This study conducted the minimum weight optimum design using the differential evolution and genetic algorithm of simple structure. And then, the optimization program was verified with the numerical analysis examples of fixed beams. As a result, the graphs of these two optimization programs increased similarly.

This study suggests and examines the ways of asset valuation on maintenance scenario for bridge facilities. In order to evaluate each scenario on the basis of the same time, the concepts of the condition assessment data are introduced and applied. The main purpose of this study is to suggest asset valuation method, which is practical in conformity with domestic situations, through researches on asset valuation method of bridge facilities. As a consequence, the management and maintenance system of existing highway facilities needed an innovation involving the concept of asset management. This study discusses the new facility management system suitable to local highway agencies. The developed system improves the current methods of establishing the bridge maintenance strategy and can be utilized as an efficient tool to provide the optimum bridge maintenance scenario and corresponding to the various constraints and requirements of bridge agency.

‘화원 3호’는 종간교잡을 통해 화영벼의 근동질계통을 육성하고자 ‘97년 화영벼와 O. rufipogon을 교배하고, 계속적인 여교배와 MAS를 병행 실시하여 CR1112-5-2-1 계통을 선발하였다. 생산력검정 시험 결과 조사 형질 중 이삭추출도, 적고를 제외한 기타 형질에서는 화영벼와 유사한 근동질계통이었으며, 품종보호원 출원 조건에 부합하여 ‘화원 3호’로 명명하고 품종보호원을 출원하였다. 출수기는 보통기재배에서 8월 14일로 화영벼와 동일한 중생종 품종이다. 천립중은 22.1 gr으로 화영벼보다 1 gr 정도 무겁다. 흰잎마름병과 줄무늬잎 마름병에는 저항성이나 충해에는 약하다. 도정 특성, 아밀로스 함량은 화영벼와 비슷한 수준이었다. ‘화원 3호의 정조수량은 ’06～’07년 2개년간 실시한 생산력검정 시험에서 평균 7.23 MT/ha로 화영벼와 유사하였다. ‘화원 3호’는 화영벼와 근동질계통으로 자포니카 계통의 내냉성을 증진시키는 중간 모본 그리고 내냉성 유전자의 특성 분석을 위한 육종재료로 이용될 수 있을 것이다.

파형강판은 제형, 정현형 등의 형상으로 얇은 강판을 주름지게 가공한 것으로 두꺼운 평판을 대신하여 사용하여도 높은 면외방향의 강성을 확보할 수 있다. 또한, 아코디언효과로 축방향 강성이 거의 없어 플레이트거더의 웨브에 적용할 경우 웨브가 전단력만을 부담하는 방법으로 쉽게 설계할 수 있다. 그러나 파형강판의 전단좌굴은 평판과는 달리 국부좌굴과 전체좌굴 외에도 이들의 연성에 의해서도 좌굴이 발생하는 매우 복잡한 특성이 있으며, 이러한 연성좌굴에 대한 원인과 특성의 규명은 정현형의 경우 제형보다 연구결과가 부족한 실정이다. 따라서 본 연구에서는 정현형 파형강판의 전단좌굴 특성과 연성좌굴이 발생하는 경향에 대해서 연구하였다. 전단좌굴강도를 계산하기 위해서는 유한요소프로그램을 이용하였고 해석결과를 정해와 비교하였다. 또한, 주름의 두께와 형상 파라메타에 따른 좌굴응력 변화의 특성과 좌굴모드형상의 변화를 분석하였으며, 이들의 결과를 이론식의 결과와 비교하여 좌굴양상의 변화시점에 대해서 분석하였다.

Corrugated plate is occurrence that the local buckling, global buckling and interactive buckling because of the geometric properties. However, It was difficult to predict the shear buckling behavior. This study analyzed the elastic shear buckling about geometric parameters of sinusoidal and trapezoidal corrugated plate.

