In 2020, severe defoliation was reported in Abies holophylla plantations located in Hwacheon-gun, Gangwon-do. This damage was attributed to an outbreak of an unidentified sawfly species from the genus Cephalcia (Hymenoptera: Pamphiliidae). The larvae of this sawfly caused significant defoliation of the leaves. This pest has been identified as Cephalcia koreana Park & Jung, sp. nov., described as a new species in 2023. To investigate the occurrence pattern and density of C. koreana, we set up emergence traps and analyzed samples from affected branches. Our results showed that the density peaks for adults, eggs, and larvae were in mid-May, late May, and early June of 2021, respectively. However, their density decreased sharply after a notably cold spring period in 2022. Here, I aim to discuss the outbreaks of insect pests and their population dynamics.

Honey bees are crucial pollinators for agricultural and natural ecosystems, but are experiencing heavy mortality in Korea due to a complex suite of factors. Extreme winter losses of honey bee colonies are a major threat to beekeeping but the combinations of factors underlying colony loss remain debatable. Finding solutions involves knowing the factors associated with high loss rates. To investigate whether loss rates are related to Varroa control and climate condition, we surveyed beekeepers in korea after wintering (2021–2022 to 2022–2023). The results show an average colony loss rate of 46%(2022) and 17%(2023), but over 40% colony loss before wintering at 2022. Beekeepers attempt to manage their honey bee colonies in ways that optimize colony health. Disentangling the impact of management from other variables affecting colony health is complicated by the diversity of practices used and difficulties handling typically complex and incomplete observational datasets. We propose a method to 1) Varroa mite population Control by several methods , and 2) Many nursing bee put in hive before wintering.

During the operation of a nuclear power plant (NPP), the generation of radioactive waste, including dry active waste (DAW), concentrates, spent resin, and filters, mandates the implementation of appropriate disposal methods to adhere to Korea’s waste acceptance criteria (WAC). In this context, this study investigates the potential use of polymer concrete (PC) as a high-integrity container (HIC) material for solidifying and packaging these waste materials. PC is a versatile composite material comprising binding polymers, aggregates, and additives, known for its exceptional strength and chemical stability. A comprehensive analysis of PC’s long-term integrity was conducted in this study. First, its compressive strength, which is crucial for ensuring the structural stability of HICs over extended periods, was evaluated. Subsequently, the resilience of PC was tested under various stress conditions, including biological, radiological, thermal, and chemical stressors. The findings of this study indicate that PC exhibits remarkable long-term properties, demonstrating exceptional stability even when subjected to diverse stressors. The results therefore underscore the potential viability of PC as a reliable material for constructing high-integrity containers, thus contributing to the safe and sustainable management of radioactive waste in NPPs.

This study investigated unrecorded freshwater bacterial species in Korea. Water and sediment samples were collected from the Nakdong River basin from 2020-2022. Bacterial isolates obtained through the conventional culture method with commercial media were subjected to 16S rRNA gene sequencing to identify unrecorded bacterial species. Results of 16S rRNA gene sequencing of the bacterial isolates revealed that a total of 44 bacterial isolates shared 16S rRNA gene sequence similarities of more than 98.65%, with validly published bacterial species not reported in Korea yet. These isolates were phylogenetically assigned to 4 phyla, 7 classes, 21 orders, 33 families, and 42 genera. A total of 2, 6, 12, and 24 species belonged to phyla Bacillota, Bacteroidota, Actinomycetota, and Pseudomonadota, respectively. Here, we provide details of these 44 unrecorded bacterial species, including Gram staining, colony and cellular morphologies, biochemical properties, and phylogenetic position.

Buckwheat (Fagopyrum esculentum), which is a traditional Korean crop, has been known as a health food due to its rich nutrition. This study was conducted to evaluate the change in flavonoid content of flowers and seeds during post-flowering growth of Korean tartary buckwheat variety ‘Hwanggeummiso’, with the aim of providing basic data for the development of functional food and feed additive. Tartary buckwheat took 69 and 99 days from the sowing date to reach the flowering and maturity stages, respectively. As a result of examining the flavonoid components of each part of tartary buckwheat, chlorogenic acid, rutin, and isoquercitrin of flowers increased from the flowering period on 22 May (0 days after flowering) to 42 days after flowering, while quercetin increased until 21 days after flowering and then decreased thereafter. In seeds, chlorogenic acid, rutin, and isoquercitrin were most abundant at the time of seed-bearing on 14 days after flowering, and showed a decreasing tendency thereafter. On the other hand, quercetin showed a tendency to increase until 21 days after flowering and then decrease. Overall, the flavonoid content was higher in flowers than in seeds, with rutin being particularly prominent. Based on this, the possibility as food materials and feed additives was confirmed using buckwheat produced in Korea.

