing of bicycles numbers, the high cost bicycles are too increased. So, the more theft of bicycle is also happened. The developed products(turn signal system and theft prevention system) through this study kept your bicycles from more convenience and more safe.

As contemporary building construction type is getting higher and deeper, construction equipment usage is getting more, and related fatal accidents are on an increasing trend. Because of this, a method was drawn which could grasp the present state of construction equipment management and manage safety of the equipment more easily for accident prevention by choosing 2 kinds of Construction equipment which cause safety accident frequently among the equipment mainly used in construction site. This study suggested a method about construction equipment safety management using "smart phone" base which could be used in safety management for construction equipment by whomever in construction site. After attachment of QR code included safety checklist, It became possible that site managers could check more efficiently by scanning with their smart phone when they inspect equipment. Moreover, by the construction interested who didn't know what and how they have to inspect could point out unsafe condition in the early stage of equipment entering or take unsafe one out of the site by using new smart phone safety checking system is installed, it became possible that critical accident caused by construction equipment was prevented in advance.

본 연구에서는 당직항해사의 해상상황 인식개선을 위해 시각적 항해보조 장비를 개발하고 그 성능시험 결과를 분석하였다. 개발된 장비는 Pan/ Tilt 내부에 고성능 카메라와 레이져 거리 측정기를 장착하고 있다. 개발된 장비를 선박에 장착하여 실선 실험을 수행함으로써 각 요소별 성능을 평가하였다. 이 결과를 바탕으로 개발 장비의 형식 승인을 위한 장비 환경 평가와 성능 평가 요소를 지정하였고 그에 대한 평가방법을 제시하였다.

As contemporary building construction type is getting higher and deeper,construction equipment usage is getting more, and related fatal accidents are on an increasing trend. In these days, due to the deteriorating construction business circumstance, job finding problem of equipment operator, and dumping contract, equipment lease suppliers are putin jeopardy. In high-rise building construction, especially tower crane, mobile elevated work platform and other High place operation cars among construction equipment cause many critical accidents because of drop supply of construction biding bringing out dumping contract could cause unsafe and poor construction management. Because of this, a method was drawn which could grasp the present state of construction equipment management and manage safety of the equipment more easily for accident prevention by choosing 2 kinds of Construction equipment which cause safety accident frequently among the equipment mainly used in construction site. This study suggested a method about construction equipment safety management using ‘‘smart phone’ base which could be used in safety management for construction equipment by whomever in construction site. After attachment of QR code included safety checklist, It became possible that site managers could check more efficiently by scanning with their smart phone when they inspect equipment. Moreover, by the construction interested who didn’t know what and how they have to inspect could point out unsafe condition in the early stage of equipment entering or take unsafe one out of the site by using new smart phone safety checking system is installed, it became possible that critical accident caused by construction equipment was prevented in advance.

The purpose of this study is to attempt a Analysis of a pointed-end Equipment Arm Safety-Accident for Fault Tree Analysis. Three major techniques were used first problem is Z-Model by which accident Analysis & prevention of a pointed-end Industry can be made, Fault Tree Analysis(FTA) bywhich quantification of a pointed-end Equipment accident Analysis can be made it 5 years in past and the third, manual-written by which minimal cut set to accident can be Identified. A example has been made of issue point a pointed-end Equipment that the Arm in loader happen to Injuries. According to the Analysis lack of safety knowledge, unsafety-behavior seem to be the primal cause of accident. Comparision of the accident cause to actual report demonstratesthat the FTA a efficient tool for Industrial Accident prevention.

There is much dangerous machine in worksite. These make the rate of accidents increase. Specially, among them, dryness equipment work has the highest rate of accidents. Therefore, it has been managed by safety-health law. It is very important to make a special study of work using the dangerous machine. In press work, it is also important to develop safety system program to improve productivity and work safely In this reaserch. the safety mangement system is built for the work improvement of the Press. I will try new development method about dangerous machine.