This study evaluated the effect of steel slag and steel wool fibers (SWF) on self-healing performance of asphalt mixture. The microstructure and distribution of SWF in mixture were examined by a computerized tomography scan and image analysis program. Thermal conductivity was investigated using the thermal constant analyser. The heating rate and healing performance were measured by induction heating system. The results showed the uneven distribution and the agglomeration in the mixtures when the content of fibers exceed a certain dosage. It was found that the mix with steel slag had higher heating rate than the mix with normal aggregate; however, its healing performance was slightly lower because of the breaking of weak steel slag. Finally, the mechanical test results indicated that SWF can enhance the resistance and prolong the fatigue life of asphalt mixtures.

The citrus leaf miner (CLM) is an important citrus pest. A thorough understanding of the biology and population dynamics of CLM are essential for development of reliable pest population prediction system. We investigated the developmental periods of the species under ten constant temperature schemes (12.5℃~39℃). Furthermore, we established a development model of CLM, based on the result of a laboratory experiment. The immature developmental duration of CLM at constant temperatures were 63.5 days at 15℃, 23.9 days at 21℃, 15.6 days at 27℃, and 12.3 days at 33℃, showing statistically significant difference among temperature regimes. The lower threshold temperature and thermal constant were 11.3℃ and 243.7 DD, respectively, for immature development. In relation to temperature, non-linear development models were established for each developmental stage of CLM.

The citrus leaf miner (CLM) is a of important citrus pests in Jeju island, but it’s not clear about ecology of over-wintering in Jeju. We investigated the developmental stage to know how the CLM overwinters in 20 sites. And we investigated the mortality of larvae, pupae and adult stage of CLM in open citrus cultivated field December, 2017 to April 2018 and growth chamber conditions(from –10 to 5 ℃). As a result, no larvae and adult survived open field during winter. We concluded that the CLM usually overwinters as pupa during winter.

원전사고 및 시설보수 과정에서 방출되는 방사성물질 중 137Cs은 토양의 주 오염원 중 하나이다. 세슘으로 인한 토양오염은 주민의 거주 및 공업용지로의 재사용을 위해 제염이 불가피하다. 본 연구에서는 다양한 토양복원 기술 중 국내·외에서 실 제 방사성물질로 오염된 토양에 적용한 사례가 있는 토양세척 기술을 선정하였다. 토양세척 공정은 세척제를 사용하여 토양 과 세슘의 표면장력을 약화시켜 토양과 세슘을 분리하는 원리이다. 이러한 토양세척 공정의 세척수 재사용을 통해 공정효율 을 높이고자 세척수에 응집제를 적용하여 미세토양 및 세슘의 제거 성능 실험을 수행하였다. ICP-OES를 통해 세슘 수용액 에 토양을 첨가하여 세슘을 흡착시킨 후 응집제를 첨가하여 세슘의 농도를 측정하였으며 응집제 적용시 최대 세슘 제거율은 약 88%, 최소는 67%였다. Visual MINTEQ Code를 통한 세슘과 토양과의 종결합을 예측하였으며 탁도 측정을 통해 응집제 투여 후 탁도를 측정하여 세척수의 재사용 여부 및 미세토양 제거율을 분석하였다.

