이 연구의 목적은 특수교육 교사들을 대상으로 다문화 교육 역량에 대한 인식에 대해 알아보고 이러한 다문화 교육 역량 인식이 교사의 다문화 교육 실천에 어떠한 영향을 미치는가를 알아보는데 있다. 연구대상은 특수학교에 근무하고 있는 교사 350명을 대상으로 설문조사를 실시하였다. 연구결과에 의하면 교사의 다문화 교육 역량에 대한 인식은 다문화 교육 실천과 정적인 상관관계가 있으며, 다문화 교육 하위 역량 중에서 다문화에 대한 인식이나 태도, 다문화 관련지식, 다문화 교육기술 순으로 다문화 교육실천에 영향을 미치고 있다. 특히 교사의 다문화 연수경험, 교육경력, 학력, 다문화 학생 지도 경험이 교사의 다문화 교육 역량 인식수준에 유의한 영향을 미치고 있다. 따라서 특수교육 교사들의 다문화 교육 역량을 높이기 위해서 자율적인 장학협의체, 특수학교 사정에 맞는 연수프로그램, 대학과 대학원에서의 교과목 개설 등이 필요하다. 이 연구는 다문화 교육의 실천가인 특수교육 교사들의 다문화 교육 역량을 높이기 위한 방안을 강구해야 한다는 점을 시사하고 있다.

The purpose of this study is to evaluate the effect of improvement on the impact resistance and strength properties of cement composites by surface modification of aramid fiber. For aramid fiber reinforced cement composites, therefore, dispersion capability and the bonding efficiency between the fibers and the cement composite material need to be improved. It is possible by modifying surface properties to hydrophobic, it is considered that oiling agent ratio of 1.2 % and improvement of performance is in need to be investigated. In this study, short aramid fibers were mixed by different fiber length and oiling agent ratio. And improvement of strength properties and impact resistance performance of hybrid cement composites were evaluated under the influence of steel fiber. As a result, strength properties of aramid fiber reinforced cement composites are different by mixing ratio of fiber, oiling agent ratio and length of fiber. In case of cement composites which have same volume fraction and fiber length, tensile strength and flexural strength were improved with increase of the emulsions throughput of the fiber surface. The results of evaluation on the static strength properties had effects on impact resistance performance by high-velocity impact. And it was observed that the scabbing of rear was suppressed with increase of the oiling agent ratio.

Emissions from aircraft have impacts on the air pollution of airport and the surrounding area. There are methods of emissions calculated as Tier 1, Tier2, Tier 3A and Tier 3B. Thus, this study investigated emissions from aircraft at the Gimhae International Airport using EDMS(Emissions & Dispersion Modeling System) program. Results of estimation from aviation emissions, Tier 3B considering all parts which can occur at the airport has the largest amount emissions. In order to understand the relation between aviation emissions and distribution of ozone concentration over airport area, numerical evaluation were carried out. Although the difference of surface ozone distribution between numerical assessment with and without aviation emissions was little, effects of air pollution at airport area from aviation emissions of NOx and VOCs.

Robotics-Assisted Bridge Inpection Tool (RABITTM) combines a capability of conventional non-destructive evaluation techniques for condision assessment of concrete bridge decks, including electrical resistivity (ER), ground-penetrating radar (GPR), Impact-echo (IE), ultrsonic surface waves (USW), and a high resolution digital camera. In this study, the RABITTM platform was used to evaluate delaminaitons in a concrete bridge deck in the laboratory.

In this study, the investigation of the local damage evaluation method for the SC structure subjected to impact load was carried out. The conventional RC formula and SC formula to calculate wall thickness to prevent perforation were studied and compared. Finally, these results were compared with finite element analysis results using LS-Dyna, and the future direction to develop the reasonable local damage evaluation method of the NPP SC structure was suggested.

The bridge is one of the important infrastructures. If vehicle collision is occurred in bridge column, It can caused for bridge collapse. Bridge columns are vulnerable to impact loadings of Vehicles. In this study, Non-linear dynamic analysis of reinforced concrete bridge column in impact loading were performed using LS-Dyna.

Tensile stress and strain of rear by shock wave become the cause of rear side scabbing of concrete subjected to high-velocity impact. Improvement of flexural and tensile performance by fiber reinforcement has great effect on the suppression of the rear scabbing.

In this study, local fracture of concrete was evaluated through high-velocity impact test. As results, increase of bending tension performance by fiber reinforcement did not affect penetration depth Control, but it decreased rear side fracture thickness and diameter. Therefore, it was observed that fiber reinforcement decreases scabbing limit thickness.

In this study, impact of high-velocity projectile by mixing steel fiber, polyamide, nylon, polyethylene fiber which have different shape and properties respectively. Scabbing is restrained because of micro-crack caused by the shock wave offset effect and energy dispersive of synthetic fibers are mixed populations.

The purpose of this study is to establish a mathematical equation to evaluate the compressive strength of concrete from the measured impact resonance test values(Ed). The correlation was made between the measured and evaluated compressive strength values and the correlation was quite strong.

