A pregnancy diagnosis is an important standard for control of livestock’s reproduction in paricular dairy cattle. High reproductive performance in dairy animals is a essential condition to realize of high life-time production. Pregnancy diagnosis is crucial to shortening the calving interval by enabling the farmer to identify open animals so as to treat or re-breed them at the earliest opportunity. MicroRNAs are short RNA molecules which are critically involved in regulating gene expression during both health and disease. This study is sought to establish the feasible of circulating miRNAs as biomarkers of early pregnancy in cattle. We applied Illumina small-RNA sequencing to profile miRNAs in plasma samples collected from 12 non-pregnant cows (“open” cows: samples were collected before insemination (non-pregnant state) and after pregnancy check at the indicated time points) on weeks 0, 4, 8, 12 and 16. Using small RNA sequencing we identified a total of 115 miRNAs that were differentially expressed weeks 16 relative to non-pregnancy (“open” cows). Weeks 8, 12 and 16 of pregnancy commonly showed a distinct increase in circulating levels of miR-221 and miR-320a. Through genome-wide analyses we have successfully profiled plasma miRNA populations associated with pregnancy in cattle. Their application in the field of reproductive biology has opened up opportunities for research communities to look for pregnancy biomarker molecules in dairy cattle.

본 연구는 국내 자생하는 진달래속(Rhododendron) 종들의 종자 휴면유형 분류 및 발아특성 구명을 목표로 하였다. 진달래속 종들의 배는 형태적휴면(MD)이 없는 완전히 발달된 직선(linear) 형태였으며, 만병초 및 꼬리진달래 종자는 탈리 시점에 이미 휴면이 없는 것으로 밝혀졌다. 반면에 털진달래 종자는 population 수준에서 부분적으로 생리적휴면(PD)을 가지고 있는 것으로 나타났다. 털진달래의 이러한 생리적휴면 (PD)은 외생 지베렐린(GA3) 1,000mg･L-1 처리를 통해 타파될 수 있었다. 그러나 4℃에서의 저온층적처리는 털진달래 종자 휴면 타파에 효과가 없는 것으로 나타났다. 종합적으로 판단 했을 때, 진달래속(Rhododendron) 종들의 적정 발아 환경조 건은 광조건･25/15℃(만병초), 암조건･20/10℃(꼬리진달래), 광 조건･25/15℃(털진달래)로 확인된다. 진달래속(Rhododendron) 에서의 종간 차이(interspecific variation)로 인해 모든 종이 종자 휴면유형 또는 발아특성에서 구별이 되었다. 본 연구는 국내 자생하는 진달래속(Rhododendron) 종들의 생리･생태 특성을 이해하는 데 이용될 수 있을 것이다.

The content of harmful materials was investigated for coffee beans sold in Daejeon. Total 79 samples were analysed and 213 residual pesticides and 2 heavy metals were analysed simultaneously by GC-MS/MS, GC-NPD, GC-ECD, LC-MS/MS and ICP-MS. The instrumental method was validated with limit of detection (LOD), limit of quantification (LOQ), the linearity of standard curves. LOD of the residual pesticides was between 0.0003 to 0.0021 mg/kg, LOQ of the residual pesticides was between 0.0008 to 0.0064 mg/kg. LOD of the heavy metals was between 0.0077 to 0.0079 μg/kg, LOQ of the heavy metals was between 0.0233 to 0.0239 μg/kg. The linearity correlation coefficient for the calibration curve was between 0.9929 to 0.9999 and the recovery rate was between 95.4% to 106.1%. According to the monitoring of residual pesticides and heavy metals, no pesticide was detected in all coffee bean samples. 88.6% (70 samples) of analysed total 79 coffee beans contained at least 1 heavy metal but there was no sample which exceeded the maximum residual limit. Risk assessment was also carried out based on the content of heavy metals detected in coffee beans. The carcinogenic risk assessment to heavy metals showed that all cancer-risk (CR) values were below 10–6 and it meant that the CR due to heavy metals intake was evaluated as safe. The non-carcinogenic risk assessment to heavy metals showed that all hazard index (HI) were below 1, which was considered acceptable at the current level of exposure. The %PTWI values of lead and cadmium for 55 roasted coffee bean samples were 0.09% and 0.04% respectively, compared with the reference values. This results indicate that there is almost no health risk from heavy metal intake through the consumption of coffee beans in circulation in Daejeon.

