간행물
한국산업경영시스템학회지 KCI 등재 Journal of Society of Korea Industrial and Systems Engineering
- 발행기관 한국산업경영시스템학회
- 자료유형 학술지
- 간기 계간
- ISSN 2005-0461 (Print)2287-7975 (Online)
- 수록기간 1978 ~ 2025
- 주제분류 공학 > 산업공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
Vol. 35 No. 4 (2012년 12월) 29건
21.
2012.12
구독 인증기관 무료, 개인회원 유료
When manufacturing die casting mold, generally, the casting layout design should be considered based on the relation among injection system, casting condition, gate system, and cooling system. Also, the extent or the location of product defects was differentiated according to the various relations of the above conditions. In this research, in order to optimize casting design of an automobile part (Gear Box) Computer Aided Engineering (CAE) was performed by using the simulation software (ZَCast). The simulation results were analyzed and compared with experimental results. During the mold filling, internal porosities caused by air entrap were predicted and reduced remarkably by the modification of the gate system and the configuration of overflow. With the solidification analysis, internal porosities caused by the solidification shrinkage were predicted and reduced by the modification of the gate system. For making a better production dieَcasting tool, cooling systems on several thick areas are proposed in order to reduce internal porosities caused by the solidification shrinkage.
4,000원
22.
2012.12
구독 인증기관 무료, 개인회원 유료
Assessing service quality and satisfaction is the essential part of service science. In this study, for G2B electronic commerce service composed of information systems and human resources, a composite research model for exploring factors of service quality satisfaction is proposed. The proposed model uses SERVQUAL’s five quality dimensions as independent antecedent factors and usefulness and ease-of-use of the technology acceptance model as mediating factors. A case of a G2B purchase service is empirically studied using the proposed model. The result shows that the proposed composite model is good and appropriate for explaining the characteristics of G2B services.
4,000원
23.
2012.12
구독 인증기관 무료, 개인회원 유료
Because the difference between products and services are getting less and less, service and manufacturing companies’ efforts are increasingly focused on utilizing services to satisfy customers’ needs under today’s competitive market environment. The value of services depends on service reliability that is identified by satisfaction derived from the relationship between customer needs and service providers. In this paper, we extend concepts from the fault tree analysis for reliability analysis of tangible systems to services. We use an event-based process model to facilitate service design and represent the relationships between functions and failures in a service. The objective of this research is to propose a method for evaluating service reliability based on service processes using service blueprint and FTA. We can identify the failure mode of service in a service delivery process with a service blueprint. The fuzzy membership function is used to characterize the probability of failure based on linguistic terms. FTA is employed to estimate the reliability of service delivery processes with risk factors that are represented as potential failure causes. To demonstrate implementation of the proposed method, we use a case study involving a typical automotive service operation.
4,000원
24.
2012.12
구독 인증기관 무료, 개인회원 유료
This study was analyzed based on the core competencies that Small Giant enterprises to foster the goals of growth of SMEs mid-sized businesses rather than Global Small Giant enterprises of the business model for a causal relationship. As the result, the average age, sales and number of employees of Korean small giants were 20.6 years, 148.8 billion won and 312.1. This research investigated that Korean small giants were realizing the sustainable growth with the firm shares in the target markets, based on added values in groups and technical powers, although their average age is one third younger than global small giants. The further research needs to develop and select small giants more precisely and strictly. It is expected that small giants will be new growth engines to improve global competitiveness of Korea
4,000원
25.
2012.12
구독 인증기관 무료, 개인회원 유료
We analyzed the effect of inventory pooling on the system where multiple depot was used to replenish retailers and where inventories are kept only on the depots. Inventory pooling consists of inventory integration and inventory exchange. We used simulation for checking the cost saving effect of reducing the number of depot (Inventory Integration) for the case when inventories kept on every depots are commonly used for all retailers when certain depot have stockَout for their retailer assigned to them (Inventory Exchange) with the constraint of service level. Simulation on wide range of parameter settings results show that cost saving effect from inventory integration diminishes when transportation cost between depot and retailers or stockَout cost, or retailer number increases. The effect becomes stronger when the demands on retailers have bigger variance or average. Also the results show that the cost saving effect from inventory exchange becomes stronger on the same situation when inventory integration effect becomes stronger.
