Airborne bacteria are expected to float in the mushroom cultivation house, as it is a special environment with high humidity and high temperatures. Their concentration and diversity in the indoor air of the cultivation house could effect the health of farmers and the quality of mushrooms. To examine whether microbiota of airborne bacteria change from year to year, we measured the indoor temperature, humidity, and airborne bacterial concentration from mushroom cultivation houses located in six regions in Korea from 2020 to 2021, and isolated and identified airborne bacteria. The surveyed data were compared and the bacterial diversity of the 1st year and the 2nd year were determined. Based on the average temperature and humidity data surveyed, it can be seen that the temperature and humidity environment in the cultivation houses is such that bacteria can easily reproduce. It was observed that the temperature inside the cultivation houses tends to be higher or lower depending on the season and correlates with the temperature outside the cultivation houses. In the first year survey, 32 species of 20 genera were identified, and in the second year survey, bacteria belonging to 29 species of 22 genera were identified. Among them, the most detected species were all species belonging to the genus Bacillus. There were only three species (Bacillus altitudinis, Brevibacterium frigoritolerans, and Staphylococcus epidermidis) that were continuously isolated in common. Our results showed that the species of floating bacteria greatly vary from year to year even for the same cultivation houses.

Temperature, humidity, and fungal concentration were investigated during the period from May 2019 to August 2021 to obtain information on the indoor air quality in the facilities of the National Archive of Koea, located at Seongnam, Daejeon, and Busan, respectively. The temperature and humidity of the undisinfected libraries was properly maintained for the preservation of papepr records. The airborne fungal concentration differed among the libraries, changed according to the season, and increased especially between June and August. Similarily, the concentration of airborne fungi in the hallways adjacent to the libraries also fluctuated depending on the season and showed a tendency to rise in the months when the ourside temperature rose. In general, the concentration of airborne fungi in the hallways was somewhat higher than that of the libraries. Importantly, it was identified that the concentration of airborne fungi exceeded the recommended standard (500 CFU/m3) by the Ministry of Environment of Korea only in the workroom where the classification and condition inspection of undisinfected records imported from outside were performed. Investigation of airborne fungal concentration from May 2021 to August 2021 showed that the 24 undisinfected libraries in Seongnam, Daejeon, and Busan were all good at 100 CFU/m3 or less. The results of this study are expected to be used as basic data to manage the indoor environment of facilities in the National Archives.

This study was conducted to help manage total floating bacteria and fungi in the indoor air by studying the characteristics of total floating bacteria and fungi according to the indoor CO2 concentration of daycare centers. The sampling and analysis of samples was based on the indoor air quality process test method, and the result analysis was conducted using the SPSS statistical program to perform correlation and regression analysis. Correlation and regression results show that CO2 and total airborne bacteria showed positive relationships, but airborne mold did not show relevance. In addition, in order to identify factors affecting airborne mold, correlation analysis and regression analysis were performed regarding total airborne bacteria, PM10, PM2.5, HCHO, outdoor mold, I/O ratio, indoor temperature/ humidity, area per classroom and volume. The results showed that the factors affecting airborne mold were I/O ratio, outdoor airborne mold, and total airborne bacteria. Research results show that CO2 and total airborne bacteria can be reduced and controlled by natural ventilation, and in the case of airborne mold, mechanical forced ventilation such as hoods will be necessary due to the introduction of outdoor airborne mold. In addition, it is necessary to consider I/O ratio criteria in order to confirm effective indoor mold contamination, taking into account the effect of outdoor mold inflow.

To obtain information on the indoor air quality of un-disinfected libraries used for paper records preservation, temperature, humidity, and bacterial concentration and species were investigated at five un-disinfected libraries from May to September in 2019 in the National Archives, Seoul (Nara Repository), Korea. Temperature and humidity of all the five un-disinfected libraries were well maintained at 18-22oC and 40-55% in compliance with the National Archives Paper Records Preservation Environment Standard. Bacterial concentration ranged from 2 CFU/m3 up to 280 CFU/m3 which were lower than the Korean indoor air quality standard value. A total of 68 bacterial species belonging to 33 genera were identified from indoor air of the five un-disinfected libraries. Among the 33 genera, Bacillus, Micrococcus, and Staphylococcus were the major genera. Only Micrococcus yunnanensis, Roseomonas mucosa, and Moraxella osloensis were commonly found among the five un-disinfected libraries. Bacterial species producing colonies with color on TSA media were present. Among the 68 species, Bacillus circulans and B. megaterium known to produce cellulases were found. There were also 17 species which have harmful effect on human health. The results of this study indicate that continuous monitoring of air borne bacteria is necessary in the un-disinfected libraries used for paper records preservation.

