검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 2,269

        1921.
        2012.12 KCI 등재 서비스 종료(열람 제한)
        지난 40년간 비디오 게임 산업은 비약적인 발전을 이루었다. 이에 본 연구는 산업조직론을 이론적 분석틀로 이용하여 미국 비디오 게임 산업의 진화를 살펴보았다. 분석 결과 미국 비디오 게임 산업의 시장 구조 및 시장 행위의 역사적 변화를 확인할 수 있었으며, 특히 미국 비디오 게임 산업의 시장구조의 변화와 시장행위의 변화간에 밀접한 연관이 있는 것으로 나타났다. 이와 같은 결과는 비디오 게임 산업에 대한 경제학적 분석을 실시하는 후속 연구에 기초가 될 것으로 여겨진다.
        1922.
        2012.11 KCI 등재 서비스 종료(열람 제한)
        This study aims to develop solidifying agents of sewage sludge using industrial By-Products and evaluate applicability of the solidified sewage sludge. The result of this study shows that it was possible to reduce water content of the cover materials to more than 50% in a short time as a result of the excellent hygroscopic function of inorganic binder made from industrial by-products and the granulation of sludge. The result suggests that the appropriate mixed ratio of (PSA + CPA) − (GBFS + SM1) − (SAS + SM2) is 60-25-15, and input ratio of solidifying agent is 48%, considering the applicability of the facilities, including mixing performance and availability of discharge, as well as the percentage of moisture content of the solidified sewage sludge, pH, and exothermic temperature. The solidified sewage sludge made using industrial by-products met more than the standard of unconfined compressive strength 0.5 kg/cm2 (as for cover materials 0.1 MPa) in 7 days due to ground granulated blast furnace slag, high-calcium fly ash, and SAS. As a result, valid resource recovery is possible through the land treatment of sewage sludge by inducing in-situ stabilization of heavy metals and property strengths through the reactivity of industrial by-products.
        1923.
        2012.11 KCI 등재 서비스 종료(열람 제한)
        Electrochemical reductive extraction of copper from LCD manufacturing process and through hole plating process for PCB circuit board wastewater was experimented using synthetic wastewater. Copper plate which could be used as raw material through melting with extracted copper from wastewater and graphite plate were used as a cathode and an anode, respectively. The copper extraction could be optimized in pH 2 and polar space of 45mm. The extraction rate of copper per unit energy was decreased as HRT increased and initial copper concentration decreased. As the optimal HRTs which could maximize the productivity for copper on energy, 80 ~ 110 min at 50 mg/L, 64 min at 1,000 mg/L and 77 ~ 98 min at 3,000 mg/L were determined, respectively.
        1924.
        2012.11 KCI 등재 서비스 종료(열람 제한)
        Waste dusts generated from various metallurgical processes were investigated for effective management of the designated waste in South Korea. Source of the study were selected based on the industries registered on the Allbarosystem. Raw material, products and manufacturing process were investigated on-site and leaching behavior of six heavy metals (Cr6+, Cd, Cu, Pb, Hg, As) along with CN was studied in 41 waste dust samples. We identified 14 samples exceeded the Korean regulation standard out of which 5 samples were designated waste. We suggest that regular monitoring is essential for the proper management.
        1926.
        2012.09 KCI 등재 서비스 종료(열람 제한)
        This study proposes a self-assessment model and its implementing procedure for the local industry promotion project, the purpose of which is to develop strategies for successful carrying-out of the project by diagnosing carrying capacities of its interested parties. The model, developed principally based on Eckes' Q×A=E Evaluation Model, was applied to 85 project-concerned persons which had been participated in the local industry promotion project from 2009 to 2011. Through the applicability test works of this model, its usefulness and importance for better implementation of the project was ascertained, especially to reflect cultural changes of project actors positively. The actors' recognition level of the project should be one of the critical factors for the successful implementation of the local industry promotion project. So, the higher understanding in the local industry promotion project, the more positive assessment in all respects of the project. Finally, it should be considered that the assessment results might differ for the same assessment standards from assessers' different perspectives.
        1927.
