검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 249

        41.
        2020.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 생체모방형 비대칭 분리막 제조방법인 사각펄스양극산화법의 비대칭성 한계를 극복하기 위해 최근 보고된 셀렌산 전해액을 이용하고 표면개질에 따른 정류특성을 평가하였다. 분리막의 비대칭 원뿔형 채널은 최소직경이 10 nm이고 최대직경이 50 nm이며 길이가 5 μm이었다. 분리막의 정류특성은 기존 황산 전해액에서 제작된 것보다 높았으며 +1 V에서의 전류가 -1 V일 때보다 최대 2.9배를 나타내었다. 또한, 실란화 반응을 이용한 표면개질을 통해 술폰산기를 도입한 분리막은 반대로 -1 V에서의 전류가 +1 V일 때보다 전류의 최대 4.2배인 정류특성을 나타냈다. 실험에 대한 이론적 증명은 2D 모델에 수치해석 결과를 제시함으로써 뒷받침되었다. 본 연구의 결과는 서로 다른 정류방향을 갖는 두 종류의 이온 정류 분리막을 손쉽게 제작할 수 있는 방법을 제시하며 이온의 이동을 제어하기 위한 다양한 연구 분야에 활용될 수 있을 것으로 기대된다.
        4,000원
        42.
        2020.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study is to investigate the cause of the malfunction of the ground tracked combat vehicle rotating roller and set future direction of improvement. The integrity of the initially used plate and rotating roller was evaluated. As evaluation methods, mechanical property test, radiographic test and size checking test were performed. PA66, PA12, PET, and POM were selected among polymer materials and tested for water absorption rates. Through mechanical property test and radiographic test, the materials used initially were identified to be sound. In the evaluation of the selected four polymer materials, it was confirmed that the PET was excellent in the mechanical properties and the water absorption rate. PET is excellent in mechanical properties and water absorption.
        4,000원
        43.
        2020.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        스마트 온실은 주로 파프리카, 토마토, 딸기와 같은 과채류 작물을 대상으로 보급되었다. 스마트 온실의 보급량은 지속적으로 증가하고 있지만, 그 실태에 대한 조사는 부족하다. 그러므로, 이번 연구를 통해 한국의 스마트 온실의 시설 규모, 재배작물, 재배방법, 발생 병해충과 실사용자의 평가를 중심으로 한 현 실태를 파악하고자 하였다. 스마트 온실의 리스트는 각 권역별 현장지원센터로부터 제공받았으며, 모든 조사는 농가를 직접 방문하여 수행되었다. 조사된 스마트 온실 농가의 약 50%가 3,300 m2~6,600 m2사이의 규모로 운영하고 있었다. 조사된 농가 중 97.1% 가 화학적 방법을 이용해 병해충을 방제하고 있었다. 조사된 농가에서 응답한 주요 식물병은 흰가루병과 잿빛곰팡이병으로 각각 54.4%, 33.8% 비율로 주로 문제가 되는 식물병이라고 응답하였다. 모든 토마토 농가에서 가루이류가 가장 문제가 되는 해충이라고 응답하였다. 그러나, 파프리카 농가의 76.5%, 70.6%가 총채벌레류와 진딧물류를 가장 문제가 된다고 응답하였다. 스마트 온실에 대한 사용자의 만족도는 10점 만점에 평균 7.5점이었다. 이 결과는 한국의 현재 스마트 온실을 관리하고 미래 스마트 온실을 설계하는 계획을 세우는 데 도움이 될 것이라 생각된다.
        4,000원
        44.
