When decommissioning a nuclear power plant, the structure must be made to a disposable size. In general, the cutting process is essential when dismantling a nuclear power plant. Mainly, thermal cutting method is used to cutting metal structures. The aerosols generated during thermal cutting have a size distribution of less than 1 μm. The contaminated structures are able to generate radioactive aerosols in the decommissioning. Radioactive aerosols of 1 μm or less are deposited in the respiratory tract by workers’ breathing, causing the possibility of internal exposure. Therefore, workers must be protected from the risk of exposure to radioactive aerosols. Prior knowledge of aerosols generated during metal cutting is important to ensure worker safety. In this study, the physical and chemical properties of the aerosol were evaluated by measuring the number and mass concentrations of aerosols generated when cutting SUS304 and SA508 using the laser cutting method. High-resolution aerosol measuring equipment (HR-ELPI+, DEKATI) was used to measure the concentration of aerosols. The HR-ELPI+ is an impactor-type aerosol measuring equipment that measures the aerosol number concentration distribution in the aerodynamic diameter range of 6 nm to 10 um in real-time. And analyze the mass concentration of the aerosol according to the diameter range through the impactor. ICP-MS was used for elemental mass concentration analysis in the aerosol. Analytical elements were Fe, Cr, Ni and Mn. For the evaluation of physical and chemical properties, the MMAD of each element and CMAD were calculated in the aerosol distribution. Under the same cutting conditions, it was confirmed that the number concentration of aerosols generated from both materials had a uni-modal distribution with a peak around 0.1 um. CMAD was calculated to be 0.072 um for both SUS304 and SA508. The trend of the CMAD calculation results is the same even when the cutting conditions are changed. In the case of MMAD, it was confirmed that SUS304 had an MMAD of around 0.1 μm in size for only Fe, Cr and Mn. And SA508, Fe, Cr, Ni and Mn were all confirmed to have MMAD around 0.1 μm in size. The results of this study show that a lot of aerosols in the range of less than 1 μm, especially around 0.1 μm in size, are generated when metal is cut using laser cutting. Therefore, in order to protect the internal exposure of workers to laser metal cutting when decommissioning NPPs, it is necessary to protect from nano-sized aerosols beyond micron size.

Foot-and-mouth disease (FMD) is a highly contagious vesicular disease that affects cloven-hoofed animals, causing substantial economic losses to the livestock industry. The causative FMD virus (FMDV) comprises four structural proteins (VP1, VP2, VP3, and VP4) and several non-structural proteins. Among the capsid proteins, VP4 is the most conserved, making it an attractive target as a diagnostic and vaccine antigen, regardless of FMDV serotype. In this study, we attempted to express the VP4 protein N-terminally fused to a glutathione S-transferase (GST) tag in Escherichia coli. Whereas VP0 and VP2 proteins were expressed in the soluble fraction, we failed to detect VP4, even in the insoluble fraction. To investigate the effect of VP4 C-terminal amino acid residues on protein expression, we constructed three VP4 mutants fused to GST, among which the mutant in which the C-terminal 15 amino acid residues had been deleted showed the highest level of protein expression. Furthermore, protein expression was observed even in the mutant in which three amino acid residues (DKK) had been fused to the C terminus. However, unlike the other two mutants, the wild-type VP4 mutant was poorly expressed, thereby indicating that the C-terminal amino acid residues could play a pivotal role in determining expression of the VP4 protein in E. coli.

Background: The PyeongChang 2018 Winter Paralympic Games (WPG) being one of the most successful Paralympic Games (PG) in modern athletic world history, hosted the largest number of elite athletes representing 49 National Paralympic Committees (NPCs). Objects: The present investigation highlighted the demographic and clinical characteristics of injured athletes and non-athletes and the physiotherapy services provided during the PyeongChang 2018 WPG. Methods: Prospective descriptive epidemiology study, in which the study group comprised of 201 participants (51 athletes and 150 non-athletes) who were admitted to and utilized the polyclinic physiotherapy service of 2018 PyeongChang WPG in Physiotherapy Department of Paralympic Village from March 1, 2018 to March 20, 2018. Results: Qualitative frequency analysis of injury type demonstrated highest number of chronic injuries (51%, n = 100) in athletes and non-athletes. Anatomical injury site analysis revealed that the spine and shoulder areas were affected with equal frequency for athletes (54.9%, n = 14), whereas for non-athletes, the frequencies of spine and shoulder area injuries were 36.7% (n = 55) and 26% (n = 39), respectively. The Pyeongchang WPG showed a high rate of athletes visiting the physiotherapy service during the pre-competition period (33.3%, n = 50), which may have led to smaller incidence rate of traumatic injury. The physiotherapy treatment service analysis demonstrated that manual therapy (35.4%, n = 230) was most commonly utilized, followed by transcutaneous electrical nerve stimulation/interference current therapy (TENS/ICT), therapeutic massage and therapeutic exercise. Conclusion: We established the importance of prophylactic and preventive physiotherapy services to reduce the risk of sports injuries during WPG.