        2012.09 KCI 등재 서비스 종료(열람 제한)
        This study postulates a study model to examine the effect on the local economy revitalization of a selection of local resources, the local innovation capability strengthening, the establishment of promotion system and the creation of revenues for the participant groups of the local industry promotion project. To accomplish study purposes, 169 response samples from 85 project groups which drive the local industry promotion project were verified using SPSS 12.0 and AMOS 5.0. The results showed that firstly, the selection of local resources had a significant effect on the local innovation capability strengthening. Secondly, the local innovation capability strengthening had a significant effect on the establishment of promotion system. Thirdly, the establishment of promotion system had a significant effect on the creation of revenues. Fourthly, the selection of local resources didn't have an effect on the revitalization of local economy. Fifthly, both the local innovation capability strengthening and the establishment of promotion system didn't have an effect on the revitalization of local economy. Sixthly, the creation of revenues had a significant effect on the revitalization of local economy. According to the verifications of study model, the revitalization of local economy is achieved by inducing creation of revenues through the local innovation capability strengthening and the establishment of promotion system after the selection of local resources. From these results, this study presents suggestions, limits of study and directions in the future study.
        1928.
        2012.07 KCI 등재 서비스 종료(열람 제한)
        In this research, we tried to find a solution for problem of urban sewage treatment with coal fly ash and gypsum as industrial wastes. Furthermore, we examine the feasibility of reusing coal fly ash and gypsum which increasing amount of industrial wastes as urban sewage treatment materials and the concern for urban sewage coagulation and adsorption mechanism. The result shows that when 800 mg/L of coal fly ash sintered at 700oC are injected into urban sewage, optimum removal efficiency of CODCr is 87.3%, indicating more 5% improvement than of treating with not sintered condition. The study finds that when 1000 mg/L of gypsum are injected into urban sewage without sintering, optimum removal efficiency of CODCr and turbidity indicate 87.4% and 93.7% respectively.
        1929.
        2012.06 KCI 등재 서비스 종료(열람 제한)
        본 연구는 요트관광산업 활성화를 위한 소비자의 요트관광 선호도와 활성화 방안에 대한 인식도 조사를 통해 요트관광 마케팅 전략수립과 보다 효과적인 요트관광 활성화 방안을 수립하는데 기초자료를 제공하기 위해 수행되었다. 이러한 연구목적을 달성하기 위해 본 연구에서는 B광역시 요트경기장과 해수욕장을 방문한 외부 방문객 및 시민 300명을 조사대상으로 선정해 현장에서 설문조사를 실시하여 다음과 같은 결론을 도출하였다. 첫째, 요트관광 상품 구매의사는 64%로 요트관광 수요는 낙관적이었으며, 지불가능 지출액은 일일기준 10만원 미만인 것으로 나타났다. 둘째, 소비자들의 요트관광에 대한 선호도는 요트체험 및 교육 중심 프로그램으로 주말이나 방학 및 휴가기간을 이용해 당일 또는 1박 2일 요트관광 상품을 선호하고 있었으며 요트관광의 목적은 여가 및 위락 그리고 선호 동행인은 가족 및 친구인 것으로 나타났다. 셋째, 소비자들의 요트관광 제약요인은 요트관광 비용, 시간소비형 관광활동 그리고 다양한 상품의 부재가 주요인이었으며, 선택요인은 관광비용, 연계관광 상품 그리고 요트관광 상품의 질인 것으로 파악되었다. 마지막으로 요트관광 활성화 방안 중에 요트관광 상품의 개발, 기반여건 조성 그리고 마케팅에 대한 중요성이 상대적으로 높게 나타났다.
        1930.
        2012.06 KCI 등재 서비스 종료(열람 제한)
        본 연구의 목적은 방사선의 사업적 이용에 따른 방사선발생장치 또는 방사성동위원소 등(이하 방사성동위원소 등) 을 운용하는 방사선작업종사자를 대상으로 방사선안전관리와 관련된 지식의 설문 조사하고 이를 체계적으로 추이분석함으로서 방사선 이용시설 등의 방사선안전 문화를 정착시키기 위함에 있다. 연구 방법은 2011년 08월 01일 부터 09월 05일 까지 861 명의 방사선 종사자를 대상으로 설문 조사를 하였다. 분석 방법으로 설문 응답자의 일반적인 특성과 기관정보는 빈도 분석을 하였으며 방사선안전관리에 대한 지식 수준은 평균과 표준편차를 구하여 각각 비교하였다. 분석 결과 작업 종사자의 방사선 안전 관리에 대한 지식 조사에서는 종사자 모두 높은 수준으로 평가 되었다. 결론적으로 방사선 작업종사자들의 방사선 안전관리와 관련하여 보다 다양한 요인들에 대한 연구들이 수행되어야 하며 작업종사자들의 의식을 높이기 위해서 시기적절한 교육이 필요할 것으로 사료되며, 지속적으로 방사선 작업종사자들을 관리함으로써 효율적인 방사선이용이 될 수 있는 기반이 확립될 것으로 사료된다
        1933.