LMU(Leg Mating Unit)는 해양구조물의 플로트오버 실치에서 활용되는 장비 중 하나로 충격을 흡수하는 부분과 결합부로 구성된다. 본 연구에서는 최적설계를 통해 부유식 해양구조물의 플로트오버 설치용 LMU의 성능을 개선하여 설계 요구 조건을 만족하는 설계를 개발하였다. 초기설계는 고정식 해양구조물의 플로트오버 설치용으로 개발된 것의 제원을 참조하였으며, 초탄성재료의 거동을 표현하기 위해 Mooney-Rivlin 모델을 활용하였다. 설계민감도해석 결과를 바탕으로 중요도에 따라 설계 변수들을 선별하였고, 진화 알고리듬 기반 최적설계를 수행하였다. 최적설계 문제에서 목적함수는 LMU의 중량이며, 제약 조건은 LMU에 작용하는 최대 폰-미세스 응력과 LMU의 성능을 평가할 수 있는 반발력이다.

This study examines the effects of surrounding outdoor environmental characteristics in multi-use public facilities that are used by the susceptible population, on the concentration and distribution of indoor airborne bacteria. For this study, areas were divided into ‘factory area,’ ‘city area,’ and ‘forest area.’ The research was conducted from October 2017 to April 2018, and the selected target facilities were daycare centers, hospitals, postpartum care centers, and nursing homes for the elderly. In order to measure airborne bacteria, indoor air samples were collected using a six-stage viable particulate cascade impactor, and airborne bacteria samples were collected using MCE (Mixed cellulose esters) filters. Moreover, the outdoor airborne bacteria concentration was also measured to determine the concentration ratio (I/O ratio) of the total indoor airborne bacteria and total outdoor airborne bacteria concentrations. The results showed that the total outdoor airborne bacteria concentration was highest in the city area, with 74.2 ± 60.0 CFU/m3, and the lowest in the factory area, with 45.9 ± 35.8 CFU/m3. Furthermore, the distribution of the total outdoor airborne bacteria concentrations significantly differed across each surrounding environment (p < 0.05). On the other hand, no statistically significant difference in total indoor airborne bacteria concentrations, according to surrounding environments, was observed (p > 0.05). These findings suggest that the concentration of outdoor airborne bacteria differs across surrounding environments, unlike that of the indoor airborne bacteria.

최근 환경규제가 강화됨에 따라 액화천연가스(Liquefied Natural Gas)를 이용하여 전력을 생산해내는 신규발전설비인 부유식 LNG 발전설비(floating LNG power plant)가 개발되고 있다. 부유식 LNG 발전설비는 운용 시 증발가스가 발생하고 이를 제거하거나 회수할 수 있는 시스템의 설계가 필요하다. 그러나 해양플랜트는 해상요건에 따라 설계가 상이하고, 부유식 LNG 발전설비의 설계 전 시행착오를 줄이기 위해 지속적으로 수정이 가능한 BOG 회수시스템 공정모사 모델이 필요하다. 따라서 본 연구에서는 상용공정시뮬레이션 프로그램을 통해 부유식 LNG 발전설비에 적합한 모델을 모델링하고자 냉매사용 유무에 따라 서로 다른 BOG(Boil-Off Gas) 회수시스템을 모델링하여 BOG의 회수율과 액화점을 비교 및 분석하였으며, 그 결과 질소냉매를 사용한 BOG 회수시스템 모델을 부유식 LNG 발전설비용 BOG 회수시스템 모델로 제안하고자 한다.

Mold is one of the harmful biological pollutants in the indoor environment. To investigate how the contamination degree of mold existing in the indoor environment differs according to the characteristics of the house, the concentration of mold in the indoor air was investigated for the houses damaged by leakage or flooding. As a result of a survey of 20 houses located in Gyeonggi-do and Chungcheong-do, the concentration of mold in indoor air surprisingly exceeded more than two times the recommended indoor air quality standard of 500 CFU/m3 in all the houses investigated. The fungal concentration was high in houses with condensation and mold odors. As for the housing type, the pollution degree was higher in detached houses than in row houses. As for the type of water damage, mold contamination was higher in the leaky houses than in the flooded houses. The degree of mold concentration was 1,237 CFU/ m3 in the leaky houses. In terms of housing age, pollution was very high in houses over 20 years old. The occurrence of these measured mold concentrations was correlated at a significant level with respect to the properties of the house. This study shows that in the case of water damaged houses, careful management of mold contamination is required.

Indoor air contaminated with various pollutants commonly poses a risk to human health, and the need for installing air purifiers has been increasing. However, in commercial air purifiers pollutants-removal efficiency and durability are generally low. Since silver nano-composites are known to have catalytic oxidation and antibacterial capacities, it was anticipated to be applicable for indoor air purifiers. In this study, silver nano-composites were applied to granular activated carbon and scrubber solutions to treat a mixture of three air pollutants including toluene, formaldehyde, and bioaerosol. In the activated carbon deposited with silver nano-particles, the specific surface area decreased, resulting in a 10% loss of adsorption capacity for toluene. However, the removal efficacy of formaldehyde and bioaerosol increased by 10% due to the catalytic oxidation and antibacterial capacities. In the scrubber operation with silver nano-particles, the removal rates of formaldehyde and bioaerosol improved by 20%, while toluene removal was not observed. When the activated carbon column and the scrubber was connected in series, toluene was mainly removed by the activated carbon, and the removal rates of formaldehyde and bioaerosol increased in the presence of silver nano-particles. Consequently, for the improvement of indoor air quality, it is deemed appropriate to apply silver nano-material to indoor environments contaminated with pollutant mixtures.