검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 256

        201.
        2014.04 KCI 등재 서비스 종료(열람 제한)
        This study provides a result of thermal mercury reduction for inventing a mercury recovery technology from the sludgewhich contains high concentration of mercury. Physical, chemical and thermal properties of the sludge were analyzed andmercury degradation at elevated temperatures was investigated to find out the optimum temperature range for thermalrecovery of mercury from the sludge generated from an industrial facility, which contained high concentration of mercury.The study was carried out in the temperature range of up to 650oC from 200oC, and 500~710µm particle size of wastesludge samples were selected from such industries. As primary thermal tests the sludge was heated up to observe weightdegradation at a continuous weight measurable thermogravimetric analyzer and a muffle furnace and the degradationcurves from both devices were found to be well matched. Mercury conversion to gaseous form was investigated fromthe analyzed data of mercury concentrations sampled every 25oC from a muffle furnace. Cold vapor atomic absorptionspectroscopy (CVAAS) Hg analyzer was used for the analysis of mercury content in solid and liquid samples. Most ofmercury was degraded and released as gas phase at the temperature range from 300oC to 550oC, which could be theoptimum temperature of mercury recovery by thermal method for the sludge containing high concentration of mercury.Based on these thermal mercury reduction studies, degradation kinetics study of mercury was conducted to provide thereaction kinetics data for further reactor design to recover mercury using a thermal method.
        202.
        2014.04 서비스 종료(열람 제한)
        This study is to evaluate compressive behavior of confined concrete cylinders using various materials. Materials are tape, velcro, fishline, frp and scratch film. At compressive strength test result, load of confined concrete cylinder using velcro and fishline was slowly decreased after ultimate strength. Also, confined concrete cylinder using tape and frp seem to increase the compressive strength.
        203.
        2014.03 KCI 등재 서비스 종료(열람 제한)
        수박은 토마토에 비하여 라이코핀 함량이 60% 높으며, 라이코핀 고함유 수박 품종개발에 관심이 집중되고 있다. 그러나 라이코핀 함량 분석을 위한 대량 분석 체계가 마련되지 않아 고함유 유전자원의 선발에 어려움이 있었다. 따라서 본 연구에서는 신속하고 간편한 lycopene 함량 분석기술의 개발과, 개발된 기술(microplate법)을 이용하여 라이코핀 고함유 유전자원을 선발하고자 하였다. 그 결과 UV spectrophotometer를 이용한 방법을 개선하여 Microplate법을 개발하였다. Microplate법은 HPTLC를 이용한 방법과 약 97%로 높은 정의 상관을 나타내어 분석의 정확성이 높은 방법임을 확인하였다. 따라서 Microplate법을 이용하여 수박 유전자원, 계통 및 96점을 대상으로 수박 과실의 라이코핀 함량을 분석한 결과 라이코핀 함량이 생체중 1 g 당 3.2∼98.3 μg・g-1의 넓은 변이를 보였다. 선발 유전자원은 시판 대비품종(스피드플러스; 10.3 μg・g-1 FW)에 비하여 4.4∼9.6배 높은 수준이었다. 선발된 자원들은 라이코핀 고함량 품종개발에 이용 될 수 있을 것으로 판단되었다.
        204.