This study investigated ethopabate (EPB) residues in edible tissues of broiler chickens given in drinking water and established the withdrawal time (WT) of EPB in poultry tissues. Twenty-four healthy Ross broiler chickens were orally administered with EPB at the concentration of 3.8 mg/L for 14 days (EPB-1, n=24) and 15.2 mg/L for 7 days (EPB-2, n=24) through drinking water, respectively. After the drug treatment, tissue samples were collected from six broiler chickens at 0, 1, 3, and 5 days, respectively. EPB residue concentrations in poultry tissues were determined using LC-MS/MS. Correlation coefficient values ranged from 0.9980 to 0.9998, and the limits of detection and quantification (LOQ) were 0.03~0.09 and 0.1~0.3 μg/kg, respectively. Mean recoveries in muscle, liver, kidney and skin/fat tissues were 95.9~109.8, 108.7~115.3, 89.9~96.6 and 86.7~96.8%, respectively, and coefficient of variations were less than 17.11%. At the end of the drug-administration period (0 day), EPB was detected at levels under the LOQ in all tissues from both the EPB-1 and EPB-2 groups. According to the results of EPB residue in Ross broiler tissues, withdrawal periods of both EPB-1 and EPB-2 in poultry tissues were established to 0 day. In conclusion, the developed analytical method is suitable for the detection of EPB in poultry tissues, and the estimated WT of EPB in poultry tissues will contribute to ensuring the safety of Ross broiler chickens.

Cordycepin (3'-deoxyadenosine) is a nucleoside analog known for its diverse range of biological activities. This study investigated the effect of different types of sawdust on the production of the bioactive compound cordycepin. The results of the study showed that different types of wood sawdust affected the biosynthesis of cordycepin and a significant increase was observed when the conventional SDB medium was replaced with 1% NaOH treated pine sawdust. To optimize cordycepin production from Paecilomyces tenuipes in a medium containing 1% NaOH-pretreated pine sawdust, we employed Response Surface Methodology (RSM) in its Box-Behnken design (BBD) canonical form. The optimal conditions were determined as follows: a particle size of 109.5111-mesh (140 m) for 1% NaOH-pretreated pine sawdust, an input weight of 21.1679 g/L, and an incubation time of 73.8423 hours. According to our model, this combination is expected to yield a maximum cordycepin content of 896.1428 g/mL. Experimental validation of this prediction was performed using the suggested optimal conditions, resulting in an average cordycepin content of 922.6771 g/mL across three replicates, thus confirming the model's accuracy.

With the infusion of advanced technology, interactions between customers and firms’ representatives take place in brick-and-mortar stores, 2D online sites, and even 3D metaverse environments. In the metaverse, a firm’s sales avatars interact with other users while representing the firm, recommend, and sell virtual items. Previous literature about the effectiveness of sales representatives agrees that a firm representatives’ smiling faces engender customer satisfaction and better interactions. However, it is unclear whether smiling faces of sales avatars will work the same way in the metaverse as they do in the real world. The current research examines whether a firm’s sales avatars with sad facial expression (vs. those with smiling facial expression) stimulate higher user intentions to interact with firm representative avatars, to purchase virtual items from the representative avatars, and to spread positive WOM about their experience in the metaverse. Moreover, focusing on subcultural appeal, we investigate why this unconventional phenomenon happens in the metaverse unlike in real world. We conducted two experiments to manipulate a firm representative avatar’s facial expression (smiling vs. sad) in the metaverse. We newly designed a metaverse place, and participants who put on a virtual reality headset are exposed to either a hat (Experiment 1) or shoes (Experiment 2) store where they can purchase a virtual hat or shoes. Experiments 1 and 2 basically tested the same things repeatedly. However, to improve internal validity and generalizability, Experiment 2 used human-like sales avatars instead of cartoon character-like sales avatars in Experiment 1, changed virtual stores from a hat store to shoes store, and finally controlled for various extraneous variables such as attractiveness, warmth, and competence of sales avatars, and user’s previous experience about metaverse. Sales representatives with a smile are believed to contribute to beneficial consumers’ attitudes and behaviors in offline stores. However, our experiments demonstrate that this well-received belief does not necessarily apply in the metaverse, where subcultural appeal plays a more critical role. In the metaverse, users evaluate sales avatars with sad facial expression (vs. with smiling facial expression) as more unique and cool (i.e., higher subcultural appeal), leading to their higher intention to interact with the sad sales avatar, to purchase a virtual item, and to spread positive WOM about their experiences. Our results imply that previous findings supported in the offline or 2D online sites may not work the same way in the 3D metaverse.