수출 시 절화 장미의 재배 및 공선단계의 관행 기술을 개선하고자 수출 절화 장미 ‘Beast’와 ‘Cappucino’의 관행 관리 실태를 조사하였다. 일본으로 장미를 수출하는 파주시와 전주시의 재배농가 농가와 공선장 내 채화와 선별 시 사용하는 관리도구의 청결수준을 조사한 결과, 채화가위, 길이 선별 가위와 장갑과 선별대, 포장 시 사용하는 장갑과 선별대에서 300CFU･mL-1이상의 박테리아수가 검출되었다. 파주시 재배 농가 저온고 내 절화가 담긴 저장수는 2.8×105CFU･mL-1로 박테리아가 검출되었으며, Chrysal RVB clear intensive(Chrysal, Netherlands, 1%)를 사용하는 전주시 농가의 저장수에서는 4.7×105CFU･mL-1로 검출되었다. 파주시 공선장의 수출박스내 박테리아수는 후처리제(Al2O3, pH 4.5)를 사용함에도 불구하고 2.7ⅹ104CFU･mL-1이었다. 한편 파주시 재배농가에서 포장을 마친 국내 생산수출용 ‘Beast’와 ‘Beast’의 가공장미인 매직로즈의 절화보존제(Florallife-Clear200, Oasisfloral, Japan) 유무에 따른 절화수명 연장 효과를 알아보고자 실험한 결과, ‘Beast’의 경우 절화보존제 처리구의 절화수명은 TW에 비해 3일 절화수명을 연장시킬 수 있었다. 반면 매직로즈의 절화수명은 TW와 절화보존제처리 간 유의적 차이가 없었다. 이때 보존용액 내 박테리아수는 ‘Beast’의 경우 TW와 절화보존제 처리구에서 각각 8.1×104, 2.0×103CFU･mL-1이었으며, 매직로즈의 경우 9.9×104, 1.0×103CFU･mL-1이었다. ‘Cappuccino’를 이용하여 국내용 선별 단계(건식운송)와 수출단계(습식운송)를 마친 절화의 절화수명을 조사한 결과, 국내유통용의 절화수명은 8일인 반면 수출용은 12일로, 습식운송했던 수출용 절화가 건식운송한 국내유통용절화보다 4일 길었다. 이에 따른 절화수명종료 현상은 국내유통용처리에서는 꽃목굽음(bent neck)과 꽃잎 탈리 현상이 각각 50%로 나타났고, 수출용처리구에서는 꽃잎탈리는 72.7%, 꽃목굽음은 18.2%이 나타났으며, 국내유통용처리에서 나타나지 않았던 잿빛곰팡이병이 9.1%로 나타났다.

건강기능식품에서 이산화규소 분석 방법을 확립하기 위하여 산(불산과 붕산)분해를 이용한 ICP-OES 방법을 수행하였다. 이 방법의 검출한계와 정량한계는 각각 0.07 mg/ L, 0.20 mg/L 이었다. 검량선은 0.2~20.0 mg/L의 농도범위 에서 우수한 직선성(r2 0.99)을 보였다. 글루코사민 제품에 이산화규소 0.4, 1.0, 2.0% (w/w)를 첨가하여 시험한 결과 90.22~94.14%의 회수율과 0.72~1.67%의 정밀성을 나타내었다. 확립된 방법으로 시중에 유통되는 건강기능식품 11 품목의 이산화규소 함량을 분석한 결과 0.02~1.80% (w/w) 로 나타났다. 이 결과는 건강기능식품에 이산화규소의 사 용기준 2% (w/w) 이하를 만족하는 결과로 시험한 제품들 은 규격에 적합하였다. 따라서 본 연구에서 확립된 이 방법은 건강기능식품 중 이산화규소를 쉽고, 빠르게 분석할 수 있으며, 건강기능식품 중 이산화규소 함량 분석에 효율 적으로 사용될 수 있다

The vase life of gerbera is affected by the hardness of the scape. However, although hardening of the cell wall is thought to be caused by calcium ions binding with pectin, the effect of calcium on the pectin fractions in the scape of gerbera has not yet been described. Therefore, this study assessed the calcium and pectin contents of the gerbera scape during bending. The scape of the gerbera cultivar ‘Harmony’ mostly e xhibited b ending i n the S1 and S 2 sections, and the bent scape had poor hardness compared with a normal, unbent scape. The calcium contents of the S1 and S2 sections of the bent scape were 2.9 mg·L-1 and 2.6 mg·L-1 lower than that of the normal scape. Furthermore, the total pectin contents were also generally lower in t he b ent scape, p articularly in t he S 1 section.

As the hangover relieving drink market has been expanded, there have been efforts to produce traditional drinks that can be easily taken through reducing material costs after finding materials with high alcohol-degrading activity from agricultural products and manufacturing drinks in a way to produce sikhye. Studies were made to know quality, the ability to relieve hangover and preference of drinks for which seven kinds of agricultural products, including shiitake mushrooms, were added in the forms of fresh juice, extracts and powder. Farm products showed the highest acetaldehyde dehydrogenase (ALDH) when they were added in the form of powder before saccharification and shiitake mushrooms showed the highest enzyme activity when they were added in the form of powder. When added in the form of powder, people showed the lowest preference except when radish and hericium erinaceum were added. When bear puree was added to a mixture of powdered shiitake mushrooms, radish, bean sprouts and dadagi cucumber, enzyme activity got higher and people showed higher preference. An experiment of animal behaviors showed that the mixture had a high ability to relieve hangover in one or two hours after 10% or 40% alcohol was orally administered to mice due to long traveling distance of mice.