        2020.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        2016년 3월 6.67톤 어선이 크레인 작업을 하던 중 복원성 상실로 인한 전복 사고가 발생하였다. 전복은 충돌, 접촉, 좌초, 화재 및 폭발의 결과로 발생한 사고는 제외하고 선박이 뒤집힌 것을 말한다. 지난 9년동안(2010-2018), 전복 사고는 전체 해양사고의 2.34%를 차 지하고 있으며 증가와 감소를 반복하고 있다. 10톤 미만 소형어선의 주된 전복사고 원인은 부적절한 선적에 따른 복원성 상실이다. 어선 법에 따르면 소형 어선은 복원성과 1톤 미만 제한 하중 크레인에 대해서 복원성과 예비검사를 면제해 주고 있다. 본 연구는 고성에서 발 생한 소형 어선의 전복 사고 재결서의 원인으로 언급된 사항 중 크레인 증량에 따른 복원 모멘트 감소에 대해 실제 제원이 비슷한 어선 을 모델링하여 이를 통해 사고 전·후의 어선 상태를 가상하여 복원성을 비교하였다. 그 결과 기존 보다 무거운 크레인으로의 교체 시에는 복원 모멘트 감소와 현단몰입각의 감소로 전복의 위험성이 증가되었다. 표준재화 상태에서는 입·출항시 보다는 어로 활동을 하고 있는 상황에서의 복원 모멘트가 감소되는 것을 확인하였다.
        4,000원
        45.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        1. 미소 해충의 자동 영상 인지 시스템 개발에 필요한 기초 자료를 확보하기 위해 화질에 따른 해충의 인지율을 조사하였다. 2. 곤충 영상은 스캐너를 이용하여 300, 600, 900, 1,200, 2,400, 4,800 dpi의 6단계 화질로 획득하였고 곤충 연구자에게 화질에 따른 인지율을 설문 조사하였다. 3. 나방류인 담배거세미나방과 배추좀나방의 경우 모든 dpi 에서 높은 인지율을 보였다. 4. 크기가 작은 포인세티아총채벌레와 담배가루이의 경우 모든 dpi에서 50% 미만의 낮은 인지율을 보였다. 5. 크기가 작은 총채벌레와 담배가루이 인지 시스템 개발에는 100 mm 매크로렌즈를 사용하거나 hand-held 형태의 디지털 현미경이 필요할 것으로 사료된다.
        3,000원
        46.
        2019.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Basaloid squamous cell carcinoma (BSCC) is a rare and aggressive variant of squamous cell carcinoma arising in various anatomical sites. This article describes a case history of BSCC of the floor of mouth with mandibular involvement, and further discusses the appropriate management of such case with reference to the literature review. A 52-year-old male patient was referred to our clinic from another university hospital. Segmental mandibulectomy with supraomohyoid neck dissection and mandible reconstruction with left fibular free flap under general anesthesia was performed, followed by radiotherapy. Histopathological examination on the tumor lesion revealed features of squamous cell carcinoma with comedo-type necrosis. A diagnosis of BSCC was given by the oral pathology specialist. Basaloid squamous cell carcinoma (BSCC) is a biphasic variant of SCC with both basaloid and squamous cell histology. A recent report showed that there is no significant difference in the prognosis. Due to the lack of accumulated research, close follow-up and continuous research are deemed necessary. Treatment that focuses on the stage of the tumor is appropriate. A periodic follow-up observation is also very important due to the occurrence of distant metastasis to the lungs.
        4,000원
        47.
        2019.09 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 원자력 사고 또는 방사선 비상 시 지표면에 침적될 수 있는 감마선방출 핵종의 방사능을 신속하게 평가하기 위해 이용될 수 있는 NaI(Tl), LaBr3(Ce) 및 CeBr3 섬광검출기의 성능을 비교 평가하였다. 검출성능은 최소검출가능방사능 (MDA, Minimum Detectable Activity)을 통해 평가하였으며, 각 검출기의 지표면 침적 감마선방출 핵종에 대한 검출효율은 수학적 모델링과 점선원을 이용하여 반실험적으로 산출하였다. MDA 평가를 위한 백그라운드 감마선에너지스펙트럼은 비교적 넓고 평탄한 초지에서 측정되었으며, 원자력 사고 시 방출될 수 있는 주요 핵종에 대한 각 검출기의 MDA를 산출하였다. 그 결과 일반 환경방사능 준위에서 지표면 침적 감마핵종에 대한 각 검출기의 MDA 크기는 대체로“NaI(Tl)> LaBr3(Ce)> CeBr3”로 평가되었으며, 백그라운드 준위가 유사한 에너지 영역에서는 분해능이 가장 우수한 LaBr3(Ce)에서 최소 값을 보였다. 이는 관심 핵종의 감마선에너지 영역에 대한 각 검출기의 자체 및 측정 환경 백그라운드, 측정 효율, 그리고 에너지 분해능 특성을 바탕으로 비교 분석되었다.