A. oryzae로 발효한 청미래덩굴(Smilax china L.)잎 발효차의 적정 발효기간을 확립하고자 비 발효(NF) 및 10, 20 및 30일간 발효(F10, F20, F30)시킨 차 1% 열수추출물(1 tea bag 기준)의 색상, 관능검사 및 total polyphenol(TP), total flavonoid(TF), 전자공여능(EDA), 철환원력(FRAP), 과산화물 생성 억제능(LPOIA)을 조사하였다. 또, 체내 활성 산소(ROS) 생성계 효소인 동시에 요통과 음주로 인한 간 손상유도 및 이로 인한 복부비만에 직간접적으로 관여하는 xanthine oxidase(XO) 및 aldehyde oxidae(AO)의 저해활성에 미치는 영향을 조사하였다. 색상과 spectrum(400～700nm)의 변화를 조사한 결과, NF는 연한 황색을 띠는 반면 F10∼F30에서는 엷은 적색을 띠었으며 F10의 색상이 가장 선명하였다. 향(aroma)과 밝기(brightness)에 대한 기호도는 비발효차와 발효차간의 유의차를 보이지 않았으나 맛 (taste)과 입에 닿는 감각(mouth feel) 및 종합적인 기호도 (overall acceptability)는 F10, F20 및 F30 간의 뚜렷한 차이를 보이지 않아 발효 10일이 이상적인 발효기간이라 사료된다. TP 함량은 NF에서 41.55 mg/g(dry basis)이었으나 발효에 따라 거의 비례적으로 감소하였으며 그 감소율은 발효 10일째 24.91%, 20일째 56.92%, 30일째 64.41%를 나타내었다. TF의 함량은 NF에서 27.33 mg을 나타내었으나 발효에 점차적으로 감소하여 F10 24.30 mg/g, F20 17.32 mg/g, F30 13.22 mg/g으로 감소하였다. 그러나 TP의 감소율이 TF의 경우에 비하여 커서 TF/TP 비율(%)은 발효에 따라 증가하는 경향을 나타내었다. EDA는 NF에서는 29.01%이었으나 F10에서는 NF에 비하여 17.14%가 감소하였으며, F20 및 F30에서는 각각 18.79% 및 23.20%가 감소하였다. FRAP(μ M Fe2+)는 NF 4.63, F10 4.30, F20 및 F30에서는 각각 3.77 및 3.47로 발효에 따라 감소하는 경향을 보였다. LPOIA는 NF에서는 39.86%이었으나 F10의 경우는 31.92%로 NF에 비하여 19.92%가 감소하였고 F20 및 F30는 NF에 비하여 각각 23.61% 및 28.38%가 감소하였다. NF 및 F10∼30의 1% 열수추출액이 생유 및 토끼 간 조직으로부터 부분정제한 XO와 AO의 활성에 미치는 영향을 조사한 결과, XO활성에는 비발효, 발효 모두에서 뚜렷한 영향을 미치지 않았다. 그러나 AO의 활성은 비발효, 발효 관계없이 38.09∼41.70% 범위로 억제하였으며, 이러한 억제는 경쟁적 저해현상에 기인되어 나타난 것으로 생각된다.

In this study, we investigated the contents of total polyphenol (TP), total flavonoid, and absorbance at 475 nm (OD475) which may produced in solid-fermented leaf of Smilax china L. by Aspergillus oryzae as a new functional components with reddish brown color, contents of water soluble substance (WSS), electron donating ability (EDA), Hunter L*, a*, b* values, sensory overall acceptability (OA) and also, the inhibitory activities (XOI and AOI) against partial purified xanthine oxidase (XO) and aldehyde oxidase (AO) from rabbit liver which were well known to relate the gout, and alcoholic liver disease, respectively in order to optimize water extraction using response surface methodology (RSM). All the R2 values of the second-order polymonials ranged from 0.85 to 0.98, except for the EDA (0.69) and the XOI (0.78). However, the activities of the EDA and XOI were relatively high in the lower concentration of the fermented Smilax china L. leaf. The effects on the water extraction were highest in the concentration, among the dependent variables, and showed significant differences at the 1% level in the TP, TF and WSS contents and the a*, b* and OD475 values, but the OA showed significant differences at the 5% level. The optimal values of AOI, which was the most important functionality in the Smilax china L. that was predicted via RSM, were 59.48% at the 2.19% concentration, a 90.02°C extraction temperature and a 4.03 minute extraction time (R2: 0.93, p<0.007). The ranges of all the dependent variables of the optimal water extraction were 1.6~1.8% for the concentration, 83~93°C for the temperature and 3.4~4.4 minutes for the extraction time; and the optimal water extraction conditions were a 1.7% concentration, an 88°C extraction temperature and a 3.9-min extraction time.

Corrugated plate is made that the local buckling, global buckling and interactive buckling occurs because of the geometric properties such as the accordion effect.Corrugated steel having such characteristics is shows a buckling characteristic different from the plate. However, It was a design by the basis of the shear buckling equation of plate. Therefore, this study was investigate the characteristics of the shear buckling mode and shear buckling stress of sinusoidal corrugated plate through a parametric study using the finite element method.

This study was evaluate the shear buckling characteristic of sinusoidal corrugated plate. We analyzed the effect on shear buckling about shape parameter based on the design equations proposed as a theoretical method shown in the existing studies. We was performed the eigenvalue analysis about sinusoidal corrugated plate using finite element analysis program. and then, This result was analyzed the shear buckling tendencies and verified the buckling characteristic changes.