This paper presents a Raman spectroscopy study of the influence of methane flow on the micro-tribological behavior of diamond-like carbon coatings deposited with an industrial plasma-enhanced chemical vapor deposition system. Results have shown a direct relationship between the methane flow and thickness of the coatings. The analysis of the Raman spectra and deposition parameters allowed establishing the influence of H content with the methane flow, the disorder level and estimation of the sp3 fraction on the carbon coatings. The micro-tribology tests showed a strong dependence of the wear resistance and hardness with Raman parameters. The coating deposited at 72-sccm methane flow presented a thickness of 1.7 μm and a sp3 fraction of 0.33. This sp3 fraction gave rise to a hardness of 24 GPa and an excellent wear resistance of 3.3 × 10–6 mm3 N−1 mm−1 for this DLC coating. Wear tests showed a swelling in the wear profiles on this coating, which was associated with the occurrence of a re-hybridization process.

Abstract Activated carbon from the shell of the cashew of Para (SCP) was produced by chemical activation with ZnCl using the ratio of SCP: ZnCl2 1.0:1.5 at 700 °C. The prepared activated carbon (SCP700) was used for the removal of two emerging contaminants, 4-bromophenol (4-BrPhOH) and 4-chloroaniline (4-ClPhNH2) that are primarily employed in the industry. Different analytical techniques were used to characterize the activated carbon. From the N2 adsorption–desorption isotherms were obtained the specific surface area of 1520 m2 g− 1 and total pore volume of 0.492 cm3 g−1. The functional groups were identified by the FTIR technique and quantified by modified Boehm titration. The results revealed the bearing of several functional groups on the SCP700 surface, which may utterly influence the removal of the emerging contaminants. The equilibrium experiments showed that the maximum uptaken capacities (Qmax) achieved at 45 °C were 488.2 (4-BrPhOH) and 552.5 mg g−1 (4-ClPhNH2). The thermodynamic parameters demonstrated that the processes of 4-BrPhOH and 4-ClPhNH2 adsorption are exothermic, spontaneous, energetically suitable, and the magnitude of ΔH° is compatible with physisorption. The mechanism of the adsorption of the emerging contaminants onto the carbon surface is dominated by microporous filling, hydrogen bonds, π-stacking interactions, and other Van der Waals interactions. The use of activated carbon for the treatment of industrial synthetic wastewater with several inorganic and organic molecules commonly found in industrial effluents showed a very high percentage of uptaking (up to 98.64%).

In this study, soybean oil, which is used in a large variety of processed foods, is used as a carbon source. Soybean oil is successfully coated onto the surface of LiNi1/ 3Co1/3Mn1/3O2 (NCM) by a simple method. The physical and electrochemical properties of NCM/C hybrid materials are determined. As a result, a 5 nm thickness carbon coating layer is formed on the surface of the NCM, resulting in improved capability and cyclic performance in the battery. The NCM/C battery shows an initial discharge capacity of 159 mAh g−1 and 95% capacity retention after 100 cycles (a discharge capacity of 120 mAh g−1 and 94% retention are observed after 100 cycles for the NCM cathode).

Iron and copper are practically immiscible in the equilibrium state, even though their atomic radii are similar. As non-equilibrium solid solutions, the metastable Fe-Cu alloys can be synthesized using special methods, such as rapid quenching, vapor deposition, sputtering, ion-beam mixing, and mechanical alloying. The complexity of these methods (multiple steps, low productivity, high cost, and non-eco-friendliness) is a hinderance for their industrial applications. Electrical explosion of wire (EEW) is a well-known and effective method for the synthesis of metallic and alloy nanoparticles, and fabrication using the EEW is a simple and economic process. Therefore, it can be potentially employed to circumvent this problem. In this work, we propose the synthesis of Fe-Cu nanoparticles using EEW in a suitable solution. The powder shape, size distribution, and alloying state are analyzed and discussed according to the conditions of the EEW.