        2014.03 KCI 등재 서비스 종료(열람 제한)
        강교의 정확한 피로균열의 발생원인 또는 교량의 피로안전성을 검토하기 위해서는 적합한 응력이력 측정이 요구된다. 그러나 실제 현장에서의 응력이력 측정은 현장 여건과 경제성, 작업성 등의 이유로 1개소의 스트레인게이지를 설치하여 계측을 실시한다. 이는 특정 구조물의 실제 치수와 게이지 길이 용접부 응력집중 등의 영향을 고려하지 못하고, 구조 모델링을 통한 응력해석에도 많은 어려움이 있다. 그러므로 본 연구에서는 용접단부에 다수의 게이지 설치, 최소 길이 게이지 사용, 설치 위치 등의 개선된 방법을 적용하여 용접단부와 스트레인게이지 설치 거리에 따른 변형률 진폭에 대한 상관식을 도출하고 국제용접협회 (IIW)의 제안식과 비교하였다. 또한 적합한 피로등급 상세범주 선정을 통해 공용중인 교량의 피로손상도 평가 및 잔존수명을 예측하고 분석하였다. 그 결과 피로균열 발생빈도가 높은 부재파악, 용접단부와 게이지 설치 거리에 따른 변형률의 정량적 파악으로 정확한 피로손상도 평가 및 잔존수명 예측이 가능하므로 향후 교량의 응력이력계측 시 개선된 방법을 적용해야 할 것이다.
        205.
        2013.11 KCI 등재 서비스 종료(열람 제한)
        최근 발생한 대규모 지진으로 구조물의 내진보강에 대한 사회적 관심도가 높아지고 있다. 특히 내진설계가 반영되지 않은 기둥의 경우 지진에 의한 횡하중을 저항하지 못하고, 취성적인 파괴가 유발되어 구조물 전체적 붕괴를 유발할 수 있다. 따라서 빠른 시간내에 보강이 가능하면서 기둥에 손상을 주지 않는 기존의 보강법과 구별되는 응급 보강법이 필요하다. 과거에는 기둥 보강법으로 단면 증설법과 강판보강법 등이 개발되어 현장에 적용되었지만, 최근에는 FRP (Fiber Reinforced Polymer)의 장점을 활용한 탄소섬유시트공법이 많이 사용되고 있다. 본 연구에서는 긴급시공이 가능한 체결식 FRP 내진보강재를 사용한 구조물의 내진성능보강효과를 검토하고자 하였다. 검토를 위하여 실제 구조물의 축소모델의 철근콘크리트 시험체를 제작하고 횡방향 변위하중을 가력하였다. FRP 내진보강재를 이용한 내진보강시공후 실내시험을 통하여 내진성능을 평가하였다. 그 결과 개발된 보강재의 철근콘크리트 구조물에 보강 시, 내진성능이 향상됨을 확인하였다.
        206.
        2013.10 서비스 종료(열람 제한)
        In this study, pure torsion tests were performed for a square cross-section reinforced concrete beams. Stirrup spacing and yield strength of the material was used to the experimental variables. From the test results, large torsional strength were occurred in specimens, which have small stirrup spacing. when, stirrup spacing was greater than the cross-sectional depth, regardless of the stirrup strength, maximum torsional strengths were nearly the same. Contrary, stirrup spacing was less than the cross-sectional depth, according to the stirrup strength, maximum torsional moment were largely. Lastly, the cracks of the beam much occurred in smaller stirrup spacing specimens.
        207.
        2013.10 서비스 종료(열람 제한)
        Post-installed anchor is installed in non-cracked concrete after corrosion to investigate pullout strength of the anchor. Pullout test was conducted diameter, insertion depth of the anchor of a couple of variables. If it receive pullout load, performance of corroded anchor is degraded by the reduction of the cross-section of the anchor body.
        208.
        2013.10 서비스 종료(열람 제한)
        Ten years have passed since the guidelines for bridge inspection facilities was established. Based on the surveying for bridge inspection facilities and analyzing old guidelines, new guidelines for bridge inspection facilities were proposed.
        209.
        2013.10 서비스 종료(열람 제한)
        In this study, we model the pillars was actually performed finite element analysis while changing the amount of reinforcement in the top and bottom of the column the FRP sheet. The behavior of reinforced concrete structures and reinforced by examining the optimal amount of FRP reinforcement decided.
        210.
