Recently, the demand for large diameter piles has been rapidly increased in order to secure the allowable bearing capacity of pile foundation due to the increase of large structures such as high rise buildings. In this study, to improve the shear capacity of a conventional PHC pile, a large diameter composite PHC pile strengthened by in-filled concrete and shear reinforcement was manufactured. All the piles were tested according to the shear strength test method of Korean Standard. As a result of the shear test, the F-type piles which are produced without shear reinforcement occurred abrupt horizontal cracks after flexural and inclined shear cracks occurred. On the contrary, the FT-type piles which are produced with shear reinforcement exhibited stable flexural and inclined shear cracks uniformly over the entire pile without abrupt horizontal cracks. Furthermore, the maximum load of the large diameter composite PHC pile improved to 2.9 times in the F series, and more than 3.3 times in the FT series compared to the conventional PHC pile. This result indicated that FT-type piles had excellent composite behavior due to the shear reinforcement and effectively prevented the unstable growth of inclined shear cracks.

In this paper, the shear performance of the deep beams with high strength headed reinforcement was evaluated. The experimental parameters are horizontal stiffener and fusing length. The shear span-depth ratio (a/d) of specimens was 1. The development length of headed reinforcement was evaluated to have a great influence on the shear strength of the deep beam.

This study was made to examine the motion characteristics according to the reinforcement of the reinforcement length and stiffener reinforcement for shear reinforcement to the foundation structure reinforced with shear reinforcement steel plate. Experimental study was made after specimen was installed on the ground as the same as in the practical site. Reinforcement lengths of the steel for shear reinforcement are divided into 1,000 mm, 1,200 mm and 1,400 mm in the specimen and as for reinforcement method of the stiffener, 4 stiffeners with interval of 100mm reinforced with the same materials as the shear reinforcement were manufactured for the experiment. Considering result of the experiment, it is expressed that no effect of the stiffener reinforcement was found and regarding the reinforcement length of shear reinforcement material the crossed point of the two converted lines of the value that the shear force is expressed in the bearing power in the expanded dangerous section and the value that the shear capacity receivable by the reinforcement materials in the dangerous section is proposed as effective reinforcement length.

This paper is about experimental works to evaluate the effects of fiber reinforcement to shear behavior of RC deep beams with high strength hooked bars. It was planned two specimens with different shear span-to-depth ratio. Specimen had three loading points to induce shear failure. From test results, it showed that maximum shear strength of specimen with shorter shear span to depth ratio was higher.

In this study aims at exploring the use of steel frame as an innovative method of improving the seismic performance of link beams. Also, the effect of diagonal reinforcement in link beam is evaluated in comparison to conventional reinforcement.

This study was examined to the shear friction applied compressive stress at construction joint and monolithic joint with or without transverse reinforcement. The analysis of test results were compared with ACI 318 code. The reduction ratio of the shear friction strength regardless of construction joint were similar with ACI 318 code. The relative slip amount at the peak of shear stress on the all of the specimens was increased about 33% by the transverse reinforcement.

By attaching the adhesive retrofit material using wire and nylon to masonry walls, the changes in the shear strength of the walls were examined through experiments. In the experiment results, when the adhesion of the adhesive retrofit material was secured, the shear strength and the yield displacement ratio of the masonry walls were largely improved, and the falling of the walls did not happen, which has verified the retrofitting effect of the adhesive retrofit material.

This study was experimented direct shear strength of normal-weight and heavyweight concrete considering transverse reinforcement type(Vertical and X Type). The test results showed that the direct shear strength of heavyweight concrete was 20% higher than normal-weight concrete. also, direct shear strength of transverse reinforcement was effective at least 1.47 times regardless of the type of concrete.

중공슬래브는 슬래브의 자중을 감소시킴으로써 콘크리트 하중을 제어하여 수직 구조 부재 하중 및 지진 하중의 양을 감소시키는 바닥구조시스템이다. 중공슬래브는 슬래브의 자중을 획기적으로 줄일 수 있지만 슬래브 내부의 중공부로 인하여 휨 및 전단강도가 감소하기 때문에 구조 성능의 예측이 매우 중요하다. 중공슬래브에 관한 국내외의 많은 연구에도 불구하고 일방향 중공슬래브의 전단보강에 따른 전단강도에 관한 연구는 많이 이루어지지 않고 있다. 따라서 본 연구에서는 전단보강 유무에 따른 일방향 중공슬래브의 파괴양상 분석과 산정식의 전단강도와 실험값의 전단강도의 비교를 통하여 일방향 중공슬래브의 전단보강의 필요성에 대해 검증하고자 한다.

In this study, the necessity of shear reinforcement for one-way voided slab is verified through the experiment. The shear reinforcement for one-way voided slab needs to be considered for improvement of its structural performance, according to analysis results about the shear strength and the failure mode of its specimens.

철근콘크리트 구조물의 전단거동은 수년간의 많은 연구에도 불구하고, 이론적으로 명확하게 규명하기에 어려운 문제중에 하나이다. 중공슬래브의 휨강도와 전단강도는 중공부로 인하여 감소되기 때문에, 이에 따른 구조물의 성능을 예측하는 것은 중요한 문제라 할 수 있다.현재 각국의 중공슬래브 전단설계기준은 실험에 의한 기준식을 제시하고 있다. 따라서 본 연구에서는 철근비에 따른 일방향 중공슬래브 전단강도 산정방법에 관한 연구를 수행하기 위해 실험결과를 분석하고, 전단강도 산정식들을 비교, 분석하였다.