        4,000원
        48.
        2019.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        노린재목(Hemiptera) 가루이과(Aleyrodidae)에 속하는 담배가루이(Bemisia tabaci Gennadius)는 전 세계적으로 900종 이상의 다양한 작물에 경제적 피해를 주고 있는 주요 해충이다. 특히 이 중 담배가루이 JpL (Lonicera japonica)은 현재까지 일본과 한국에서만 서식하는 종으로 보고되어 있으며, 주로 인동덩굴(Lonicera japonica) 및 일부 식물 종에만 서식하는 것으로 알려져 있다. 본 연구는 2019년 제주도 지역 담배가루 이 JpL의 발생 현황 및 확산 정도를 확인하기 위하여 수행되었으며, 총 25개 채집지역 중 24개 지역의 인동덩굴 및 1개 지역의 큰망초(Conyzasumatrensis)에서 담배가루이 JpL 성충 1,003개체를 채집하였다. 채집된 담배가루이 성충의 유전자 염기서열을 분석한 결과, 분석된 모든 담배가루이는 JpL로 확인되었으며, 본 연구의 결과 담배가루이 JpL의 개체수는 이전에 국내에서 보고된 이후 현재까지 매우 빠른 속도로 증가하고 있음을 확인하였다.
        4,000원
        49.
        2019.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In order to develop the compatible damping device in various vibration source, a hybrid wall-type damper combining slit and friction damper in parallel was developed. Cyclic loading tests and two-story RC reinforced frame tests were performed for structural performance verification. As a result of the 5-cyclic loading test according to KBC-2016 and low displacement cyclic fatigue test, The hybrid wall type damper increased its strength and the ductility was the same as that of the slit damper. In addition, As a result of the two-layer frame test, the reinforced frame had about twice the strength of the unreinforced frame, and the story drift ratio was satisfied to Life Safety Level.
        4,000원
        51.
        2019.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Most of the variable shading devices are installed outdoors, so they are greatly affected by structural safety due to external climate change, wind, rain, and snow. Especially, due to strong wind such as typhoons, safety problems may occur due to the dropout of the device. Therefore, it is necessary to secure the structural safety against the wind. Therefore, it is necessary to analyze the structural behavior of the windshield to evaluate the structural safety of the variable sunshade device. In this study, we analyze the wind pressure applied to the shading material according to the change of the length of the variable shading device, and apply it to the calculation of the wind load for the structural design of the variable shading device. The CFD (Computational Fluid Dynamic) analysis of the structure of the sample was used to analyze wind pressure magnitude and distribution. In order to estimate the wind pressure, the maximum wind loads of the static and negative pressures acting on the structure were analyzed from numerical simulation results.
        4,000원
        54.
        2019.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Background: Mucoepidermoid carcinoma (MEC) is the most common malignant epithelial tumor of the salivary gland in the oral cavity. In South Korea, it occurs most frequently in the palate, retromolar area, floor of the mouth, buccal mucosa, and other areas of the oral cavity. MEC is rare in children and adolescents under 20 years of age, but it is the most common malignant salivary gland tumor in this group. Reconstructive surgery is often required due to cystic lesions or resection of malignancy in the oral cavity. Buccal fat pad (BFP) is a flap that is reliable and suitable for reconstructing oral defects because it has a low complication rate and small volume change over time. Case Presentation: We report the case of a 12-year-old female patient with low-grade MEC on light soft palate with no neck metastasis. After tumor resection the palatal mucosal defect was reconstructed with a BFP flap. Conclusion: The purpose of this article is to discuss the features and treatment methods of MEC that is rarely occurring in children, and the usefulness of BFP for reconstruction. Therefore, we will make a precise diagnosis and treatment as we examine the clinical feature and review the literature.