From 2020, Korean Animal and Plant Quarantine Agency has reset the withdrawal time (WT) for veterinary drugs typically used in livestock in preparation for the introduction of positive list system (PLS) program in 2024. This study was conducted to reset the MRL for amprolium (APL) in broiler chickens as a part of PLS program introduction. Forty-eight healthy Ross broiler chickens were orally administered with APL at the concentration of 60 mg/L (APL-1, n=24) for 14 days and 240 mg/L (APL-2, n=24) for 7 days through drinking water, respectively. After the drug treatment, tissue samples were collected from six broiler chickens at 0, 1, 3 and 5 days, respectively. Residual APL concentrations in poultry tissues were determined using LC-MS/MS. Correlation coefficient (0.99 >), the limits quantification (LOQ, 0.3~5.0 μg/kg), recoveries (81.5~112.4%), and coefficient of variations (<15.5%) were satisfied the validation criteria of Korean Ministry of Food and Drug Safety. In APL-1, APL in all tissues except for kidney was detected less than LOQ at 3 days after drug treatment. In APL-2, APL in liver and kidney was detected more than LOQ at 5 days after treatment. According to the European Medicines Agency’s guideline on determination of withdrawal periods, withdrawal periods of APL-1 and APL-2 in poultry tissues were established to 3 and 2 days, respectively. In conclusion, the developed analytical method is sensitive and reliable for detecting APL in poultry tissues. The estimated WT of APL in poultry tissues is longer than the current WT recommendation of 2 days for APL in broiler chickens.

Cordyceps militaris (C. militaris) is a unique and valuable medicinal fungus belonging to the Cordyceps species. C. militaris is the only fungus that contains cordycepin which is a biologically active compound. In previous studies, light-emitting diodes (LEDs) are known to be effective in increasing cordycepin content, but metabolic profiling of LED-stimulated C. militaris has not been confirmed. Metabolic profiling is essential to understanding the metabolic regulation of cordycepin. This study studied the physiologically active secondary metabolites of C. militaris according to the presence or absence of stimulation of LEDs through GC-MS analysis. Most of the metabolites were detected in both samples, but there was a clear difference in the detected concentration. In particular, C. militaris had a significant difference in amino acid levels when stimulated with LEDs. Our results suggested that LEDs could stimulate amino acid synthesis in C. militaris mycelium to increase the cordycepin content.

Roridin E, a constituent of Podostroma cornu-damae, has excellent medicinal properties and exhibits powerful anticancer effects. However, being a poisonous mushroom, P. cornu-damae is difficult to find in its natural environment. Therefore, only a limited amount of roridin E is isolated from P. cornu-damae. We isolated roridin E from mycelial culture medium of P. cornu-damae and examined its effects on five breast cancer cell lines. The purity of the isolated roridin E was 96%. It exhibited anticancer effects on all five breast cancer cell lines, with an IC50 of at least 0.0006 mg/L. To the best of our knowledge, this is the first report on the investigation of effects of roridin E isolated from the mycelium of P. cornu-damae mushrooms on five breast cancer cell lines. However, safety issues should be investigated and addressed in future studies before roridin E is used in clinical settings.