        2012.05 서비스 종료(열람 제한)
        To secure the early strength of ternary blended cement mortar, using 3.5% anhydrite with a fineness of approximately 10,000cm2/g, was found to provide the most outstanding early strength properties.
        1934.
        2012.04 KCI 등재 서비스 종료(열람 제한)
        본 연구의 목적은 에너지 산업 부문에서 장기예보의 사회·경제적 가치를 평가하고 측정하는 여러 가지 방법론을 고찰하고 이를 통해 국내의 장기예보 활용에 대한 사회·경제적 가치 평가 연구를 위한 시사점을 도출하는 것이다. 장기예보의 사회·경제적 가치 평가 연구는 방법론에 따라 크게 4가지 즉, 의사결정 분석 모형, 기술적 의사결정 분석, 프로토타입 의사결정 모형, 규범적 시장 모형으로 구분할 수 있으며, 각 유형별로 세부적인 가치 평가 모델과 알고리즘이 다르게 구성된다. 에너지 산업 부문의 사례 연구 검토 결과 개인, 산업 부문, 국가 등 분석 스케일에 따라 적용되는 방법론이 다르게 나타났으며, 사회·경제적 가치에 대한 평가 결과도 연구 대상과 범위에 따라 다르게 나타났다. 따라서 장기예보의 사회 경제적 가치 평가에서 이러한 연구 대상, 스케일에 따라 적합한 분석 방법론을 선택하는 것이 중요하다. 방법론적 고찰은 추상적이고 모호한 장기예보의 영향에 대한 예상을 넘어, 보다 정량화되고 체계적인 예보의 가치 평가를 가능하게 할 것으로 기대 된다.
        1935.
        2012.04 KCI 등재 서비스 종료(열람 제한)
        본 논문에서는 기후변화에 의한 지역별(북부강원산지, 북부수도권, 중부, 남부) 스키리조트 산업의 미래를 전망하기 위하여 스키활동 기간과 제설 작업의 변화를 파악하였다. 지역별 스키리조트의 대표 지점인 용평, 양지, 무주, 에덴벨리리조트와 인접한 관측지점의 1973~2011년간 기후자료와 A1B 시나리오에 의해 생산된 2012~2100년간 미래기후자료를 이용하였다. 오늘날 스키리조트는 북부에서 중부 지역까지는 개장일의 차이가 크지 않지만 남부 지역의 에덴벨리리조트는 스키 개장일이 늦고 폐장일을 결정하는 설질 유지 또한 불리하다. 한국의 미래 스키산업은 스키활동 기간과 제설 작업의 조건이 불리해질 것이다. 무주와 에덴벨리리조트는 미래에 스키장을 한 달도 개장하지 못할 것으로 전망된다. 제설 작업을 고려한 미래 스키장 산업은 지역 별로 비교할 때 북부산간지역인 용평스키리조트에서 제설일수의 감소가 가장 적으므로 미래 스키산업의 활성화를 위한 가장 유리한 지역이 될 것이다.
        1936.
        2012.04 KCI 등재 서비스 종료(열람 제한)
        본 논문은 최근에 국내 게임시장에 큰 반향을 일으키고 있는 오픈마켓과 셧다운제의 제도화 과정을 통해 시장에 미치는 영향과 그 의미를 살펴본다. 제도는 사회적 환경과 인식이 반영된 결과물이라는 점에서 오픈마켓과 셧다운제를 이해하는데 핵심 요소이다. 이에 오픈마켓과 셧다 운제의 제도가 추진되는 사회적 환경과 인식의 영향과 그 결과의 방향성을 조망한다. 오픈마켓은 스마트폰의 도입에 따라 이전과 다른 모바일콘텐츠 유통체계의 변화에 대한 기존 국지성 제도와의 합리적이고 미래지향적인 접근을 통해 시장 활성화에 기여했다. 한편 셧다운제는 게임이용과정에서 나타난 문제적 현상에 대한 환경적 구조적 진단 보다는 현상적 형태에 집중함으로써 제도화의 의미가 퇴색하고 오히려 시장에서 부작용을 부추기는 결과를 가져오고 있다. 이러한 상반된 결과의 방향성을 통해 제도화의 중요성을 지적하였고, 오픈마켓과 셧다운제도의 실효성과 제도 및 시장성에 대하여 고찰하였다.
        1938.
