A supervisor's role is very important to have accident free environment in a company. In order to take full advantage of safety management system, company safety supervisors require to learn how much responsibility they have in their company. To improve safety supervisor's knowledge, they must spend time to learn the importance accident free environment. To improve the efficiency of safety management, the supervisors need to voluntarily emphasize the importance of safety management.

최근 우리나라의 건설산업은 Project의 규모가 대형화됨에 따라 기계화 시공 신공법 도입등 공정작업이 다양해지고 새로운 방법들이 많이 시도되고 있으며 건설산업도 기획, 설계, 발주, 시공, 유지관리라는 연속적 단계를 통하여 각 단계가 상호 유기적 연관성을 가지므로 건설현장의 근원적 안전성 확보를 위해서 건설 시설물의 Life cycle 전 단계를 걸쳐 안전관리 개념과 기법이 도입되어야 한다. 따라서 본 연구에서는 CM에 의한 단계로 안전성 확보에 주력하고 미국 CMAA의 단계별 기능별(phase, 6Function) 업무내용에서와 같이 Safety Management를 한다. 또한 CM제도 정착에 따른 초기단계를 규정하는 안전관리 법령 재정을 하여 단계적으로 자율적 안전 관리를 유도하여 재해예방을 하도록 해야한다.

In the future, all kinds condition of industrial safety is a primary need in all advanced countries in which workplace safety is an issue. Furthermore, the increasing complexity of production systems and the rapidity of technological innovation have consolidated the recognition of the strategic value of safety, alongside the traditional competitive factors such as quality, costs, delivery time and flexibility, In this paper, the some critical issues of changes and counter-plan in an adequate safety management were identified by above considerations as follows： needs of systematic identification and analysis of safety factors； requirements to define priorities and budgeting to support the decision-making process; and needs of audit activities and indicators which measure company performance in terms of safety improvements, and so on.

A supervisor's role is very important to have accident free environment in a company. In order to take full advantage of safety management system, company safety supervisors require to learn how much responsibility they have in their company. To improve safety supervisor's knowledge, they must spend time to learn the importance accident free environment. To improve the efficiency of safety management, the supervisors need to voluntarily emphasize the importance of safety management.

Cost-benefit analysis was investigated to propose the analysis method of the effect of investment and the optimum investment level of safety management cost for preventing gas accident in the B governor station. From five classifications of safety management costs consisting of cost items with similar characters and potential accident costs calculated by risk assessments(FMEA/HAZOP), we found that the order of the benefit(the reduction cost of the potential accident cost) was the instrument increase and repair cost > the safety checking and inspection cost > the labor and training cost > the safety equipment and corresponding cost > the research and development cost. As the benefit was increased with increasing the investment cost, the effect of investment was increased with decreasing the Investment cost. As a result, the optimum safety management cost was estimated and the investment level was analyzed by the model of optimum investment level.

Needs of each enterprises for safety managers ability should be clarified and then the result should be taken into account regular curriculum and assessed it regularly. Keeping the student competance without this series of feedback will not be possible. A method, to assess the effectiveness of curriculum course, DACUM(Developing A Curriculum) could be applied in order to find out what subject will be useful. Questionnaire results with weight factor could be put into this study Task Analysis method and the importance determining method have been introduced here. As a further study, it is concealed that a study taking into account of company size, nature, local situation are needed to find out more useful application.

To keep an enterprise's competitiveness on the condition of the automatic manufacturing system such as FA, FMS and CIM, all the maintenance problems should be considered seriously In not only in production and maintenance but also in related industrial safety. As we analyze in the surveys the maintenance management of domestic enterprises and the causes of Industrial accident, there will be necessity of drawing up countermeasures for preventing industrial accidents and for ensuring expertise maintenance technologies. Based on these analyses, the safety information system, maintenance management information system, and the machinery condition diagnosis technique are studied by using of the knowledge-based system under the real-time computer-operating environment and using fuzzy linguistic variable. This computer system based knowledge-based diagnosis can easily provide not only the knowledge of expert system about deterioration phenomenon of industrial robots, but also the knowledge of relating safety and facility all the time. Therefore, it is expected to improve the efficiency of business processes in the production and safety when we use this system.

This article is concerned with various aspects of establishing the global standard for occupational safety and health management system (OHSMS). The notion, main features, and brief history of the OHSMS are presented. The OHSAS 18000, its assets and liabilities, are reviewed as a prototype of the global standard. It is also addressed the possibility of combining ISO 9000(quality management system), 14000(environmental management system) and the OHSMS into the integrated management system (IMS) as a whole. The concepts of internal and external customers are presented to explain why the environment, safety and health should be incorporated into the notion of total quality 'Participation of the members' and 'standardization of the 4Ms (Man, Machine, Materials and Method)'are emphasized as the major enablers of the IMS. Finally, the industrial, academic and governmental roles are discussed for developing the IMS and setting it down into the Korean industries.