자두수염잎벌(Monocellicampa pruni Wei, 1998) 유충은 자두(Prunus salicina Lindl)의 어린 과일 속에서 5령까지 경과하였다. 자두수염잎 벌 유충의 형태적 특징을 관찰한 결과, 원통형의 몸 구조, 구형의 머리, 4마디의 더듬이, 뚜렷한 발톱을 가진 가슴다리, I ~ VIII복부마디 등쪽에 5개의 주름이 있어 수염잎벌아과(Nematinae) 유충의 일반적인 형태적 특징을 공유하였지만, 첫번째 탈피 이후 복부끝다리(anal prolegs)가 사라진다는 점에서 Hoplocampa속의 유충과 차이를 보였다.

Spermatogonial stem cells are self-renewal and differentiate into sperm in post-pubertal mammals. There exists a balance between the self-renewal and differentiation in the testes. Spermatogonial stem cells make up only 0.03% of testicular cells in adult mice. These cells maintain sperm production by differentiating after puberty. Therefore, analyzing the expression of genes associated with spermatogenesis is critical for understanding differentiation. The present study aimed to establish the postnatal period of cells in relation to spermatogenesis. To study the expression of differentiated and undifferentiated marker genes in enriched spermatogonial stem cells, in vitro culture was performed and cells from pup (6–8-day-old) and adult (4-months-old) testicular tissues were isolated. As a result, undifferentiated genes, Pax7, Plzf, GFRa1, Etv5 and Bcl6b , were highly increased in cultured spermaotogonial stem cells compared with pup and adult testicular cells. On the other hands, differentiated gene, c-kit was highly increased in adult testicular cells, Also Stra8 gene was highly increased in pup and adult testicular cells. This study provides a better understanding of spermatogenesis-associated gene expression during postnatal periods.

We report the discovery of a giant exoplanet in the microlensing event OGLE-2017-BLG-1049, with a planet―host star mass ratio of q = 9.53 ± 0.39 × 10-3 and a caustic crossing feature in Korea Microlensing Telescope Network (KMTNet) observations. The caustic crossing feature yields an angular Einstein radius of θE = 0.52 ± 0.11 mas. However, the microlens parallax is not measured because the time scale of the event, tE ≃ 29 days, is too short. Thus, we perform a Bayesian analysis to estimate physical quantities of the lens system. We find that the lens system has a star with mass Mh = 0.55+0.36 -0.29 M⊙ hosting a giant planet with Mp = 5.53+3.62 -2.87 MJup, at a distance of DL = 5.67+1.11 -1.52 kpc. The projected star{planet separation is aㅗ = 3.92+1.10 -1.32 au. This means that the planet is located beyond the snow line of the host. The relative lens{source proper motion is μrel ~ 7 mas yr-1, thus the lens and source will be separated from each other within 10 years. After this, it will be possible to measure the flux of the host star with 30 meter class telescopes and to determine its mass.

Two waste forms, namely cement and geopolymer, were investigated and tested in this study to solidify the corrosive sludge generated from the surface and precipitates of the tubes of steam generators in nuclear power plants. The compressive strength of the cement waste form cured for 28 days was inversely proportional to waste loading (24.4 MPa for 0wt% to 2.7 MPa for 60wt%). The corrosive sludge absorbed the free water in the hydration reaction to decrease the cementation reaction. When the corrosive sludge waste loading increased to 60wt%, the cement waste form showed decreased compressive strength (2.7 MPa), which did not satisfy the acceptance criteria of the repository (3.45 MPa). Meanwhile, the compressive strength of the geopolymer waste form cured for 7 days was proportional to waste loading (23.6 MPa for 0wt% to 31.9 MPa for 40wt%). The corrosive sludge absorbed the free water in the geopolymer when the water content decreased, such that a compact geopolymer structure could be obtained. Consequently, the geopolymer waste forms generally showed higher compressive strengths than cement waste forms.