4,000원
26.
2012.12
구독 인증기관 무료, 개인회원 유료
Recently real-estate investment business is standing out as a new plan for creation of source of income. In this paper, we suggested appropriate real-estate investment strategy through the reconstruct case study of existing one-storied building. That is, we showed the efficient process of decision and propel to reconstruct and the key points for lease business and post management after building completion. Also, we analyzed the rate of return of commercial building investment in order to find its optimum dealing time. Therefore the results of this paper are expected to be a help to old ages and persons laying plans for a similar business.
4,000원
27.
2012.12
구독 인증기관 무료, 개인회원 유료
In this study, the masking effect of olfactory stimulus on the awakening state due to sound stimuli while driving using Graphic Driving Simulator was observed through the response of autonomic nervous system. The test was conducted for 11 males in their twenties. The siren of ambulance car was presented to them as auditory stimulus for 30 secs while driving in a situation of high way in the condition of both peppermint and control, respectively, and LF/HF ratio of HRV (Heart Rate Variability), the activity index of sympathetic nerve, and GSR (Galvanic Skin Response) response were examined. The test was proceeded in the order of three stages, that is, sound stimuli (test 1), driving performance, and sound stimuli (test 2), and fragrance stimulus, driving performance, and sound stimuli (test 3), and the physiological signal of GSR, HRV was measured in the whole stages. As a result of test, comparing the results of before and after auditory stimulus test (1) (p < 0.01), test (2) (p < 0.05), and test (3) (p <0.01), driving performance test (2) (p < 0.01), test (3) (p < 0.01), and olfactory stimulus test (3) (p < 0.05), respectively, GSR response increased, showing significant difference in all the tests. It indicates that when auditory stimulus was presented to the subjects, they were in the awakening state as sympathetic nervous system got activated. As a result of comparing auditory stimulus while driving before and after presenting olfactory stimulus, there was no significant difference in GSR response. The LF/HF ratio of HRV increased, showing a significant difference only in test (2) (p < 0.05), and in driving performance test (2) (p < 0.05) in auditory stimulus, however, it showed no significant difference in olfactory stimulus. As a result of comparing auditory stimulus while driving before and after presenting olfactory stimulus, there was a decrease, showing significant difference (p < 0.05) in LF/HF ratio of HRV. That is, it means that the activation of sympathetic nervous system decreased, and that parasympathetic nervous system got activated. From these results, it was observed that while driving, the awakening level due to auditory stimulus was settled with olfactory stimulus. In conclusion, it was drawn that while driving, olfactory stimulus could have the masking effect on auditory stimulus.
4,000원
28.
2012.12
구독 인증기관 무료, 개인회원 유료
The Voronoi diagram of spheres and power diagram have been known as powerful tools to analyze spatial characteristics of weighted points, and these structures have variety range of applications including molecular spatial structure analysis, location based optimization, architectural design, etc. Due to the fact that both diagrams are based on different distance metrics, one has better usability than another depending on application problems. In this paper, we compare these diagrams in various situations from the user’s viewpoint, and show the Voronoi diagram of spheres is more effective in the problems based on the Euclidean distance metric such as nearest neighbor search, path bottleneck locating, and internal void finding.
4,000원
29.
2012.12
구독 인증기관 무료, 개인회원 유료
F-Measure is one of the external measures for evaluating the validity of clustering results. Though it has clear advantages over other widely used external measures such as Purity and Entropy, F-Measure has inherently been less sensitive than other validity measures. This insensitivity owes to the definition of F-Measure that counts only most influential portions. In this research, we present Fn-Measure, an external cluster evaluation measure based on F-Measure. Fn-Measure is so sensitive that it can detect their difference in the cases that F-Measure cannot detect the difference in clustering results. We compare Fn-Measure to F-Measure for a few clustering results and show which measure draws better result based upon homogeneity and completeness
4,000원
1
2