Background: The presence of the lumbopelvic-hip neuromuscular chain is essential for dynamic spinal stabilization; its therapeutic effects on dynamic movements of the distal extremity segment and underpinning motor mechanism remain unknown and warrant further study on participants with low back pain (LBP). Objects: We aim to compare the effects of the broken chain exercise (BCE) and connected chain exercise (CCE) on electromyography (EMG) amplitude and onset time in participants with and without LBP. Methods: Randomized controlled clinical trial. A convenience sample of 40 nonathletic participants (mean age: 24.78 ± 1.70) with and without LBP participated in this study. All participants underwent CCE for 30 minutes, 30-minute daily. We measured EMG amplitude and onset times on bilateral erector spinae (ES), gluteus maximus (GM), hamstring (HAM), transverse abdominis (TrA), internal oblique (IO), and external oblique (EO) during the prone hip extension (PHE) test before and after the BCE and CCE. We used multivariate analysis of variance (MANOVA) to analyze the amplitude and onset time difference between exercises (BCE and CCE) and Pearson’s correlations to determine any synergistic relationship among the HAM, GM, bilateral TrA/IO, and ES muscles. The statistical analyses were used at p < 0.05. Results: MANOVA showed that CCE was more decreased on EMG amplitude in HAM and bilateral ES, while increased GM and contralateral TrA/IO than BCE (p < 0.05). MANOVA EMG onset time data analyses revealed that the main effect of the conditions was significant for all HAM, GM, and bilateral ES muscles, whereas the main effect for the group was significant only for GM and contralateral ES in healthy and LBP groups. Pearson’s correlation coefficient was computed to assess the relationship between BCE and CCE on dependent variables. In most of the muscles, there was a strong, positive correlation between the two variables, and there was a significant relationship (p < 0.001). Conclusion: CCE produced more effective and coordinated core stabilization and motor control mechanism in the lumbopelvic-hip muscles in participants with and without LBP during PHE than BCE.

Background: The oxygen uptake efficiency slope (OUES) is the most important index for accurately measuring cardiopulmonary function in patients with acute ischemic heart disease. However, the relationship between the OUES variables and important cardiopulmonary function parameters remain unelucidated for patients with acute ischemic heart disease, which accounts for the largest proportion of heart disease. Objects: The present cross sectional clinical study aimed to determine the multiple relationships among the cardiopulmonary function variables mentioned above in adults with acute ischemic heart disease. Methods: A convenience sample of 110 adult inpatients with ischemic heart disease (age: 57.4 ± 11.3 y; 95 males, 15 females) was enrolled at the hospital cardiac rehabilitation center. The correlation between the important cardiopulmonary function indicators including peak oxygen uptake (VO2 peak), minute ventilation (VE)/carbon dioxide production (VCO2) slope, heart rate recovery (HRR), and ejection fraction (EF) and OUES was confirmed. Results: This study showed that OUES was highly correlated with VO2 peak, VE/VCO2 slope, and HRR parameters. Conclusion: The OUES can be used as an accurate indicator for cardiopulmonary function. There are other factors that influence aerobic capacity besides EF, so there is no correlation with EF. Effective cardiopulmonary rehabilitation programs can be designed based on OUES during submaximal exercise in patients with acute ischemic heart disease.

Non-destructive estimation of leaf area is a more efficient and convenient method than leaf excision. Thus, several models predicting leaf area have been developed for various horticultural crops. However, there are limited studies on estimating the leaf area of strawberry plants. In this study, we predicted the leaf areas via nonlinear regression analysis using the leaf lengths and widths of three-compound leaves in five domestic strawberry cultivars (‘Arihyang’, ‘Jukhyang’, ‘Keumsil’, ‘Maehyang’, and ‘Seollhyang’). The coefficient of determination (R2) between the actual and estimated leaf areas varied from 0.923 to 0.973. The R2 value varied for each cultivar; thus, leaf area estimation models must be developed for each cultivar. The leaf areas of the three cultivars ‘Jukhyang’, ‘Seolhyang’, and ‘Maehyang’ could be non-destructively predicted using the model developed in this study, as they had R2 values over 0.96. The cultivars ‘Arihyang’ and ‘Geumsil’ had slightly low R2 values, 0.938 and 0.923, respectively. The leaf area estimation model for each cultivar was coded in Python and is provided in this manuscript. The estimation models developed in this study could be used extensively in other strawberry-related studies.