        2013.09 KCI 등재 서비스 종료(열람 제한)
        Social interest in the seismic retrofit of the structure is growing massive earthquake that occurred recently. The brittle fracture of Non-seismically designed Columns lead to full collapse of the building. In the past, cross-sectional expansion method, a steel plate reinforcing method is applied mainly in recent years, fiber-reinforced method utilizing the advantages of the composite material are preferred. However, the reinforcement methods such as this, there is a drawback to induce physical damage to structures, and time consuming work space is large. IIn this study, FRP seismic reinforcement was developed using the Aluminum connector and the composite material (Glass Fiber Reinforced Polymer). Then, the optimum quantities of FRP seismic reinforcement was determined using a nonlinear finite element analysis program. Finally, the quantity decision process through the design and analysis of FRP reinforcement was suggested.
        211.
        2013.09 KCI 등재 서비스 종료(열람 제한)
        In this study, performance of the post-installed anchor system was evaluated with reduced strength of concrete and anchor. One of the post-installed anchors was selected to performance evaluation. Concrete strength was reduced by freeze-thawing test, and the post-installed anchor strength was reduced by corrosion test. The post-installed Anchor was installed in concrete of freezing and thawing and original concrete, and corroded anchor was installed in original concrete only. Anchor diameter and installation depth of the anchor were the variable for each specimen. Performance of post-installed anchor system of each specimen was evaluated by pullout test. Anchor diameter and installation depth of anchor, it may affect the performance of the post-installed anchor system from the experimental test results. Fracture mode of each post-installed anchor system had occurred differently depending on the durability of concrete and anchor. The anchor pullout strength from the experimental test results was used in order to compare with the results of CCD (Concrete Capacity Design) method, and CCD equation was modified. Modified equation was able to predict the anchor pullout strength of post-installed anchor system in Original concrete and freezing and thawing of concrete.
        212.
        2013.04 서비스 종료(열람 제한)
        In this study, thickness of FRP sheet on Connector, which did not cause any physical damage to concrete column, was decided by using nonlinear finite element analysis. Through this analysis, the optimal thickness was determined by a thickness of the Glass Fiber sheet
        214.
        2012.08 KCI 등재 SCOPUS 서비스 종료(열람 제한)
        This study was conducted to establish the extraction conditions for the optimization of the biological activities of black garlic using the response surface methodology (RSM). The extraction conditions were based on the central composite design, with 15 kinds of variations in the extraction temperature (50-90℃), extraction time (3-15 hrs), and ethanol concentration (0-100%). The total phenol, flavonoids, thiosulfinate contents, and anti-oxidant activity of black garlic extract were significantly higher at the J condition (90℃ for 9 hrs with a 50% ethanol concentration). In this condition, the biological activities such as DPPH radical scavenging (66.10%), ABTS radical scavenging activity (75.02%), and reducing power by of FRAP (375.4 μM/mL) were excellent. Overall, the extraction conditions for the optimized biological activities of black garlic via RSM were expected to be at 89.68℃ for 9.79 hrs with a 55.72% ethanol concentration. The actual values were 96.4-114.8% of the predicted values.
        215.
        2012.05 KCI 등재 서비스 종료(열람 제한)
        최근 발생한 대규모 지진으로 구조물의 내진보강에 대한 사회적 관심도가 높아지고 있다. 내진성능 향상을 목적으로 FRP 복합재료의 사용성에 대한 연구 및 개발이 활발히 진행되고 있다. 복합재료를 사용한 내진보강재는 강성과 연성을 가진 재료이어야 하므로 복합재료 보강재 설계 시 강성재와 섬유의 선택이 중요한 변수이다. 내진성능 향상을 위한 섬유보강 복합재료의 최적조합을 인장 테스트를 통하여 선정하였다. 선정된 섬유보강 복합재료 보강재를 실제 구조물에 적용하기 위하여 실제 기둥부재에 보강하는 것을 가정하여 유한요소 해석하였다. 유한요소 해석을 통하여 구조물의 내진성능 향상효과를 변위-하중 관계를 통하여 평가하였다. 섬유보강 복합재료 보강재를 사용할 경우 구조물의 내진성능이 증가한다는 해석적인 연구 결과를 도출하였다.
