이 논문에서는 내구성이 우수한 것으로 알려져 있는 펄트루젼 FRP의 습도 노출 및 동결 융해 영향을 검토하고, 이에 따른 국부좌굴강도 영향을 검토하기 위한 해석적 연구를 수행하였다. FRP는 일반적으로 내구성이 우수하다고 알려져 있기 때문 에, 해양 구조물 등 습윤환경에서 적용하기 위한 다양한 연구가 진행되고 있으며, 특히 구조용 부재로 제작되는 펄트루젼 FRP 부재는 하절기와 동절기의 온도변화에 노출되기 때문에 이에 대한 검토가 필요하다. 펄트루젼 FRP의 습도 노출 및 동결 융해 영향은 기존 연구의 실험 결과를 참고하였으며, 국부좌굴강도는 정밀해법을 통해 영향을 검토하였다. 검토 결과 펄트루젼 FRP 는 습도노출 및 동결융해의 영향으로 인해 최대 약 20%의 인장강도 및 탄성계수 변화를 나타내었으나, 국부좌굴강도는 약 3% 로 그 영향이 상대적으로 작은 것으로 나타났다. 따라서, 온도이력 및 습윤환경에서도 펄트루젼 FRP는 국부좌굴강도의 큰 변화 를 나타내지 않고 높은 내구성을 나타낼 수 있을 것으로 판단된다.

이 논문에서는 기존의 조인트 교량을 일체식 교대 교량으로 변경할 경우, 온도하중에 의한 상부구조의 인장에 따른 흉벽의 휨거동을 보강하기 위한 흉벽 FRP 보강공법을 제안하고, 설계 및 유한요소해석을 통해 보강 효과를 검토하였다. FRP 보 강재는 펄트루젼 공정으로 제작하며, 흉벽 전면부에 부착하여 일체식 교대 교량으로 변경할 때, 흉벽에 부족한 인장철근의 역할 을 대체하게 된다. 흉벽 FRP 보강공법의 설계는 ACI Committee 440을 참고하여 수행하였으며, 유한요소해석은 콘크리트, 철근 및 유리섬유와 비닐에스터로 제작한 FRP 보강재의 최대응력을 보강 방법에 따라 비교하였다. 유한요소해석 결과, FRP 보강재는 콘크리트에 발생하는 인장응력을 감소시키는 역할을 하며, 흉벽이 저항할 수 있는 휨모멘트를 증가시킬 수 있는 것으로 나타났 다.

Atomic layer etching (ALE) is a promising technique with atomic-level thickness controllability and high selectivity based on self-limiting surface reactions. ALE is performed by sequential exposure of the film surface to reactants, which results in surface modification and release of volatile species. Among the various ALE methods, thermal ALE involves a thermally activated reaction by employing gas species to release the modified surface without using energetic species, such as accelerated ions and neutral beams. In this study, the basic principle and surface reaction mechanisms of thermal ALE?processes, including “fluorination-ligand exchange reaction”, “conversion-etch reaction”, “conversion-fluorination reaction”, “oxidation-fluorination reaction”, “oxidation-ligand exchange reaction”, and “oxidation-conversion-fluorination reaction” are described. In addition, the reported thermal ALE processes for the removal of various oxides, metals, and nitrides are presented.

‘Tracers’ are bullets that emit light at the backside so that the shooter can see the trajectory of their flight. These light-emitting bullets allow snipers to hit targets faster and more accurately. Conventional tracers are all combustion type which use the heat generated upon ignition. However, the conventional tracer has a fire risk at the impact site due to the residual flame and has a by-product that can contaminate the inside of the gun and lead to firearm failure. To resolve these problems, it is necessary to develop non-combustion-type tracers that can convert heat to luminance, so-called ‘thermoluminescence (TL)’. Here, we highly improve the thermoluminescence properties of MgB4O7 through co-doping of Dy3++Ce3+ and Dy3++Na+. The presence of doping materials (Dy3+, Ce3+, Na+) was confirmed by XPS (X-ray photoelectron spectroscopy). The as-synthesized co-doped MgB4O7 was irradiated with a specific radiation dose and heated to 500 °C under dark conditions. Different thermoluminescence characteristics were exhibited depending on the type or amounts of doping elements, and the highest luminance of 370 cd/m2 was obtained when Dy 10 % and Na 5 % were co-doped.

This study investigated the rocking behavior of unreinforced masonry walls and wall piers under cyclic loading. Based on the benchmark tests, the characteristics of load-deformation relations in masonry walls with rocking failure were captured, focusing on observed deformation modes. The rocking strengths of masonry walls (i.e., peak and residual strengths) were evaluated, and the effects of opening configurations on the masonry wall strength were examined. The deformation capacity of the rocking behavior and the hysteresis shape of the load-deformation relations were also identified. Based on the results, modeling approaches for the rocking behavior of masonry walls were discussed.

This study investigated variables for improving adhesive strength using laser surface treatment when bonding dissimilar materials using adhesives. adhesive strength analysis was performed for CFRP and Al6061 by laser irradiation intensity, and surface roughness was measured to analyze the related results. In the case of CFRP, the adhesive strength was good when the surface was not treated. In the case of Al6061, the adhesive strength was 25 MPa when the surface was treated with 20W, the maximum output of the laser surface treatment equipment, and the adhesive strength was improved by 125% compared to the untreated specimen. In addition, by measuring the surface roughness in the experiment, it was confirmed that the higher the surface roughness, the better the adhesive strength.