A sintered body of TiB2-reinforced iron matrix composite (Fe-TiB2) is fabricated by pressureless-sintering of a mixture of titanium hydride (TiH2) and iron boride (FeB) powders. The powder mixture is prepared in a planetary ball-mill at 700 rpm for 3 h and then pressurelessly sintered at 1300, 1350 and 1400oC for 0-2 h. The optimal sintering temperature for high densities (above 95% relative density) is between 1350 and 1400oC, where the holding time can be varied from 0.25 to 2 h. A maximum relative density of 96.0% is obtained from the (FeB+TiH2) powder compacts sintered at 1400oC for 2 h. Sintered compacts have two main phases of Fe and TiB2 along with traces of TiB, which seems to be formed through the reaction of TiB2 formed at lower temperatures during the heating stage with the excess Ti that is intentionally added to complete the reaction for TiB2 formation. Nearly fully densified sintered compacts show a homogeneous microstructure composed of fine TiB2 particulates with submicron sizes and an Fe-matrix. A maximum hardness of 71.2 HRC is obtained from the specimen sintered at 1400oC for 0.5 h, which is nearly equivalent to the HRC of conventional WC-Co hardmetals containing 20 wt% Co.

This study was conducted to investigate the effectof supplemental lighting intensity (SLI) on the shoot growthand flower quality of Rosa hybrida ‘Pink Bell’ in winter sea-son. High pressure sodium lamps (HPS) which were set upat 1.4m height above the planting beds were adjusted forthe SLI treatments: no supplemental lighting (control), pho-tosynthetically active radiation (PAR) 30, 50, 70, and 90µmol•m−2•s−1 in 20h daylength (17:00 to 22:00 and 02:00to 09:00). Shoot growth including shoot elongation, shootweight, and flowering speed was promoted quantitatively asSLI increased. But the flower quality such as petal num-bers, petal pigmentation, and biomass distribution to thepetals was declined at PAR 90, even though the proper SLIfor rose production was generally known in the range ofPAR 90 to 120. In this experiment PAR 90 treatment madethe surface of petals heated near 30oC which was about10oC higher than the control group without supplementallighting. The surface temperature of the petals was continu-ously rising because the distance to lamps from floral budsbecame increasingly short as the shoots grew in localgreenhouse facilities. The heat stress by HPS lampscaused petal discoloration and over-consumption of assimi-lation products due to excessive respiration and water lossin petals. Thus, it is necessary to prevent heat injury byswitching light intensity depending on shoot growth consid-ering local greenhouse structure.

The present study aimed to figure out current situation and consumer perception on the advertising of functional climbing wear in Korea. Advertising is about showing consumers how products meet their needs. In case of functional clothing, the most basic need of consumer should be a functional need (Lee, 2014;Shimp, 2010). However, research on advertisement of functional clothing, especially focused on the functional information, has not carried out in Korea. Recently research by Liu and Yoo (2014) investigated changing patterns of magazine advertising of functional climbing wear from 2008 to 2013. It is found that advertisements of professional climbing wear had been changed like fashion apparel ads in terms of functional information, celebrity model dependence, and appeal type (Liu&Yoo,2014). On 2013, over 70% of functional climbing wear ads did not provide any functional information and percentage of celebrity model dependence was dramatically increased from 1.48%to35.30%. In this study, 388 adults in their 20-50’s were surveyed in order to figure out general satisfaction on advertisements of functional climbing wear. The survey consisted of eight questions including satisfaction with reliability, communicability, type of expression, model, and contents of functional climbing wear advertisement. For analysis of characteristics of respondents, years of climbing experience, frequency of climbing, average expenses per single purchase, and frequently exposed advertising media types were asked as well as demographic characteristics. Most of respondents (83.85%) were in their 30-50’s and had 3-5 years climbing experience (29.50%).Frequency of climbing was ‘once every two months’ (35.70%) and ‘1~2 times every month’ (25.26%), and the most frequent average expenses per single purchase was ‘100~300 thousand won’ (65.25%). Frequently exposed advertising media types were TV commercials (33.60%), magazine (23.10%), and internet (9.50%). Purchase frequency was ‘once every two tears’ (31.14%), ‘3~4 times in a year’ (29.11%), ‘1~2 times in a year’ (25.06%). Results showed respondents want ‘more precise information for better understanding of performance of functional climbing wears’ (4.22point out of 5.00). Significant differences in ‘advertisement of functional climbing wear is reliable’ were observed across age and gender; male rather than female group and ages 30 are than other age groups showed higher average value. Age 40’s significantly more wanted to be informed precise information via advertisement and preferred celebrity model than other age groups. Overall, ages 20-30’s were more satisfied with the advertisement of functional climbing wear than age 50’s. The results from this study could provide practical insights to establish guidelines for providing product information in the functional clothing industry.

