Considering the features of body repair for automotive body where same damage and repair conditions does not exist in car accident, it is essential to acquire know-how and continuously approach new materials and new technologies on the site of maintenance where the theoretical instruction of textbook cannot react accurately minute by minute. Especially, in case of car repair from unexpected accidents such as body repair or dent repair, it is difficult to satisfy vehicle owners despite their request. Accordingly, this study researched the better maintenance technology to restore to its original state with more improved technology as vehicle owners wish. This study made time to repair reduced by 98% and the cost reduced by 79.6% through the accurate diagnostic technique before repair and maintenance technologies of body crash analysis applying property of high-speed tensile. It also obtains intangible effects including prevention of environmental pollution and maximization of vehicle owners satisfaction.

PURPOSES: This study aimed to analyze traffic accidents at circular intersections, and discuss accident reduction strategies based on land use and vehicle type. METHODS : Traffic accident data from 2010 to 2014 were collected from the “traffic accident analysis system”(TAAS) data set of the Road Traffic Authority. To develop the accident rate model, a multiple linear regression model was used. Explanatory variables such as geometry and traffic volume were used to develop the models. RESULTS: The main results of the study are as follows. First, it was found that the null hypotheses that land use and vehicle type do not affect the accident rate should be rejected. Second, 16 accident rate models, which are statistically significant (with high R2 values), were developed. Finally, the area of the central island, number of speed humps, entry lane width, circulatory roadway width, bus stops, and pedestrian crossings were analyzed to determine their effect on accidents according to the type of land use and vehicle. CONCLUSIONS: Through the developed accident rate models, it was revealed that the accident factors at circular intersections changed depending on land use and vehicle type. Thus, selecting the appropriate location of bus stops for trucks, widening entry lanes for cars, and installing splitter islands and optimal lighting for motorcycles were determined to be important for reducing the accident rate. Additionally, the evaluation showed that commercial and mixed land use had a weaker effect on accidents than residential land use.

The findings were summarized as follows. The safety check by manufacturer showed that 6 of 13 companies are over the average occurrence of defects. It was expected that there would be a difference between manufacturing technology capability and production system of each manufacturer. Consequently, manufacturers should institutionally improve and strengthen certification items for the upward standardization of safety certification before factory. Second, the safety check by year showed that the results of this study accord with those of previous studies on defect time. Consequently, manufacturers should classify the 3-year-old equipment for vehicle-mounted MEWP into a special check subject to do a nondestructive test according to proven results, and also reflect the test in a safety test system to do regular preventive activities of equipment defects. Third, the safety check by part showed that the boom and outrigger parts of vehicle-mounted MEWP have the most defects. Stress concentration resulted in defects as the boom part was most frequently operated in the structural parts for a real work. To prevent this, it is suitable to improve the hardness of boom materials. The outrigger part needs improvement in safety devices with materials. As an outrigger supports the overturning moment of equipment, it is most affected by its load based on the operating radius, resulting in fatigue crack.

The purpose of this study was to investigate the performance and quality of engine mounting member in repair parts of the accident vehicles by conducting mechanical and material properties experiments. The tests were conducted by the test equipments of chemical components analysis, radiographs and mechanical testing on the genuine parts and non-genuine parts of engine mounting member. Test results concluded; Tensile strength of genuine parts is about 270 N/㎟ but damaged non-genuine parts about 200 N/㎟. The chemical component of 12 components was similar genuine part to non-genuine parts but Ti, Ni component were appeared different. Non-genuine parts were 4 times in elongation, 2 times in hardness higher than genuine parts. We concluded that quality identification system of repair parts and circulation system establishment of repair parts market were needed.

본 연구는 차종별 사고모형을 다루고 있다. 연구의 목적은 청주시 143개 4지 신호교차로에서 발생한 차종별 사고모형을 개발하는 것이다. 이를 위해 이 연구는 EPDO(대물피해환산법)와 교통 및 기하구조 요인과의 관계를 설명하는데 중점을 두고 있다. 분석된 주요결과는 다음과 같다. 첫째, 신뢰수준 90% 이내에서 통계적으로 유의한 6개의 음이항 회귀모형이 개발되었다. 둘째, 모형의 σ2값은 0.14307(승용차), 0.35556(대형승합차), 0.21684(소형승합차), 0.205152(이륜차), 0.32338(소형트럭), 0.29046(대형트럭)으로, 이는 모두 통계적으로 의미있는 것으로 분석된다. 마지막으로 모든 모형의 공통된 사고요인은 ADT(일평균교통량)이며, 승용차의 특정 사고요인으로는 주도로차로폭합, 대형승합차의 경우 평균황색시간, 그리고 소형승합차의 경우 주도로와 부도로의 차로수 차이로 분석되었다.

Forklift achieves transportation of freight and continues loading and unloading work repeatedly long for hours in industry spot. Therefore, drivers feel tired make a mistake for wrong operation of vehicle caused by continuous work. These components are resulted in CTDs, some industrial accident. That is the forklift need to ergonomics access. So, in this paper, requirements of forklift user were abstracted using questionnaire, produced important design factor for pedal and lever using QFD(Quality Function Deployment), and then suggested ergonomic considerations for industrial accident prevention.

Many accidents by side-wind have been reported worldwide when vehicle passes through the bridges. In order to solve this problem, it needs to investigate the accident cases and to classify the accident types. Therefore, it can lead to adequate plans for prevention.