For the assessment of the benthic community health of Jinhae Bay using the Benthic Pollution Index, macrobenthic fauna samples were seasonally collected from 23 different sites between February, 2011 and November, 2012. The macrobenthic community health status was classified as “Poor” or “Very Poor” except for the bay mouth part of Jinhae Bay at the northern part of Geoje Island. A large proportion of functional Group IV and even azoic conditions appeared due to summer hypoxia at sites in sheltered regions of Jinhae Bay. Some of the dominant species recruited after summer hypoxia were Paraprionospio patiens, Sigambra bassi, and Theora fragilis belong to typical opportunistic species. By comparing the BPI values of the macrobenthic communities from other special management areas of Korea, Jinhae Bay was considered to have the lowest condition that was heavily polluted among special management areas.

Climate change due to global warming causes a rise in atmospheric air temperature to rise and extreme shift in precipitation patterns. Carbon dioxide (CO2) is widely known as one of the major cause of global warming and accounts for about 72% of total greenhouse gas emissions. Agriculture is more vulnerable to climate change than other industries. Many studies have been conducted to investigate how agroecosystems, both natural and controlled, will respond to the rising level of CO2. Studies on the responses of crops and agricultural environments to climate change are crucial in predicting changes in agro-ecosystems. Research facilities for various types of CO2 treatment have been developed. The representative research facilities are SAR (Soil-Plant-Atmosphere-Research), OTC (Open Top Chamber), FACE (Free Air CO2 Enrichment System), and TGC & CTGC (Temperature Gradient Chamber & CO2-Temperature Gradient Chamber). Therefore, this study reviewed research data and their application in agriculture.

양파 종자는 양파 생산을 위한 기초적 투입자원이기 때문에 건전한 종자는 양파 생산에서 매우 중요하다. 양파 종자에서 분리한 박테리아 중에서 양파 종자 발아를 억제하는 균주 OS1을 분리하였다. 분자 동정을 위해 16S rRNA 유전자 영역의 DNA를 분석하였고 이를 바탕으로 한 유연관계 분석을 통해 OS1 균주를 Leclercia adecarboxylata로 동정하였다. L. adecarboxylata는 면역 저하 환자 또는 기저 질환이 있는 환자에게 기회감염을 일으키는 것으로 알려져 있다. L. adecarboxylata OS1은 휘발 물질을 생산하고 이 휘발 물질이 양파 종자 발아를 억제하는 것으로 분석하였다. 특히, 양파 구근을 이용한 병원성 검정에서도 L. adecarboxylata OS1는 갈변증상과 썩음증상을 유발하였다. 아직 L. adecarboxylata에 의한 대규모 포장 또는 수확후병으로 인한 양파 피해사례가 보고된 적은 없지만, 이러한 결과는 L. adecarboxylata는 잠재적인 양파 병원체가 될 수 있음을 시사하고 양파 생산에 잠재적 위협 요소가 될 가능성을 보여준다. 또한, L. adecarboxylata는 인체 기회감염 병원체이기 때문에 양파로부터 언제든지 인체로 감염될 수 있는 위험성을 갖고 있다고 볼 수 있다.

Paddy fields are important habitats for maintaining the biodiversity of agricultural ecosystems. Recently, as the need for safe food and biodiversity conservation has increased, the rice cultivation methods have undergone changes. This study was conducted to investigate the fish fauna in Environmentally Friendly Paddy fields (EFP) and Conventional Paddy fields (CP), and compare the characteristics of Misgurnus anguillicaudatus and Aphyocypris chinensis populations in EFP and CP. A total of 2,703 fish were collected and classified into six families and 13 species. Our results showed that there was a difference in the proportion of fish populations in the two paddy fields, and the number of individuals in EFP was higher than in CP. The weight values of M. anguillicaudatus were higher in EFP than in CP, and the total length, body length, and weight values of A. chinensis were higher in EFP than in CP. Conditional factor (K) values also showed similar trends in EFP and CP. Our results indicate that the farming practices in paddy fields have a significant effect on the characteristics of M. anguillicaudatus and A. chinensis populations, and the results of this study can be used as basic data for securing biodiversity in future agricultural ecosystems.

이 논문에서는 교량받침 교체를 위한 에폭시 주입 공법을 제시하였다. 에폭시 주입 공법의 성능 평가를 위하여, 에 폭시 주입성 실험 및 통공앵커의 인발실험을 수행하였다. 에폭시 주입성 실험은 빈 공간을 갖고 있는 콘크리트 블록 내에 통공 앵커를 이용하여 에폭시를 주입하고, 콘크리트 블록을 절단한 후, 주입성능을 육안으로 관찰하였다. 또한, 인발실험은 2가지 형태의 통공앵커를 콘크리트 블록 내에 삽입하여 수행하였으며, 2가지 형태의 통공앵커에 대한 인발실험 결과를 비교하고, 케 미컬 앵커의 인발강도와도 비교하였다. 실험 결과 통공앵커는 교량받침 교체공사를 위한 에폭시 주입성과 인발성능이 우수한 것으로 나타났다.

In this study, centrifuge model tests were performed to evaluate the seismic response of multi-DOF structures with shallow foundations. Also, elastic time history analysis on the fixed-base model was performed and compared with the experimental results. As a result of the centrifuge model test, earthquake amplification at the fundamental vibration frequency of the soil (= 2.44 Hz) affected the third vibration mode frequency (= 2.50 Hz) of the long-period structure and the first vibration mode (= 2.27 Hz) of the short-period structure. The shallow foundation lengthened the periods of the structures by 14-20% compared to the fixed base condition. The response spectrum of acceleration measured at the shallow foundation was smaller than that of free-field motion due to the foundation damping effect. The ultimate moment capacity of the soil-foundation system limited the dynamic responses of the multi-DOF structures. Therefore, the considerations on period lengthening, foundation damping, and ultimate moment capacity of the soil-foundation system might improve the seismic design of the multi-DOF building structures.