The number of dismantled nuclear facilities is increasing globally. Dismantling of nuclear facilities generates large amount of waste such as concrete, soil, and metal. Concrete waste accounts for 70% of the total amount of waste. Since hundreds of thousansds of tons of concrete waste generated, securing technology of reduction and recycling of waste is emerging as a very important issue. The objective of this study is to synthesize geopolymer using inorganic materials from cement fine powder in concrete waste. Dismantled concrete waste contains a large amount of calcium silicate hydrate(C-S-H), Ca(OH)2, SiO2, etc., which is an inorganic material required for the synthesis of geopolymer. SiO2 affects the compressive strength of the geopolymer and Ca(OH)2 affects the curing rate. A high concentration of alkali solution is used as an alkali activator, and alkali activator is necessary for the polymerzation reaction of metakaolinite. The experiment consists of three steps. The first step is to react with concrete waste and hydrochloric acid to extract ions. In the solid after filtration, SiO2 and Al2O3 are composed of 84.10%. It can be used instead of commercial SiO2 required for the synthesis of geopolymer. The second step is to add NaOH up to pH 10, impurities can be removed to extract Ca(OH)2 with high purity. The final step is to add NaOH up to pH 13, and Ca(OH)2 extraction. The alkali solution generated after the last reaction can be recycled into an alkali activator during the synthesis of the geopolymer. If dismantled concrete waste is recycled during geopolymer synthesized, the volume reduction rate of dismantled concrete waste is more than 50%. If you put the radioactive waste in the recycled solidification materials synthesis from concrete waste by dismantling of nuclear facilities, it is possible to reduce the amount of waste generated and disposal costs.

Kori-1, the nuclear power plants in South Korea, first started operation in April 1978 and was suspended permanently in 2017. The saturation rate time of spent nuclear fuel generated by major nuclear power plants operating in Korea are getting closer. If we fail to dispose spent nuclear fuel, which is equivalent to high-level radioactive waste, the nuclear power plants will have to be shutdown. High-level radioactive waste is permanently disposed through a deep geological disposal system because it contains long-term half-life nuclides and emits high energy. To select the deep geological disposal site and construct the disposal facilities, it is necessary to establish appropriate regulatory policies accordingly. The status of database construction in OECD-NEA, NRC, SITEX, and IAEA, which provides safety regulations for deep geological disposal system, stipulates each requirement for dismantling nuclear power plants. However, details such as specific figures are not specified, and guidelines for the disposal of high-level radioactive wastes are not clearly distinguished. In Korea, the CYPRUS program, an integrated database system, has been developed to support comprehensive performance evaluation for high-level waste disposal. However, due to several difficult situations, maintenance and upgrades have not been performed, so the research results exist only in the form of raw data and the new research results have not been reflected. Other than that, there is no preemptive basis for regulating the deep geological disposal system. With real-time database, we can develop a regulatory system for the domestic deep disposal system by systematically analyzing the regulatory condition and regulatory case data of international organizations and foreign leading countries. The database system processed and stored primary data collected from nuclear safety reports and other related data. In addition, we used relational database and designed table to maximize time and space efficiency. It is provided in the form of a web service so that multiple users can easily find the data they want at the same time. Based on these technologies, this study established a database system by analyzing the legal systems, regulatory standards, and cases of major foreign leading countries such as Sweden, Finland, the United States, and Japan. This database aims to organize data for each safety case component and further prepare a safety regulatory framework for each stage of development of disposal facilities suitable for the domestic environment.

Chlorine dioxide (ClO2) has recently emerged as an ideal disinfectant and has shown a wide range of antimicrobial activities in various pathogenic microorganisms. In this study, the virucidal effect of ClO2 at low concentration (0.02 ppm) and higher concentration (0.06 – 0.09 ppm) against Adenovirus and Herpesvirus was evaluated based on the NF T 72-281 and ASTM 1053-11 standard methods at different exposure times. The virus suspension was dried onto the carrier and then exposed to gaseous ClO2 (gClO2) at 22 ± 2∘C. For Adenovirus, exposure at a low concentration of ClO2 at the middle height resulted in the average log10 reduction of 0.95, 2.65, and 5.30 after 1, 3, and 6 h post-exposure (pe), respectively. Moreover, more than 4-log10 reduction was achieved at 4 and 6 h pe with higher concentrations of ClO2. On the other hand, the antiviral activity of gClO2 at the middle height was also effective against Herpesvirus. In particular, at 1 h pe, a less than 4-log10 reduction was observed at all examined concentrations of ClO2, whereas exposure for 3 and 6 h (with low concentration) or 2 h (with higher concentration) inactivated completely viruses attached to the carrier. These results suggested that ClO2 fumigation is a potential alternative method for disinfecting healthcare facilities, high-containment laboratories, and households with a safe concentration for human health.