Despite having a low electrical conductivity, graphene oxide (GO) is used as an anode material in lithium-ion batteries (LIBs) owing its good processability in large quantities. GO is reduced by chemical or thermal treatments to enhance its electrical conductivity. In this study, high-performance GO anodes with polydopamine (PDA) and polyethylenimine (PEI) as binders were fabricated. Gamma (γ)-ray irradiation was applied to the GO–PDA–PEI hybrid sheets to covalently cross-link the GO sheets and binders with an amide bond. The covalent crosslinking was confirmed by Fourier-transform infrared spectroscopy analysis. Further, X-ray photoelectron spectroscopy results showed that γ-ray irradiation produced a reduced GO sheet, which resulted in an increase in the electrical conductivity by 30%. By characterizing the electrochemical properties, we found that the γ-ray irradiation facilitates the stability and increases the charge/discharge capacity by crosslinking GO and PDA–PEI binders and reducing the GO sheets.

In this study, microstructural characteristics and constituent elements of fiberglass splint and cast are examined using a scanning electron microscope and an energy dispersive X-ray spectrometer. As observed by the scanning electron microscope, fiberglass splint and cast had a porous structure with many bundles of fiberglass textures well assembled. Spaces between bundles of the fiberglass splint are triangular or elliptical shaped and the long-axis diameter is measured at about 1 mm. The thickness of fiber bundles covered with plaster is measured at 600 μm and the diameter of a single strand of fiberglass is up to 10 μm. The thickness of the fiberglass bundle of the fiberglass splint is measured at about 700 μm. Spaces between bundles are formed in the shape of triangles with gentle edges and long-axis diameter of up to 1.4 mm, which is larger than that of the splint. The thickness of a single strand of fiberglass of the plaster-coated cast is 11.5 μm, which is thicker than that of fiberglass of the splint. As a result of analyzing constituent elements of the fiberglass cast and the splint with an energy dispersive X-ray spectrometer, Ca, Si, and Al components are identically detected. This result shows that the fiberglass cast has a smoother surface with hardened plaster than the fiberglass splint. The thickness of the fiberglass bundle and the thickness of a single strand of the fiberglass are also larger than those of the fiberglass splint.

Background: Robot-assisted gait training (RAGT) is an effective method for walking rehabilitation. Additionally, the body weight support (BWS) system reduces muscle fatigue while walking. However, no previous studies have investigated the effects of RAGT with BWS on isokinetic strength of quadriceps and hamstring muscles. Objects: The purpose of this study was to investigate the effects of torque, work, and power on the quadriceps and hamstring muscles during RAGT, using the BWS of three conditions in healthy subjects. The three different BWS conditions were BWS 50%, BWS 20%, and full weight bearing (FWB). Methods: Eleven healthy subjects (7 males and 4 females) participated in this study. The Walkbot_S was used to cause fatigue of the quadriceps and hamstring muscles and the Biodex Systems 4 Pro was used to measure the isokinetic torque, work, and power of them. After RAGT trials of each of the three conditions, the subjects performed isokinetic concentric knee flexion and extension, five at an angular velocity of 60°/s and fifteen at an angular velocity of 180°/s. One-way repeated analysis of variance was used to determine significant differences in all the variables. The least significant difference test was used for post-hoc analysis. Results: On both sides, there were significant differences in peak torque (PT) of knee extension and flexion between the three BWS conditions at an angular velocity of 60°/s and 180°/s conditions. A post-hoc comparison revealed that the PT in the BWS 50% was significantly greater than in the BWS 20% and the FWB and the PT in the BWS 20% was significantly greater than in the FWB. Conclusion: The results of this study suggest that the lower BWS during RAGT seems to lower the isokinetic torque, work, and power of the quadriceps and hamstring muscles because of the muscle fatigue increase.

Background: While the formal test has been used to provide a quantitative measurement of core stability, studies have reported inconsistent results regarding its test-retest and intraobserver reliabilities. Furthermore, the validity of the formal test has never been established. Objects: This study aimed to establish the concurrent validity and test-retest reliability of the formal test. Methods: Twenty-two young adults with and without core instability (23.1 ± 2.0 years) were recruited. Concurrent validity was determined by comparing the muscle thickness changes of the external oblique, internal oblique, and transverse abdominal muscle to changes in core stability pressure during the formal test using ultrasound (US) imaging and pressure biofeedback, respectively. For the test-retest reliability, muscle thickness and pressure changes were repeatedly measured approximately 24 hours apart. Electromyography (EMG) was used to monitor trunk muscle activity during the formal test. Results: The Pearson’s correlation analysis showed an excellent correlation between transverse abdominal thickness and pressure biofeedback unit (PBU) pressure as well as internal oblique thickness and PBU pressure, ranging from r = 0.856–0.980, p < 0.05. The test-retest reliability was good, intraclass correlation coefficient (ICC1,2) = 0.876 for the core stability pressure measure and ICC1,2 = 0.939 to 0.989 for the abdominal muscle thickness measure. Conclusion: Our results provide clinical evidence that the formal test is valid and reliable, when concurrently incorporated into EMG and US measurements.