        4,000원
        56.
        2018.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, the seismic performance and behavior characteristics of the upper truss structure of the large stadium are analyzed by nonlinear dynamic analysis. In the nonlinear dynamic analysis, the earthquake records were generated by site response analysis to simulate the nonlinear behavior of the relevant soil condition where the structure is located. Nonlinear dynamic analysis was performed using Perform-3D and the nonlinear properties of the substructure and the superstructure were determined in accordance with KISTEC guideline. According to the analysis results, excessive deformation occurred in the upper truss element, and plastic hinges exceeded the target performance in some members. Buckling-restrained brace is used for seismic retrofit of stadium structures and the analysis results shows the interstory drift satisfies the target performance level with dissipating the seismic energy efficiently.
        4,000원
        57.
        2018.10 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        This study examines the effect of microstructural factors on the strength and deformability of ferrite-pearlite steels. Six kinds of ferrite-pearlite steel specimens are fabricated with the addition of different amounst of Mn and V and with varying the isothermal transformation temperature. The Mn steel specimen with a highest Mn content has the highest pearlite volume fraction because Mn addition inhibits the formation of ferrite. The V steel specimen with a highest V content has the finest ferrite grain size and lowest pearlite volume fraction because a large amount of ferrite forms in fine austenite grain boundaries that are generated by the pinning effect of many VC precipitates. On the other hand, the room-temperature tensile test results show that the V steel specimen has a longer yield point elongation than other specimens due to the highest ferrite volume fraction. The V specimen has the highest yield strength because of a larger amount of VC precipitates and grain refinement strengthening, while the Mn specimen has the highest tensile strength because the highest pearlite volume fraction largely enhances work hardening. Furthermore, the tensile strength increases with a higher transformation temperature because increasing the precipitate fraction with a higher transformation temperature improves work hardening. The results reveal that an increasing transformation temperature decreases the yield ratio. Meanwhile, the yield ratio decreases with an increasing ferrite grain size because ferrite grain size refinement largely increases the yield strength. However, the uniform elongation shows no significant changes of the microstructural factors.
        4,000원
        59.
        2018.05 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In order for the probe to perform ocean exploration and survey research, it is necessary to adjust the position of the ship as desired by dynamic positioning system. The dynamic positioning system of T/S NARA is applied to K-POS dynamic positioning system of Kongsberg, which makes maintaining the ship's position, changing position and heading control possible. T/S NARA is not capable of dynamic positioning if one or more propulsive forces are lost with DP Level One. However, it is predicted that dynamic positioning can be achieved even at the time of missing one thrust in a good sea condition. Therefore, we want to analyze the effect of each propulsion on the performance of dynamic position system. When one of the bow thruster and azimuth thrusters lost their propulsion, maintaining the ship's position, changing position and heading control performance were compared and analyzed. If the situation occurred disable from using the bow thruster, they can not maintain ship's position. Azimuth thruster was influential for the ship's position control and bow thruster was influential in heading control. The excellent dynamic positioning performance can be achieved, considering the propulsion power that will have a impact on each situation in the future.
        4,000원
        60.
        2017.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study develops a new hybrid passive energy dissipation device for seismic rehabilitation of an existing structure. The device is composed of a friction damper combined with a steel plate with vertical slits as a hysteretic damper. Analytical model is developed for the device, and the capacity of the hybrid device to satisfy a given target performance is determined based on the ASCE/SEI 7-10 process. The effect of the device is verified by nonlinear dynamic analyses using seven earthquake records. The analysis results show that the dissipated inelastic energy is concentrated on the hybrid damper and the maximum interstory drift of the SMRF with damping system satisfies the requirement of the current code.
        4,000원
        1 2 3 4 5