‘Well-being’ is an important trend and issue that requires consumers to be satisfied with various functional fabrics; subsequently, functional fabrics that are highly sensible, functional, and environmentally friendly have a competitive edge (O’Mahony & Braddock, 2002; Hui, Lau & Ng, 2004). Recent interest in environmental protection due to global warming has led to various energy reduction campaigns. Fabric research has focused on developing cool summer fabrics and warm winter fabrics. The selection of a correct textile material is important to form a pleasant clothing climate. New fabric development requires new measurement methods. Warm/cool touch is a major factor that influences thermal clothing comfort. Current measurements of warm/cool touch is mainly assessed by Q-max using Thermo-LaboⅡ. The potential of using an infrared thermography camera (widely used because of its relatively cheap price) on warm/cool touch research has increased because it can visually show changes in clothing surface temperature. Skin temperature is a factor that influences heat exchange between the body and environment. It also indicates the effectiveness of the heat transfer process. It is an important standard to evaluate thermal comfort in thermal physiology. The techniques to measure skin temperature have been investigated to find more accurate data (Min, Chung, Sung, Jeon, & Kim, 2001). A thermometer is generally used to measure body temperature; however, there are some difficulties to accurately measure skin temperature using a thermometer. First, skin temperature was determined by only a few points on the body. Second, heat occurs during exercising due to fabric and thermometer friction that creates difficulties for the accurate measurement of skin temperature. A previous study by Choi & Lee (2008) indicated that it would be possible to evaluate the thermal properties of clothing using infrared thermal images. This study used a garment with different triacetate and PET high absorbance quick dry filament blending ratios and chose three healthy female subjects in their twenties to evaluate wear comfort sensations. They walked at 3.3 km/h for 20 minutes under conditions of 29±2℃ and 75±5% R.H. Subjective assessments of wear coolness, microclimate, and the thermogram image under the clothing were measured before and after exercising. We compared the results of the microclimate and subjective assessments with the results of the thermogram analyses. Clothing, high blended with triacetate, had a small average temperature difference as indicated by infrared thermal image. This result corresponded to subjective thermal sensation, microclimate humidity, and subjective wear comfort.

Clothing comfort indicates the comfortableness of the in varying environmental situations while wearing specific clothing. Various factors affect clothing comfort such as skin moisture perception and heat transmission characteristics via clothing; however, cool and warm touch are the most important factors (Kwon, Yi, & Sung,1999; Hong & Kim, 2007; Manshahia & Das, 2014). The thermal comfort of clothing is perceived through sensory receptors on the skin surface and is highly related to a cool and warm touch. An infrared thermography camera detects infrared-ray-form energy, a type of electromagnetic wave radiated from the subject's surface that assesses the intensity of radiant heat. The changing intensity then presents a real-time infrared thermal distribution using various colors. The advantages of an infrared thermography camera are the ability to use a non-contacting method to measure temperature distribution and analyze temperatures. Therefore, an infrared thermography camera is widely used in material characteristic assessment, boiler heat distribution analysis, process control, and building insulation assessments that indicate system deficiencies. This technique has also recently been used in human-body-related temperature measurements with potential for application to medical fields that include breast cancer examinations, joint muscle disorders, and body reactions under specific conditions. The most significant advantage of infrared thermography cameras to evaluate heat conductivity according to wearing conditions are its inexpensive price, ease-of-use and visual representation of surface heat dispersion on clothing that maintains body temperature and helps dissipate sweat(B. Lee, Hong, & Y. Lee, 2010; Lee, K. Hong, & S. A. Hong, 2007). This technique is also used in a quantitative analysis of thermal sensation when wearing clothes (Choi & Lee, 2008). This study helps develop a method to evaluate the warm feeling of fabrics using an infrared thermal image of a small test specimen. An infrared thermal image helped develop5 types of fabrics for heat storage fabric; consequently, the average temperature difference of the human palm when the fabric is on or off was used for the scale of the fabrics’ warm feeling. The relationshipbetween this average temperature difference on the palm surface Qmax, and warmth keep-ability rate was examined. Fabric had a significant average temperature difference in the infrared thermal image with alow Qmax value and was evaluated with high values in the warmth keep-ability rate. Infrared thermography camera was shown to be effective in the fabric's warm feeling evaluation.