The 2007 Recommendation of the International Commission on Radiological Protection recommended the application of dose constraints to optimize radiation protection to resolve the inequity of exposure among radiation workers. The average annual occupational doses in Korean nuclear power plants (NPPs) are 0.3-0.8 mSv. These doses are much lower than the annual effective dose limit of 50 mSv for radiation workers stipulated by the Nuclear Safety Act. In addition, most NPP workers received less than 0.1 mSv per year. These doses are lower than the average annual occupational doses of 0.3- 0.8 mSv. Korean regulatory body conducted the study to legislate the dose constraints in the Korean regulatory system and determine dose constraints (draft) for radiation workers. The legislation of dose constraints would not greatly affect the radiation protection programs in Korean NPPs because most workers received very low doses. However, some workers received relatively higher doses than others. This study analyzed the occupational exposure conditions, such as exposure type and situation, in Korean NPPs. This study investigated the internal and external radiation doses and the radiation doses depending on the NPP operating conditions, including normal operation, planned maintenance, and intermediate maintenance, for the last ten years (2012-2021). As a result, most NPP workers received external exposure rather than internal exposure. Furthermore, most radiation exposures occurred during the planned maintenance period. The results of this study can be used for optimizing occupational doses in Korean NPPs.

According to attached Table 1 of the Enforcement Ordinance of the Nuclear Safety Act, the effective dose limit of transport workers shall not exceed 6 mSv per year. In addition, the enforcement ordinance defines a transport worker as a person who transports radioactive substances outside the radiation management area and does not correspond to a radiation worker. In the nuclear power plants (NPPs), substances in radiation management areas are frequently transported inside or outside the plant. During loading of substances in the radiation management area onto the vehicle, the transport workers (including driver) are located outside the radiation management area. And also the exposure dose of transport workers is managed by using Automatic Dose Reader (ADR). However, the exposure dose of transport workers managed by NPP licensee is limited to the exposure caused by the transport actions required by the plant. This means that radiation exposure caused by the transport of radioactive materials carried out separately by individual transport workers other than the plant requirements cannot be managed. Therefore, even if the NPP licensee manages the transport worker’s dose below 6 mSv, it is difficult to guarantee that the total annual exposure dose, including the transport worker’s individual transport behavior, is less than 6 mSv. Therefore, it would be appropriate to manage the dose of the transport worker by the transport worker’s agency rather than by the NPP licensee.

Tritium is a radioactive isotope of hydrogen with a half-life of about 12.3 years, and it is commonly found in the environment as a result of the production of Nuclear Power Plants. The World Health Organization (WHO) has established guidelines for the permissible levels of tritium in drinking water. The guideline value for tritium in drinking water is 10,000 Bq/L. It is important to note that the guideline value for tritium is not a legal limit, but rather a recommendation. National and local authorities may establish legal limits that are more restrictive than the WHO guideline value based on local conditions and risk assessments. The Australia and Finland have set a limit for tritium in drinking water at 76,103 Bq/L and 30,000 Bq/L respectively, which is more than three to seven times higher compare to guideline value of WHO. The United States Environmental Protection Agency (EPA) has set a maximum contaminant level (MCL) for tritium in drinking water at 20,000 picocuries per liter (pCi/L), which is equivalent to 740 Bq/L. The Health Canada has set a guideline value for tritium in drinking water at 7,000 Bq/L. Assuming drinking water corresponding to each tritium limit (or guideline value) for one year, the expected exposure dose is 0.01 mSv to 1 mSv. It means that the tritium in drinking water below the limits or guideline value does not pose a significant risk to human health.

The site used for a nuclear facility can be released after decommissioning if the results of dose estimation meet the regulatory requirements and the site release is approved by the regulatory body. RESRAD-ONSITE, developed by the Argonne National Laboratory, is a computer code used to estimate the dose to the residents on radiologically contaminated sites. The dose estimation for site release should consider various exposure pathways, including inhalation, ingestion, and external exposure. This study used RESRAD-ONSITE to evaluate the internal exposure dose and identify radionuclides due to the intake of food produced on radiologically contaminated sites. The upper limit of the clearance level of radionuclides expected to remain at the site was used as the source terms for the dose evaluation. In addition, the amount of food intake per capita was obtained from eight countries using nuclear power generation as of 2020. The default values of RESRAD were used for other parameters except for intake by type of food and source terms. As a result of the dose evaluation, the contaminated water and vegetables showed a great contribution to the exposure dose. The dose due to tritium in drinking water was highest in the third year. In addition, regarding the intake of vegetables, the internal exposure due to 90Sr was the highest in the first year.