To reduce the air pollution from maritime activities, which is proven to have severe impacts on the worldwide environment and human health, many international regulations have been established. Therefore, an effective political strategy and a complete inventory of emissions are needed to control atmospheric ship pollution and comply with these international standards. The purpose of this study is to calculate the amount of emission in three operating modes (cruising, maneuvering, and hoteling) for some main pollutants emitted from container ships and trucks operating in Daesan port in Korea based on bottom-up methodology. The results showed that the volume of air pollution of about 6,500 tons from container ships and 1,455 tons from container trucks were emitted in Daesan port area. Also, a total of 4 billion won (about 3.6 billion won from container ships, and about 400 million won from container trucks) was estimated.

Considering the characteristics of nuclear power plants in order to decommission nuclear power plants safely and economically, this thesis provides a methodology for optimizing the technology for developing decommissioning characteristic evaluation system using simulation technology for core facilities of the plants based on 3D that reflects various factors. The results of pollution assessment and radiation assessment for the Kori Unit 1 reactor building, auxiliary building, and each major device are displayed in 3D drawings and viewer, and the radiation dose rate and radiation assessment results are displayed separately for each major location. Furthermore, this D/B development method which includes inserting result values of characteristic evaluation and the quantity of waste is one of the main technology to optimize the system which enables users to select decommissioning processes and predict the quantity of waste. (Refer to the presented 3D models of the containment building, D/B, tag search module, the scale calculation result of models after visualizing the result value of 3D based decommissioning characteristic evaluation) The methodology for optimizing decommissioning characteristic evaluation result value DB development system using 3D models of the first major nuclear power plant allows the display of decommissioning characteristic values in virtual reality, the selection of decommissioning process, the establishment of the decommissioning procedure. Hence, this study is expected to provide reliable guidelines for managing a decommission business efficiently in the near future and can be used in the related field if needed.

As the number of aging nuclear power plants increases, the market for dismantling nuclear power plants is growing rapidly. About 40% of the cost of dismantling nuclear power plants is the waste treatment cost incurred during the dismantling process, of which concrete waste accounts for a significant portion of the total waste. Securing technology for reducing and recycling concrete waste is very important not only in terms of economy but also in terms of environment. The objective is to synthesize geopolymer using inorganic materials from cement fine powder in concrete waste. Cement fine powder in concrete waste has a large amount of inorganic elements necessary for filing materials for radioactive waste treatment such as CaO and SiO2. In particular, Ca(OH)2 is synthesized by extracting Ca2+ from concrete waste. It can be used as an alkali activator to synthesize geopolymer. The mortar from crushed concrete was used as a source of calcium. The first step is to react with concrete waste and hydrochloric acid to extract ions. The second step is to react with NaOH and synthesize Ca(OH)2. The product was divided into two stages according to the reaction method and order. The first and second products were washed and dried, and then XRD and XRF were performed. The second product was matched only Ca(OH)2 and CaCO3 at the XRD peak. In the case of XRF, it was analyzed to have a purity of 67.80–78.73%. Synthesis of geopolymer by recycling materials extracted from concrete waste can reduce disposal costs and improve the utilization rate of disposal sites.

We investigated the effect of a synthetic complement peptide C3a on the outcome of Brucella abortus 544 infection in a murine macrophage cell line RAW264.7 cell. First, we determined the highest non-cytotoxic concentration of the peptide in the cell line. We also found that the peptide significantly increased the growth of the bacteria at 8 and 24 h. Although the number of bacterial CFU was also elevated at 48 and 72 h, the increases were not significant as compared to controls. We further investigated the effect of C3a peptide on the growth of Brucella by pre-incubating the peptide at various temperatures and found that the effect was reversed at 24 h post-incubation suggesting that incubation of peptide at high temperatures including 65°C or 95°C could inactivate its action. This also could indicate the beneficial effect of high temperature during infection. Although several studies reported the inhibitory effect of different antimicrobial peptides including C3a, the present study preliminarily revealed that it had no positive contribution on the control of B. abortus 544 infection in vitro and indirectly to its receptor, CD88, which belongs to GPCR. Moreover, the encouraged further exploration of the effect of other similar peptides would be performed for the purpose of finding Brucella-host cell interaction for the control of disease progression.