According to recent meterological disasters, social awareness for safety of infrastructure is heightened by increasing natural disasters such as Fukushima accident, landslide of Umyeon mountain. Also scale of landslide is increased in Korea but safety review of dam is insufficient. In this study, we reviewed data(reservoir capacity, type of dam, danger map of korea forest service, satellite pictures, geologic map, etc.) and conducted site investigation whose the area is the most dangerous. Based on the results, we choose the most dangerous dam and analysis site close examination, slope stability analysis, scale of debris flow, etc. As a result, we will conduct measures establish on reinforcement and final evaluation of landslide's hazard.

Life Cycle Assessment(LCA) has been carried out to evaluate the environmental impacts of glass bottle recycle. The LCA consists of four stages such as Goal and Scope Definition, Life Cycle Inventory(LCI) Analysis, Life Cycle Impact Assessment(LCIA), and Interpretation. The LCI analysis showed that the major input materials were water, materials, sand, and crude oil, whereas the major output ones were wastewater, CO2, and non-hazardous wastes. The LCIA was conducted for the six impact categories including 'Abiotic Resource Depletion', 'Acidification', 'Eutrophication', 'Global Warming', 'Ozone Depletion', and 'Photochemical Oxidant Creation'. As for Abiotic Resource Depletion, Acidification, and Photochemical Oxidant Creation, Bunker fuel oil C and LNG were major effects. As for Eutrophication, electricity and Bunker fuel oil C were major effects. As for Global Warming, electricity and LNG were major effects. As for Ozone Depletion, plate glasses were major effects. Among the six categories, the biggest impact potential was found to be Global Warming as 97% of total, but the rest could be negligible.

This experiment was carried out to establish the optimum cutting time, plant growth regulator, and bed-soilfor rooting by greenwood cutting of Schisandra chinensis. Approximately 7㎝ long-shoots of greenwood cuttings weretransplanted by various cutting times, plant growth regulators, and bed-soils in the plastic-film house. The rooting rate ofgreenwood cutting was 12.5% in the April 5th, 73.5% in the May 8th, and 75.5% in the August 5th. The number and lengthof primary root in greenwood cutting were more in the early May than those in the early August. For mass propagation ofSchisandra chinensis. using greenwood cutting, shoots were treated with plant growth regulators on May to increase rootingrate. Rooting rate was 100% with IAA 50㎎/ℓ,92.9% with NAA 100㎎/ℓ,and NAA 1,000㎎/ℓ,for 60 min. To selecteffective media for rooting, various medias for bed-soil were treated by single and mixture form for 100 days after cutting.Rooting rate was 91.8% in the single treatment of peat moss or decomposition of granite soil, and this result was better thanthose in other treatment. The treatment by 1:1 mixture of peat moss and horticulture bed soil was rooting with 94.0% bestrooting rate.

This study presents a practical approach for imaging concrete pavement and bridge deck slabs for the presence of delamination defects. Air-coupled impact resonance (i.e. impact-echo) test data are presented as a fused image using stacked spectral C-scans of the tested deck surface. The low frequency (less than 6 kHz) dynamic vibrational response of delamination defects, principally caused by the behavior of flexural vibration modes, clearly and accurately reveals the presence of internal shallow delamination defects. Images are constructed with data from air-coupled impact resonance tests carried out on laboratory and field concrete deck samples and an in-service concrete bridge deck.

Vehicle collision is one of cause for structural failure. The increased load carrying capacity of the truck is also a threat for existing structures. Recent studies show the actual shear capacity of the column of bridge is larger than industrial standards. In this study, truck-column collision model was developed and load carrying capacity of a column were evaluated.

In this study, sensitivity analysis to investigate the effect on analytical results of the aircraft impact analysis parameter for the nuclear power plant was carried out. Verification of the analytical model and method using the test results was performed. The eroding parameter of the Winfrith concrete material model in LS-Dyna and modelling method of the SC wall structure were studied. Finally, these results are to be used for the development of the structural safety evaluation procedure for the aircraft impact on the nuclear power plant.

Construction of long span bridges is rapidly increasing, the criteria of impact load and study of stability for suspension bridge cables by rear-end collisions and crash of the vehicle, not at the moment is the actual situation. In this study, the main cable of suspension bridges was applied appropriate impact loads and analyzed the structural stability of the cable.

this study is experiment result of steel fiber reinforced concrete(SFRC) panel with flexural and impact resistance performance. The variables are the fiber volume fraction and aggregate size. The height and width of SFRC panels are 200 mm. The experimental results showed that flexural and impact resistant performance is improved by increased in steel fiber volume fraction.

According to NEI 07-13 R8, in aircraft impact analysis for new plant design, global structural damage of the target structure can be evaluated analytically using one of the following methods of evaluation: 1) Force time-history analysis method. 2) Missile-target interaction analysis method. It depends on the availability of data on the dynamic characteristics and the intended level of detail of analysis. The purpose of this study is to evaluate the effect on the analytical results of the aircraft impact analysis method. Several impact analyses using various method were performed for the simplified external SC wall of the APR+ nuclear power plant structure.