        2012.02 서비스 종료(열람 제한)
        최근 아이슬란드, 칠레, 인도네시아 등 세계 각지에서 화산 폭발이 발생하여 대규모 인명피해, 재산피해 및 항공운항 중단등의 피해가 발생하였다. 또한 일본 미야기현(宮城縣)에서 2011년 3월에 쓰나미가 발생하여 한반도의 지진 발생 및 화산 재해에 대한 관심이 높아지고 있다. 그러나 국내에는 화산분화에 대한 대응책이 미비하고 국가 차원의 화산대응정책 수립을 통해 화산재해 사전 경감을 위한 대응 체계 구축이 필요한 상태이다. 본 연구에서는 백두산 화산 폭발시 발생하는 화산재가 산업에 미치는 영향을 조사하고, 화산재에 의한 국내외 피해 사례를 조사하여 우리나라의 산업피해를 예상하고 대응 방안 및 관리기준을 마련하고자 한다. 또한 아이슬란드의 에이야프얄라요쿨(Eyjafjallajökull)화산, 칠레의 차이텐(Chaitén) 화산, 일본의 신모에다케(新燃岳) 화산 폭발 피해 사례 등을 조사하였으며 각 화산 폭발로 인한 1차·3차 산업의 피해 현황을 비교·분석하였다. 그리고 국내의 경우 화산재에 대한 피해 현황 자료의 부재로 유사재해인 황사에 대한 피해 및 관리 기준등을 조사하였고, 주 화산 피해 발생 국가의 화산재 대응 관리 기준 조사를 통하여 우리나라의 백두산 화산 폭발시 화산재 피해 대응 방향을 제시하였다. 향후 본 연구를 통해 백두산 화산 폭발로 인해 발생하는 화산재에 의한 산업분야별 관리기준 및 대응 방안 개발을 진행하는데 도움이 될 것으로 기대된다.
        1939.
        2012.02 KCI 등재 서비스 종료(열람 제한)
        광양항은 항만 활성화와 물동량 증가를 위하여 2004년부터 항만물류산업 인프라 관련 사업을 실시하고 있다. 이러한 개발 사업계획은 광양항의 개발 축소, 물동량증가 둔화, 터미널 운영사 감소 등으로 인하여 많은 변화에 직면하고 있다. 광양항의 안정적 성장기반 확보와 자립항만의 달성을 위해서는 현 시점에서 인프라에 대한 계획 및 방향에 대한 재검토 필요성이 대두되고 있다. 본 연구에서는 광양항의 하드웨어적인 인프라보다는 소프트웨어적인 인프라 개선의 대안에 중점을 두었다. 이러한 대안의 우선순위를 분석하기 위하여 연구방법론으로 AHP 기법을 적용하였다. 본 연구에서는 의사결정을 위한 측정요소로 수익성, 용이성, 시급성, 장래성이 선정되었으며, 대안으로는 글로벌 네트워킹 구축, 물류전문인력 양성, 친환경저비용항만 운영, 전문물류기업 육성이 선정되었다. 설문조사는 광양항을 이용하는 해운선사, 항만 운영사, 배후물류기업, 화주의 물류전문가를 대상으로 실시하였다. 분석 결과, 측정 영역의 중요도는 해운선사, 항만운영사, 화주, 배후물류기업 순서로 나타났다. 측정요소는 수익성, 장래성, 시급성, 용이성 순서로 중요도가 분석되었다. 대안의 우선순위는 글로벌네트워킹 구축, 친환경저비용항만 운영, 전문물류기업 육성, 물류전문인력 양성 순서로 나타났다.
        1940.
        2012.02 KCI 등재 서비스 종료(열람 제한)
        This paper presents a method to optimize motion planning for industrial manipulators with redundancy. For optimal motion planning, first of all, particular inverse kinematic solution is needed to improve efficiency for manipulators with redundancy working in various environments. In this paper, we propose three kinds of methods for solving inverse kinematics problems; numerical and combined approach. Also, we introduce methods for optimal motion planning using potential function considering the order of priority. For efficient movement in industrial settings, this paper presents methods to plan motions by considering colliding obstacles, joint limits, and interference between whole arms. To confirm improved performance of robot applying the proposed algorithms, we use two kinds of robots with redundancy. One is a single arm robot with 7DOF and another is a dual arm robot with 15DOF which consists of left arm, right arm with each 7DOF, and a torso part with 1DOF. The proposed algorithms are verified through several numerical examples as well as by real implementation in robot controllers.