For efficient maintenance management of load facilities, an establishment of asset management system is necessary which helps prediction of maintenance cost and strategic allocation of budget in consideration of toy priority. The main purpose of this study is to suggest asset valuation method, which is practical in conformity with domestic situations, through researches on asset valuation method of load facilities. As a consequence, the management and maintenance system of existing highway facilities needed an innovation involving the concept of asset management. This study discusses the new facility management system suitable to local highway agencies. The new system incorporates asset management concept so that it can analyze the project level facility management solution and it can also improve the budget efficiency for local government. This study also presents systematic method to integrate various facilities for management system.

Wireless monitoring system was established to measure PPWS(Prefabricated Parallel Wire Strand) temperature under PPWS erection in Ulsan Grand bridge. The applicability of it to bridge construction site was being evaluated. Wireless function was worked very well within 2km long distance. Transferred data was being analyzed.

In this study, an automated cable non-destructive test (NDT) system was proposed to monitor the steel cable. Magnetic Flux Leakage (MFL) method was applied for the cable inspection. A multi-channel MFL sensor head was fabricated using Hall sensors and permanent magnets. A wheel based Cable climbing robot was used to improve the accessibility to cable. In addition, remote data transmission and robot control were possible by applying the Wireless LAN communication. Finally, developed element techniques were integrated to MFL based Cable Climbing NDT system, and the field applicability of the integrated cable NDT system was verified through a field test.

This study tried to show the usability of Asian air pollution emission data in order to improve a visibility modeling for the operation of numerical weather prediction models. For this purpose, the three most popular Asian air pollution emission data (TRACE-P, INTEX-B, REAS) were compared with domestic air pollution emission data by root mean square error. In this study, root mean square errors of air pollution materials including SOx, NOx, and VOC in Asia air pollution emission data were analyzed for 2001 and 2006. In the results, INTEX-B would be useful when the measurement data is required, while REAS would be acceptable if multi-year data were required and estimation data were allowed. Air pollutant diffusion model with Asian air pollution data can be used to estimate hourly air pollution concentration data by altitude, which would improve the accuracy of numerical weather prediction models.

There is a limit to the representation of finite element analysis modeling of the pure shear of corrugated plate. However, if the shear force is applied to the corrugated plate, the set of appropriate boundary can be obtained to the nearest theory value. In this study compared Shear buckling strength about each boundary condition with the plate shear theory. And then each boundary condition applied to sinusoidal corrugated plate, evaluate convergence of the minimum shear buckling strength of each boundary condition and shear buckling flow was observed through shear buckling mode shape.

In order to realize these weight lightening, structure was used to high strength thin plate. If thin plate structure is used, buckling about compression is happen so we should consider buckling. Commonly, we use the girder with stiffener to prevent shear buckling but if we use corrugated web, it can be the role of stiffener to buckling This study is developed of program about optimum problem using structure design process and real-valued genetic algorithm. For the optimum design, the objective function is defined weight of sinusoidal corrugated web and conduct by optimization. The program is analyzed by example.

This paper presents the image processing technique for analyzing quantitatively air voids in paste. From the test, the performance of proposed technique was verified.

This study investigates wave propagation characteristics when guided waves propagate in a waveguide surrounded by non-homogeneous media. Assuming that the medium consists of same size elements, the acoustic properties of each element were determined using SWFEM method. The boundary conditions of each element and the waveguide were determined by random number.

In this study, an MFL(Magnetic Flux Leakage)-based NDT(non-destructive test) method was applied to detect the inner damages of steel cable. A steel cable bunch specimen with several types of inner damage was fabricated and scanned by a MFL sensor head to measure the magnetic flux density of the specimen.the measured magnetic flux signal was visualized into a 3D MFL image for convenient cable monitoring. Finally, the results were compared with information on actual inflicted damages to confirm the accuracy and effectiveness of the proposed cable monitoring method.

In this study, a MFL (Magnetic Flux Leakage) image based 3D inspection system which is incorporated into a cable climbing robot was investigated for Steel Cable NDT of Cable-stayed Bridge and Suspension Bridge. Firstly, a MFL sensor head prototype composed of two permanent magnets and eight hall sensors was designed and fabricated. A steel cable specimen with several types of damage was inflicted and scanned by the MFL sensor head to measure the magnetic flux density of the specimen. The measured MFL signals were used to interpret the healthy condition of the steel cable. For improving the resolution and quantification of the damage level, digital signal processing techniques were performed. Finally, the measured MFL signals were visualized by using 3D imaging method.

In this study, a bridge maintenance system is developed to generate performance based maintenance strategy by considering the life cycle cost(LCC). And it is proposed that the concept of generally annual maintenance are practically and easily used to perform LCC analysis. Some of generally annual maintenance data are suggested through existing data analysis due to the proposed concept and LCC analysis of by a real bridge structures is preformed by comparison with a current approach. This paper presents the development of bridge maintenance strategy and can be utilized as an efficient tool to provide the best economical bridge maintenance scenario corresponding to the various constraints and requirements of bridge agency.