In this study, experimental research was carried out to evaluate the structural performance of high strength R/C interior beam-column joints regions, with or without the shear reinforcement. Specimens designed by the interior beam-column joint regions without the shear reinforcement of existing reinforced concrete building showed a unstable mode of failure and an decrease in load-carrying capacity and energy dissipation capacity and ductility ratio.

For the joint connection of the precast steel grid composite decks, a prefabricated joint which is composed of a concrete shear key and high-tension bolts was already proposed. In this study, for the purpose of increasing the bending stiffness and bending strength of the proposed prefabricated joint section details of the proposed joint are modified, and through experimental tests the bending performance, such as stiffness and strength of a modified joint, are compared with those of the proposed joint.

In this study, experimental research was carried out to evaluate and improve the constructability and structural performance of high strength R/C interior beam-column joints regions, with or without the shear reinforcement, using high ductile fiber-reinforced mortar. Specimens designed by retrofitting the interior beam-column joint regions of existing reinforced concrete building showed a stable mode of failure and an increase in load-carrying capacity due to the effect of enhancing dispersion of crack control at the time of initial loading and bridging of fiber from retrofitting new high ductile materials during testing.

To define the shear reinforcing effect of steel fiber in high strength concrete, 4 column specimens designed with a volume fraction of steel fiber such as 0.0%, 1.0%, 1.5%, 2.0%. The column specimens were tested lateral cyclic load under constant axial load. From test results, steel fiber can reduced brittle shear failure, and can increased strength and ductility capacity in RC columns.

In this study, experiments were performed in order to evaluate the concrete breakout strength of shear reinforcement considering anchorage type and embedment depth. and Using the result, we provide basic data for the design of shear reinforcement. According to the experimental results, If the concrete strength is relatively low and thin flat plate, we need a design considering the concrete breakout failure than concrete bearing failure.

The PHC pile offers high compressive strength, resistance to bending moment, economic efficiency and many other benefits. Being vulnerable to lateral force, however, it can only be applied in limited situations in which the strong lateral force doesn't need to be put in place, thus requiring the development of new forms of pile. For this reason, this study produces a concrete-Infilled Composite PHC pile(ICP pile) reinforced with shear reinforcement and ilfilled concrete and conducts a shear test according to KSF 4306.

Coupling beams of coupled shear wall systems are often the most critical members in medium or high rise buildings subject to seismic load or wind loads. To ensure the survival of shear walls under high-intensity cyclic loading, these beams, which normally have limited dimensions, should possess high deformability and good energy absorption while being able to resist large shear force. Experimental work are conducted to illustrate the design of special RC coupling beams using the proposed procedure reinforcement details.

본 연구에서는 전단보강근 비율이 다양한 철근콘크리트 보에 대하여 가열시간을 각각 달리한 후 그 구조성능변화를 실험적으로 연구하였다. 또한 기존의 기준에서 적용하고 있는 부재의 내력산정방법에 대한 검증을 통하여 화재손상된 철근콘크리트 강도예측을 위한 자료를 제공하고자 한다. 이를 위하여 9개의 철근콘크리트 보를 제작하여 표준가열곡선에 따라 가열로에서 가열시험을 실시하고, 이들 손상된 보에 대한 파괴실험을 통하여 구조성능의 변화를 관찰하였다. 또한 부재와 동일한 피복을 가진 철근에 대하여 가열후 철근강도변화를 관찰하여 가열에 따른 철근의 물성변화를 파악하였다. ACI기준과 Eurocode 기준을 분석하고 실험결과와의 비교를 통하여 화재손상된 RC부재의 구조성능변화를 평가하였다. 연구결과, 1시간과 2시간 가열된 실험체가 무가열실험체들에 비하여 매우 취성적인 파괴양상을 보였고, 이러한 양상은 전단보강근비가 작아질수록 그리고 가열시간이 증가할 수록 심하게 나타났으며, 화재에 의한 재료손상의 정확한 예측이 가능할 경우, 부재의 구조성능변화는 충분히 평가가능한 것으로 나타났다.

본 연구에서는 거주형 무량판 구조의 뚫림 전단을 방지하기 위한 연속 절곡된 전단 보강근을 개발하였다. 이를 적용한 슬래브-기둥 접합부에 있어 개발 전단 보강근의 뚫림 전단 성능을 평가하기 위하여, 구조 성능 실험을 수행하였다. 실험 변수는 전단보강근이 없는 경우, 개발 전단보강근을 사용한 경우, 헤드 스터드를 사용한 경우이다. 수평하중에 대한 저항성능을 평가하기 위하여 일정축력하에서의 이력 하중 실험을 수행하였다. 실험결과는 전체 변위 및 접합부 강도 등으로 평가되었다. 이러한 결과로부터, 개발된 전단보강근이 층간변위비 거동에 있어 우수한 성능을 보유함을 확인할 수 있었다.