Currently, the cut flower market seems to be an export revenue in the world trade of the flower industry. The amount of exported cut flowers is impressive with increased production in various countries, especially in Korea. In the Fourth Industrial Revolution, automatic technologies are continuing to develop agricultural effective tools in the challenge of digital innovation. Thus, the low production costs set up in the field, greenhouse, or smart farm set up, and the short time of harvest must be considered within a few months. The postharvest quality of cut flowers presents freshness and long vase life, and the tools for postharvest handling are expected to optimize these. This review highlights the most important factors improving postharvest quality of cut flowers, the potential standard applicable techniques for commercial handling outlines of cut flower vase life, and recommendations for improving postharvest handling in the flower industry.

We investigated the cytotoxic potential of three different commercially available absorbent feminine hygiene products and one transdermal patch using direct contact and extract exposure methods. Two different cell lines were used – mouse fibroblast L929 and normal human skin fibroblast CCD-986sk cell lines. The test samples were extracted using three different methods in accordance to International Organization for Standardization (ISO). Viability of cells was analyzed using MTT assay and morphology of the cells were also observed using phase contrast microscopy. Overall, the direct contact method using L929 cells showed that all the test samples had no toxic effect when exposed to extracts for 1 h. For the exposure method, no toxic effect was observed in both L929 and CCD986sk cells incubated with all the test samples regardless of the extraction methods used.

Recently there was an incident that military radars, coastal CCTVs and other surveillance equipment captured a small rubber boat smuggling a group of illegal immigrants into South Korea, but guards on duty failed to notice it until after they reached the shore and fled. After that, the detection of such vessels before it reach to the Korean shore has emerged as an important issue to be solved. In the fields of marine navigation, Automatic Identification System (AIS) is widely equipped in vessels, and the vessels incessantly transmits its position information. In this paper, we propose a method of automatically identifying abnormally behaving vessels with AIS using convolutional autoencoder (CAE). Vessel anomaly detection can be referred to as the process of detecting its trajectory that significantly deviated from the majority of the trajectories. In this method, the normal vessel trajectory is gridded as an image, and CAE are trained with images from historical normal vessel trajectories to reconstruct the input image. Features of normal trajectories are captured into weights in CAE. As a result, images of the trajectories of abnormal behaving vessels are poorly reconstructed and end up with large reconstruction errors. We show how correctly the model detects simulated abnormal trajectories shifted a few pixel from normal trajectories. Since the proposed model identifies abnormally behaving ships using actual AIS data, it is expected to contribute to the strengthening of security level when it is applied to various maritime surveillance systems.

In this paper, we introduce a pilot's scheduling model which is able to maintain and balance their capabilities for each relevant skill level in military helicopter squadron. Flight scheduler has to consider many factors related pilot's flight information and spends a lot of times and efforts for flight planning without scientific process depending on his/her own capability and experience. This model reflected overall characteristics that include pilot's progression by basis monthly and cumulative flight hours, operational recent flight data and quickly find out a pinpoint areas of concern with respect to their mission subjects etc. There also include essential several constraints, such as personnel qualifications, and Army helicopter training policy’s constraints such as regulations and guidelines. We presented binary Integer Programming (IP) mathematical formulation for optimization and demonstrated its effectiveness by comparisons of real schedule versus model's solution to several cases experimental scenarios and greedy random simulation model. The model made the schedule in less than 30 minutes, including the data preprocessing process, and the results of the allocation were more equal than the actual one. This makes it possible to reduce the workload of the scheduler and effectively manages the pilot's skills. We expect to set up and improve better flight planning and combat readiness in Korea Army aviation.