In this study, compare the results that used period of an object building and a structural analysis program in order to to analyze the effect that a slab element to oppose a vertical load opposes to lateral loading of a structure. Compared with to analyze the results to the Diaphragm which is existing analysis and a way do modeling to an plate element to slab element of RC wall type structures to give a change of rigidity with 100%, 50%, 30%

In this study, a shear wall-slab damper system for seismic retrofitting of existing low-rise school buildings was proposed. The proposed system is to control the earthquake-induced vibration of the existing building structures using the energy dissipation effect of hysteretic damper inserted between the extended shear wall and existing moment frame. The numerical analyses were performed to investigate the vibration control efficiency of the shear wall-slab damper system and to identify the range of optimal yielding strength of the slab damper. In addition, variation of shear force of the extended shear wall with regard to the yield strength of the dampers in a range from 10 to 100 percent of the maximum base shear force of the retrofitted structure was investigated. The numerical analyses results showed that the maximum displacement of the structures with the slab damper whose yield strength is equal to 20 percent of the maximum base shear. On top of that, the slab damper system reduced the shear force of the shear wall by about 50 percent in comparison with the existing frame-shear wall system with rigid diaphragm slabs.

Modular construction uses pre-fabricated volumetric units that are transported and installed on site as fitted-out and serviced 'building blocks'. The use of modular construction is directly influenced by the client's requirements for speed of construction, quality, reuse and benefits of economy. These benefits may be maximized under the condition that modules are almost manufactured in factory and transported to the site without any damages. In Korea, some damaged modules were reported on the process of transportation. This paper quantifies the vibration performances of modular units under transportation by analytical and experimental methods. Quantified vibration performances are reflected to the transportation guide of modular units.

Designers have to consider voice of customer, process capability, manufacturing standards & condition, manufacturing method and characteristics of products to decide tolerances. Especially, in case of position of hole and pin, designers have to consider process capability to decide tolerances. The traditional position tolerances used in a drawing are theoretical values which are allocated to position under the worst case assembling condition that both hole and pin are the maximum material condition(MMC). However, when the process capability is high, more exact product size can be produced under stable manufacturing condition. Larger clearance of hole and pin can be allocated. In this point of view, manufacturer could increase the yield by allocating larger position tolerance than theoretical position tolerance of hole and pin considering process capability.

In this study, the seismic performance of RC school buildings which were not designed according to earthquake-resistance design code were evaluated by using response spectrum and push-over analyses. From the results of analysis, the efficiency of the seismic retrofitting methods RC shear wall, steel frame, RC frame and PC wing wall for existing RC school buildings was evaluated and analysised. The analysis result indicate that the inter-story drift concentrated in the first floor and most plastic hinge forms in the column of the first story. And results of analysis of the efficiency of the seismic retrofitting indicate that inter-story drift significantly reduced and ductile behavior is expected.

In this study, the structural stability of stone pagoda in Korea is evaluated with regard to the contact characteristics between stone blocks and a method for restoring the static stability of the stone pagoda by increasing the friction coefficient between stone blocks are proposed. Existing steel insertions, which are used for a temporary retrofitting method, bring about not only decoloration on the surface due to its corrosion but also stress concentration in stone blocks which may end up fracturing blocks. In order to replace the stiff insertions such as iron with ductile materials, lead or tin, experirnental test is conducted for identifying the friction characteristics of stone blocks without/with various types of insertions and the results indicated that a ductile compound metal insertion brought about the increase of the friction coefficients when compared to the existing iron insertion.

Since the school buildings are generally used as public shelters when the natural disasters such as flood and earthquake occur, it must be designed to show enough structural performance when subject to earthquake. Major failure mode of the school buildings observed in past earthquakes were shear failure of column of which length is shortened by infilled masonry blocks. ln this study, the seismic risk of the reinforced concrete school building structure was evaluated by using the seismic performance evaluation methods of low-story RC structures developed in Japan and the required seismic performance index which is obtained according to the KBC2008 seismic hazard map and soil types. ln this paper, the seismic performance of the school building is evaluated by considering this short-column effects, building shape and deterioration.

The purpose of this study was to investigate the preventive effects of Paeoniae Radix Extract (PRE) against the acute hepatotoxicity-inducing lipopolysaccharide (LPS) in the liver. PRE of 100 mg/kg concentration was intraperitoneally administered into rats at dose of 1.5 ml/kg for 20 days. On day 21, 5 mg/kg of LPS dissolved in saline was injected 4 hours before anesthetization. We examined the levels of glutamate oxaloacetate transaminase (GOT), glutamate pyruvate transaminase (GPT), lactate dehydrogenase (LDH) in serum of rats, superoxide dismutase (SOD) in mitochondrial fractions, and malondialdehyde (MDA), catalase (CAT), glutathione peroxidase (GPx) in liver homogenates. LPS-treatment markedly increased the levels of GOT, GPT, LDH and MDA, and significantly decreased those of SOD, CAT and GPx. But PRE-pretreatment decreased the levels of GOT, GPT, LDH and MDA, by 59.7%, 43.6%, 59.6% and 63.5%, respectively and increased those of SOD, CAT and GPx, by 85.5%, 57.8% and 62.9%, respectively. These results showed that the PRE had the preventive effects against the acute hepatotoxicityinducing LPS in the liver .

This paper focused on the application of finite element model updating technique to evaluate the structural properties of the reinforced concrete specimen using the data collected from shaking table tests. The specimen was subjected to six El Centro(NS, 1942) ground motion histories with different Peak Ground Acceleration(PGA) ranging from 0.06g to 0.50g. For model updating, flexural stiffness values of structural members(walls and slabs) were chosen as the updating parameters so that the converged results have direct physical interpretations. Initial values for finite element model were determined from the member dimensions and material properties. Frequency response functions(i.e. transfer functions), natural frequencies and mode shapes were obtained using the acceleration measurement at each floor and given ground acceleration history. The weighting factors were used to account for the relative confidence in different types of inputs for updating(i.e. transfer function and natural frequencies). The constraints based on upper/lower bound of parameters and sensitivity-based constraints were implemented to the updating procedure in this study using standard bounded variable least-squares(BVLS) method. The veracity of the updated finite element model was investigated by comparing the predicted and measured responses. The results indicated that the updated model replicates the dynamic behavior of the specimens reasonably well. At each stage of shaking, severity of damage that results from cracking of the reinforced concrete member was quantified from the updated parameters(i.e. flexural stiffness values).

LCVA has an advantage that its natural frequency can be easily controlled by changing the area ratio of the vertical column and horizontal part. The previous studies investigated the dynamic characteristics of the LCVA under harmonic load. This study experimentally obtained the first and second mode natural frequencies of the LCVA from shaking table tests using white noise and compared the values with the ones by previous study. Test results show that the measured first mode natural frequency of the LCVA is larger than the calculated one when the area ratio is larger than 1. The second mode frequency increases with the increasing area ratio, which is due to the sloshing motion effect resulting from the large area of the vertical column.

A bi-axial tuned liquid mass damper(TLMD) was proposed and evaluated on its control performance. The proposed TLMD controls structural response in a specific one direction by using the liquid sloshing of TLCD. Also, the TLMD controls structural response in the other orthogonal direction by TMD behavior which mass consists of the container itself and liquid within container of TLCD installed on linear motion guides. Force-vibration tests on a real-sized structure with the TLMD were performed to verify its independent behavior in two orthogonal directions. Test results showed that the responses of a structure were considerably reduced by using the proposed TLMD and its usefulness for structural control in two orthogonal directions.