As of 2023, there are a total of 24 nuclear power plants (NPPs) in operation in Korea, with 21 pressurized water reactors (PWRs) and three pressurized heavy water reactors (PHWRs). Korean NPPs discharge radioactive effluents into the environment every year. Radioactive effluents from NPPs contain various radionuclides and materials, including 3H, 14C, Noble gas, particulates, and iodine Among the radioactive effluents discharged from Korean NPPs, 14C is a pure beta emitter with a half-life of 5,730 years. The human body can inhale and ingest 14C to cause internal exposure. In addition, the amount of 14C present in the environment is decreasing, but the amount of 14C discharged from NPPs is increasing. 14C discharged to the environment can be inhaled and ingested by the public around NPPs through various pathways. For this reason, it is very important to monitor and manage 14C because it affects the dose of the public around NPPs. Therefore, this study compared and analyzed the average emissions of 14C discharged from PWRs and PHWRs during the recent 10 years (2012-2021). An average of the public dose due to 14C released from NPPs depending on the reactor types from 2012 to 2021 was also compared. It is inevitable to discharge radioactive effluents while operating NPPs. Korea Hydro & Nuclear Power (KHNP) manages and monitors radioactive effluents released into the environment. According to a survey and analysis of 14C discharged from PWRs and PHWRs and the average dose of the public over the recent 10-year (2012-2021) around Korean NPPs, 14C released from PWR accounted for 3.1% of the total discharge but accounted for more than 93.67% of the total public dose. In addition, 14C discharged from PHWRs accounted for 1.12% of the total discharge, but its resulting dose to the public accounted for more than 83.87% of the total public dose. As a result of analyzing the public dose due to 14C from 2012 to 2021, it was gradually increasing every year. Based on these results, monitoring and managing 14C discharge and its resulting doses to the public are important in the future.

After the Fukushima nuclear accident in Japan in March 2011, many Koreans were concerned that products exposed to radioactive materials released from the nuclear power plant would be imported into Korea. Systematic radiation monitoring was required for food and daily necessities imported from the nuclear accident area. The need for a legal system to support systematic radiation monitoring was also demanded. The Act on Protective Action Guidelines against Radiation in the Natural Environment was enacted to resolve concerns regarding environmental radiation in Korea in July 2011. According to this law, radiation monitoring equipment has been installed and operated at major airports and ports nationwide. This paper aims to review the radiation monitoring system of the Korean government comprehensively. The legal system and the legal basis for radiation monitoring of imported cargo conducted by each department were investigated by analyzing the laws and regulations of radiation monitoring for the relevant cargo items. In addition, the current status of radiation monitoring by the government departments was examined to determine how radiation monitoring for imported cargo is performed within the legal system. The investigation of the current radiation monitoring system for imported cargo in Korea confirmed that radiation monitoring is conducted by classifying cargo items under the jurisdiction of each government department for all imported cargo. However, the reduction in efficiency of radiation monitoring of imported cargoes, unclear legal grounds for radiation monitoring of imported cargo by some departments, the occurrence of overlapping inspections by departments, and the difficult process of issuing the radiation test certificate required for customs clearance by the Korea Customs Service were also identified. As a result of the analysis, it was found that the current radiation monitoring system for imported cargo in Korea ought to be improved, taking into account efficiency, overlapping inspection, legal background, and the difficult process of issuing the certificates.

The large rectangular and cylindrical concrete drums are stored in nuclear power plant (NPP) for a long time. At the early stage of NPP operation, the treatment technology of boron concentrates and spent resin was not well developed, when compared to current system. Since the waste acceptance criteria (WAC) of the disposal facility was not established, the boron concentrates and spent resins were packaged in 200 L drum. Some of the 200 L drums, which contain relatively high dose rate radioactive waste, were stored in large concrete drum. The concrete drum offers superior shielding effect and allows reduction of radiation exposure to workers. The WAC requires various characteristics: radiological characteristics, physical characteristics, chemical characteristics, etc. The non-destructive method allows the rapid evaluation and estimation of the concrete structure. Also, it is expected that the large concrete exhibits integrity after the measurements. In this paper, the non-destructive method to understand the large rectangular and cylindrical drum is systematically studied. The advantage and disadvantage of the non-destructive methods were compared in this paper. In addition, the optimized methodology to characterize the radioactive waste containing large rectangular and cylindrical drum will be discussed in this paper.