제조물 결함에 의한 기업의 배상책임은 전형적인 기업의 리스크로서 전통적으로 투자, 금융, 보험, 위기 관리, 시스템 안전 분야에서 사용되고 있는 리스크 관리 기법을 적용하여 효과적으로 대비할 수 있다. 현재 일부 선진국에서는 리스크 관리 기법을 규격화하여 각 조직 활동에 잠재된 위험 요소로부터의 손실을 예방하고 기회 이익을 구현하는데 활용하고 있다. 본 연구에서는 현재까지 발표된 호주, 뉴질랜드, 캐나다, 일본, 영국, 유럽연합 등의 나라에서 규격화하고 있는 리스크 관리기법에 대해 비교 검토하고 그 장단점 및 특징을 조사하였다. 또한 제조물 결함에 따른 기업의 배상 책임에 대비하여 기업이 제품 안전 경영체계를 수립하는데 리스크 관리 기법이 적절히 활용될 수 있는지에 대해 토의하였다.

To keep enterprise's competitiveness on condition of the automatic manufacturing system such as FA, FMS and CIM, all the maintenance problems should be considered seriously in not only production and maintenance but also related industrial safety. As we analyze in the surveys for the maintenance management of domestic enterprises and the causes of Industrial accident, there will be necessity of drawing up countermeasures for prevention of industrial accidents and for ensuring expertise maintenance technologies. Based on these analyses, this study studied the safety information system, maintenance management information system, and the machinery condition diagnosis technique by using of the knowledge-based system under the internet environment. This web based knowledge-based diagnosis system can easily provide not only the knowledge of expert about deterioration phenomenon of industrial robot, but also the knowledge of relating safety and facility on everywhere, everytime. Therefore, when we use this system, it is expected to improve the efficiency of business processes in the production and safety.

About one hundred twenty thousand (±twenty thousands) people are wounded and about two thousand persons are dead from industrial accidents in Korea ［1］, Therefore, Korea is notoriously called as a haven of disaster. This study investigated the safety situation of industries and attitude of safety managers to reduce the occurrence of accidents. The period of investigation was during March through August, 1977. Two hundreds of safety managers were replied, but replies of 183 were used because some of them were inappropriately answered for the questions. Their replies were analyzed by SAS program. As a result, only three persons out of 183 managers were women, 83% of them are married, 25.1% were graduated from university, 15.2% were graduated from two-year college. Full time safety managers were only 8% of them. Safety managers who have experienced injured before their current position were 26.3%. This confirms that company allocated injured persons to a safety department. Korea also needed an educational agency like NIOSH and a punishment agency like OSHA in USA［5］. These agencies can solve a fundamental problem of safety management for small-and-medium size industries. Furthermore, a new safety management bureau for controlling these two agencies will be necessary to reduce accidents in near future.

Inchon Port is the second largest import-export port of Korea, and has the point at issue such as the excessive logistics cost because of the limits of handling capacity and the chronic demurrage. There are few research activities on the analysis and improvement of the whole port operation, because Inchon Port not only has the dual dock system and various facilities but also handles a various kind of cargo. The purpose of this paper is to develop the simulation program as a long-term strategic support tool, considering the dual dock system and the TU(Terminal Operation Company) system executed since March, 1997 in Inchon Port. The basic input parameters such as arrival intervals, cargo tons, service rates are analyzed and the probability density functions for these parameters are estimated. The main mechanism of simulation model is the discrete event-driven simulation and the next-event time advancing. The program is executed based on the knowledge base and database. From the simulation model, it is possible to estimate the demurrage status through analyzing various scenarios and to establish the long-term port strategic plan.

Eventually so as to realize the construction safety, 1 found out the cause of accident and specificities of the construction industry. This study presented to several situations and problems on construction safety. As a result of this study, the below matters must be improved for more effective the construction safety management system. 1. It need to introduce the total construction safety management system. Because there is not effectiveness in the current safety management to the first on the construction field. a. We must consider the safety in the whole parts of the process of the construction and constructors of each part must devide responsibility of the construction safety as a CDM(The Construction Designed Management) used in UK. b. It is desirable to proceed control of safety in the whole parts of the construction to introduce the total safety coordinator that can consult the matters of safety as a law accepted in EU. c. Like management of the construction safety in USA, direction of the construction safety must be made to work exactly by code or manual. d. To improve the organization of the construction safety on the construction field unefficient, it must be introduced safety supervisor, safety coordinator or institutionalization of safety consultant. 2. The law of the construction safety not only have wasteful element but also decrease efficiency by overlapping of regulation, The Ministry of Labour and The Ministry of Construction & Transportation, So laws related with safety must be instituted. a. To realize total safety management, The Ministry of Labour must legislate the basic law about safety management in whole field. b. To legislate the construction safety under one law, and improve efficiency of the overlapping of regulation and the similar law by The Ministry of Construction & Transportation. c. It must be made the law of construction safety that can proper to change of situation in construction. d. The standard of safety must be instituted belong to international level and improved by year. e. We must improve irrational regulation to realize activity of safety self regulating for progress competition in construction industry