본 연구에서는 해상에서 빈번하게 발생하는 추진기 로프 감김 사고를 예방하기 위해 개발된 로프절단장치의 안전성 및 효용성 에 대한 연구를 시도하였다. 먼저 이론식과 유한요소 해석을 통하여 실선 실험에 사용될 세 종류의 로프절단장치의 볼트의 강도 및 장치가 축계에 미치는 비틀림응력을 계산하였다. 그 결과 로프절단장치에 사용된 볼트는 안전수명설계 및 손상허용설계의 관점에서 적절하게 설계된 것으로 확인되었으며, locking-up 발생 시 축계에 미치는 영향도 미미하여 안전성 또한 만족할 수 있는 수준인 것으로 나타났다. 안전성 검증을 마친 세 종류의 절단장치가 설치된 선박을 활용하여 실제로 해상에서 로프 및 어망을 절단하는 실험을 진행하였으며, 그 결과 대체적으로 실험에 사용된 20~50 mm 굵기의 로프를 잘 절단하였으나, 소형 축계에 장착된 절단장치의 경우 굵은 로프를 절단할 때는 효용성이 저하함을 알 수 있었다.

In order for the probe to perform ocean exploration and survey research, it is necessary to adjust the position of the ship as desired by dynamic positioning system. The dynamic positioning system of T/S NARA is applied to K-POS dynamic positioning system of Kongsberg, which makes maintaining the ship's position, changing position and heading control possible. T/S NARA is not capable of dynamic positioning if one or more propulsive forces are lost with DP Level One. However, it is predicted that dynamic positioning can be achieved even at the time of missing one thrust in a good sea condition. Therefore, we want to analyze the effect of each propulsion on the performance of dynamic position system. When one of the bow thruster and azimuth thrusters lost their propulsion, maintaining the ship's position, changing position and heading control performance were compared and analyzed. If the situation occurred disable from using the bow thruster, they can not maintain ship's position. Azimuth thruster was influential for the ship's position control and bow thruster was influential in heading control. The excellent dynamic positioning performance can be achieved, considering the propulsion power that will have a impact on each situation in the future.

The main purpose of this study is to explore a way of fisheries cooperation through the ODA demand survey in the fisheries sector on 8 ASEAN countries. In detail, we identified the status of detailed cooperation in the fisheries sector with ASEAN countries and identified new cooperation network construction projects in accordance with the changes in external cooperation environment, and presented strategies and policy directions for fisheries cooperation projects. For this purpose, we surveyed the questionnaires of 8 ASEAN countries using structured questionnaires for local fisheries experts. As a result of the questionnaire analysis, eight ASEAN countries were classified into three groups according to DAC beneficiary standards and suggested implications. Based on the results of the survey, the basic direction of the fisheries cooperation projects in each of the eight countries surveyed was set up, and the preferred projects for fisheries cooperation projects were proposed by dividing them into groups. In addition, the research results were used to systematically establish national promotion plans.

The planing hull is characterized by a large change in the posture according to the speed, and the shape of the propeller varies, so that the hull resistance varies greatly depending on the propeller used. Especially, the Savitsky system, which is widely used for estimating the resistance of planing hull, does not consider the characteristics of these propeller and ship bottom spray rails. In this paper, in order to investigate the difference in resistance characteristics between the propeller and the bottom of the propeller of 6m and 12m class propeller using propeller such as outboard or stern drive, A comparative test was conducted on resistance and attitude posture changes in the Circulating Water Channel of Institute of Medium & Small Shipbuilding. As a result of comparison test, it was confirmed that there is a clear difference in the attitude change due to the presence of the bottom floor spray rail and the change in resistance characteristics due to the installation of the propeller. However, attitude change with the propeller was found to be insignificant.