        216.
        2012.04 KCI 등재 서비스 종료(열람 제한)
        본 연구는 국내 식물원・수목원 총 10개소를 대상으로 이용자의 행태 분석과 만족도 평가를 실시하였다. 식물원・수목원의 이용객들의 전반적인 현황을 파악하고 공립 및 사립 식물원・수목원의 만족도를 비교‧분석하여 이용자를 고려한 개선방안을 제시하고자 하였다. 행태 분석에서 이용자들은 상대적으로 입장료가 낮은 공립에 대한 방문 횟수가 더 잦게 이루어지고 있었다. 접근을 위해서는 원거리(3시간 이내)에 있음에도 불구하고 사립 식물원・수목원을 찾는 이용객이 공립에 비해 두배 이상 높은 것으로 나타났다. 방문 동기, 목적에 있어서 지인 소개로, 휴양을 위해 이용하는 경향이 높았다. 이용자 만족도 평가에 있어서 종합 만족도는 50%이상으로 높은 경향을 나타내었으며 소 만족도 평가에서 대상지 특성은 전체적으로 사립에서 만족도가 높았다. 이는 접근성, 공간구성, 동선 측면에서 공립보다 긍정적인 평가를 받고 있는 것으로 판단되었다. 유지관리에 있어서는 공공시설적 측면에서 사립이 공립보다는 만족도가 약간 낮게 나타나 복지시설을 위한 보완이 필요한 것으로 판단되었다. 그러나 안내시설, 식물표찰, 시설물 안전성 등의 세심한 관리에 있어서는 사립에 대한 만족도가 높았다. 서비스 측면에서 입장료 부과가 상대적으로 높은 사립에서 입장료 및 안내원 친절도에 있어 만족도가 높게 나타났다. 연구조사 결과, 이용자들은 휴양형의 고급여가문화를 선호하는 것으로 파악할 수 있었다. 이는 과거의 낮은 입장료, 대면적의 일률적인 관람코스에서 벗어나 창의적이면서 다양한 체험과 휴양기능을 충족시킬 수 있는 질적 녹색여가생활에 대한 요구도가 높아지고 있는 것으로 판단할 수 있었다. 본 연구는 이용자 만족 경향을 파악하기 위하여 설문의 만족도 현황에 따른 단순 비교, 분석에 의해 도출한 결과로서 종합 만족도와 소 만족도들간의 구체적인 상관성 및 우선영향인자 추출 등에 따른 객관적 지침 마련에 있어 한계점을 갖는다. 향후, 만족도에 영향을 미치는 요인의 우선순위를 결정하여 운영, 관리방안에 적용해야 할 것이다. 이러한 우선인자를 적용, 보완한 후에도 모니터링이 지속적으로 진행되어야 할 것이며 이를 통하여 적재적소의 특화된 수준 높은 휴양 및 교육 문화가 정착되어져야 할 것이다.
        217.