Based on the research finding, the conclusions are as follows: 1. According to the result of questionnaire survey, at present the apron material that chef wear does not have fire retardant function, chef expect apron material can add this function, they think apron material adding this function can protect physiological health, proving the necessity for developing fire retardant apron. 2. This study use the result of chef’s need expectation, and combine ergonomics data to adjust existing apron structure design, then this study use fire retardant cloth to develop fire retardant apron to meet chef’s need expectation. 3. Through the sensibility evaluation test of fire retardant apron developed by this study, those who exposed to higher temperature fry stove fire, charcoal fire or caldron cook in specific kitchen infield for a long period of time have higher preference and feeling.

Padded outers (jackets, jumpers or coats) are a popular and “must have” item for cold weather because they provide light weight warmth and good style. This study investigates Korean female’ attitudes and factors on purchase decisions for luxury padding outers by level of involvement. A total of 287 female respondents participated in the survey with data obtained using a random sampling method from on and off line respondents aged20’sto40’sinthe Seoul and Gyeonggi area. The study was based on the Maslow’s Hierarchy of needs and Zaichkowsky’s concept. Respondents were asked to indicate their degree of agreement on a 5 point Likert scaled that measured involvement, attitudes, and decision purchased factors. Factor analysis, cluster analysis, correlation and T test were conducted. A factor analysis on 9 needs/motivation measures about padded outer products indicated two factors of a motivation factor and physiological factor for “expectations to have a more positive outcome”. Involvement related to 10 measures about padded outer products indicated two factors of “personality/desires” and “interest/value”. In addition, two other factors were extracted in attitude measure variables of “positive attitudes” and “negative attitudes” towards premium outers. We realized that “expectations to have a more positive outcome” motivation influenced positive attitudes more than “physiological” motivation about premium padded outers. “Personality” involvement factor correlated highly with “positive” attitude factor towards exclusive padded outers (Pearson r=0.766), while the “interest” involvement factor correlated slightly. We can interpret individuals are very positive towards premium products if someone has expectancy to achieve desirable outcomes and wants to express personality. Clustering from involvement measures based on needs, values and interests were classified into two groups. There was a significant difference in the respondents’ purchase decision factors between two segments based on the levels of involvement (p<0.001). The high product involvement group was brand and country of origin conscious, material conscious, trend sensitive, luxury image seeking, and less padding outer price conscious. The low product involvement group was more color conscious in purchases. The findings imply that different marketing approaches are recommended to target each segment in the outer clothing markets.

This study enhances the capability to reproduce multi-coloured images in woven Jacquard forms where weave structure and pattern design were considerably involved in fabrication. In modern weaving, great convenience and efficiencies were established in both production and design process through digitalisation, while the colour adoption has been constrained as the applicable number of figuring yarns were limited. The enhancement toward colour realisation is traditionally related to weaving capability. Surface colour display is dominated by additive, subtractive or optical mixing (Mathur, 2007). An additive colour system offers the largest gamut among output models yet, the light mixing principle is not suitable to apply to weave colour creation. Pre-dyed opaque yarns are used and juxtaposed; small particles of yarn colours reflect lights and they were observed as a certain form of colour. The common and crucial criterial pertinent to an optical mixing of weave colours were aligned more with the subtractive mixing principle. A weave pattern was designed by subtractive primary colour classification and a multi-weft figuring method. Secondary colours are theoretically produced when coupled CMY layers are mixed(i.e., cyan + magenta = blue, cyan + yellow = green, magenta + yellow = red) and black is generated when all CMY primaries are mixed (Berns, 2000);however, non-bendable colours of threads are employed for colour reproduction in weaving and there is a limit to adopt a pigment mixing principle in the woven form. Therefore, each weave pattern required a modification to redefine primary colour regions and densities once an original artwork was separated and presented in greyscales levels. The weave patterns in an original subtractive scheme were altered by applying region-based segmentation to maximise the accessible colour gamut. In this study, the weaving application developed for the multi-coloured image was introduced and the design process was explained based on a practical experiment proceeded with a newly developed weaving application.