        2012.02 KCI 등재 서비스 종료(열람 제한)
        옥상녹화는 부족한 도심내에 녹지를 제공해줌은 물론 현대인들에게 휴식공간을 제공해줄 수 있는 장소로 창출되어 질 수 있다. 본 연구는 오피스 건물의 옥상녹화 도입시, 효율적인 이용방안을 위한 구체적인 조성기법을 제안하고자 하였다. 따라서 옥상녹화가 조성된 오피스 건물 중 4곳을 선정하여 이용자들의 선호도 및 만족도를 조사ㆍ분석하였으며 효율적인 이용활성화를 위한 측면에서 다음과 같은 조성방안을 도출하였다. 이용자 선호도 조사결과, 식재식물에 있어 꽃, 열매, 잎 등의 관상가치가 높은 관목 중심 공간에 대한 선호도가 높았으며 녹지와 휴식공간이 절충되어져 있는 정원형의 선호도가 높은 것으로 조사되어 휴식・녹지공간이 유기적으로 결합된 조성형태가 바람직한 것으로 판단되었다. 바닥포장재에 대한 선호도를 보면 식생을 포함한 바닥소재, 지압보도에 대해 높은 응답률을 보였으며 이는 녹지면적과 운동, 휴게 등의 이용면적의 기능을 동시에 충족시킬 수 있는 다기능적 조성방안의 중요성을 제시할 수 있겠다. 이용자 만족도 조사결과, 각 대상지별로 풍부한 녹지량을 선호하지만 꽃, 열매, 잎 등의 관상가치가 높은 키 작은 관목 중심 공간에 대한 만족도가 높은 것으로 나타났다. 또한, 옥상녹화 이용도를 높이기 위하여 벤치, 자판기, 수경시설, 운동시설 등의 휴게・여가・경관감상・운동 등 다양한 욕구를 충족시킬 수 있는 복합적 기능의 녹색공간 조성을 원하는 것으로 조사되었다. 과밀화된 도심에서 옥상녹화는 생태적, 환경적 측면에서 매우 중요한 역할을 수행하고 있다. 그러나 인간의 이용적인 측면을 고려하지 않고 단순한 피복 중심의 녹지 차원에서의 조성에는 한계가 있다. 녹지가 가지는 생태적, 환경적 측면의 효과뿐만 아니라 인간에게 주는 긍정적인 기능과 효과에 대한 이해를 통하여 보다 다양한 측면에서의 옥상녹화 조성에 대한 접근이 필요하다. 이에 본 연구는 오피스 건물의 옥상녹화 활성화를 위해 이용자들의 선호경향을 파악하였으며 이를 토대로 오피스 건물의 효과적인 옥상녹화 및 적극적 이용을 동시에 도모할 수 있는 방안마련을 위한 기초자료로 활용될 수 있을 것이다. 향후, 본 논문의 조사자료를 바탕으로 다양한 건물의 특성에 적합한 녹화구성요소, 이용자들의 요구사항에 부합된 프로그램을 적용, 다기능적 검증이 이루어질 수 있는 구체적인 후속연구가 이루어져야 할 것이다.
        218.
        2011.11 KCI 등재 서비스 종료(열람 제한)
        우리나라는 삼면이 바다로 이루어져 있으며 많은 철근콘크리트 구조물이 위치해 있다. 만약 철근콘크리트 구조물이 염해의 노출이 장기화 된다면 철근의 부식으로 인하여 철근-콘크리트 부착성능이 감소될 뿐만 아니라, RC 구조물의 성능저하가 우려되고 있다. 따라서 본 연구에서는 부착성능이 상실된 RC 보-기둥 접합부에 대한 기초자료를 확보하기 위해 연구를 수행하였다. 철근-콘크리트 부착이 상실된 보-기둥 접합부를 제작하여 부착 및 비부착 특성 여부에 따라 반복 횡하중 실험 및 해석적 연구를 수행하여 접합부의 성능을 평가 및 고찰하였다.
        220.
        2011.03 KCI 등재 서비스 종료(열람 제한)
        유연도법 기반의 공식화에서는 변위영역의 형상함수를 라그랑지언(Lagrangian)보간법에 의한 곡률로부터 횡방향 변위를 유도한다. 곡률변위보간법으로 유도한 매트릭스를 사용한 기하학적 비선형 해석방법과 강성도법을 기반으로 한 비선형 기존의 유한요소 해석 프로그램의 결과를 비교하여 적용이 가능함을 확인하였고, Spacone의 이론을 확장시켜 기하학적 비선형 거동을 예측할 수 있는 유연도법의 알고리즘을 제안하였다. 예제를 통하여 실제 문제에 대한 기하학적 비선형 해석을 수행하였다.
        11 12 13