In this study, soybean pods of 45 soybean landraces (or varieties) were classified as yellow (19 samples), black (23 samples), or black in green (3 samples) based on soybean seed coat color. Total polyphenol and flavonoid contents were measured, and antioxidant, anti-inflammatory, anti-obesity, and estrogen-like activities were assessed. Total polyphenol and flavonoid content ranges were 24.13-108.03 mg GAE/g and 3.31-72.02 mg CE/g, respectively, and were highest in the black group followed by the yellow group and were least in the black in green group, while ABTS and DPPH activities followed the order black in green > black > yellow. Estrogen-like and estrogen receptor-α activity ranges were 29.06-35.58 pg/mL and 7.05-10.13 pg/mL and were followed the order yellow > black > black in green and black in green > yellow > black, respectively. Nitric oxide (NO) inhibitory and UCP-1 activities followed the same order as estrogen receptor-α activities. Our findings suggest that soybean pods are excellent sources of antioxidants and high-quality functional materials.

The effects of different spray angles (90°, 85°, 80°) on the microstructure and mechanical properties of a Y2O3 coating layer prepared using the atmospheric plasma spray (APS) process were studied. The powders employed in this study had a spherical shape and included a cubic Y2O3 phase. The APS coating layer exhibited the same phase as the powders. Thickness values of the coating layers were 90°: 203.7 ± 8.5 μm, 85°: 196.4 ± 9.6 μm, and 80°: 208.8 ± 10.2 μm, and it was confirmed that the effect of the spray angle on the thickness was insignificant. The porosities were measured as 90°: 3.9 ± 0.85%, 85°: 11.4 ± 2.3%, and 80°: 12.7 ± 0.5%, and the surface roughness values were 90°: 5.9 ± 0.3 μm, 85°: 8.5 ± 1.1 μm, and 80°: 8.5 ± 0.4 μm. As the spray angle decreased, the porosity increased, but the surface roughness did not show a significant difference. Vickers hardness measurements revealed values of 90°: 369.2 ± 22.3, 85°: 315.8 ± 31.4, and 80°: 267.1 ± 45.1 HV. It was found that under the condition of a 90° angle with the lowest porosity exhibited the best hardness value. Based on the aforementioned results, an improved method for the APS Y2O3 coating layer was also discussed.

In this study, the high-temperature oxidation properties of austenitic 316L stainless steel manufactured by laser powder bed fusion (LPBF) is investigated and compared with conventional 316L manufactured by hot rolling (HR). The initial microstructure of LPBF-SS316L exhibits a molten pool ~100 μm in size and grains grown along the building direction. Isotropic grains (~35 μm) are detected in the HR-SS316L. In high-temperature oxidation tests performed at 700oC and 900oC, LPBF-SS316L demonstrates slightly superior high-temperature oxidation resistance compared to HR-SS316L. After the initial oxidation at 700oC, shown as an increase in weight, almost no further oxidation is observed for both materials. At 900oC, the oxidation weight displays a parabolic trend and both materials exhibit similar behavior. However, at 1100oC, LPBF-SS316L oxidizes in a parabolic manner, but HR-SS316L shows a breakaway oxidation behavior. The oxide layers of LPBF-SS316L and HR-SS316L are mainly composed of Cr2O3, Febased oxides, and spinel phases. In LPBF-SS316L, a uniform Cr depletion region is observed, whereas a Cr depletion region appears at the grain boundary in HR-SS316L. It is evident from the results that the microstructure and the hightemperature oxidation characteristics and behavior are related.

The purpose of this study was to select 30 representative Korean dishes by a systematic review of preferences and recognition of Korean foods. The papers for the review were located using the keywords ‘hansik’, ‘hanguk eumsik’ from DBpia, KISS, NDSL and RISS, and 18 relevant papers were finally short-listed. To analyze the preferences of Koreans and foreigners for Korean dishes, respondents were chosen from various regions such as Asia, Europe, South Pacific, Africa, and North/South America. A total of 4,053 respondents participated in the selected papers and Korean dishes were classified according to the content analysis based on books published by the Rural Development Administration (RDA). Among the main dishes, two kinds of cooked rice were selected, bibimbap and kimbap. Also, noodles, dumplings, and sliced rice cake soup varieties mul-naengmyeon, guksujangguk, mandu, and tteokguk were selected as main dishes. The side dishes selected included 6 kinds of soup, miyeokguk, yukgaejang, samgyetang, gomtang, seolleongtang, and galbi-tang. Other side dishes selected were six types of stews namely doenjang-jjigae, kimchi-jjigae, sundubu-jjigae, haemultang, maeuntang, and dakbokkeum- tang. Three kinds of grilled side dishes selected were bulgogi, galbi-gui, and samgyeopsal-gui. Galbi-jjim was selected in the category of braised or steamed foods. Tteokbokki and japchae were the stir-fried food selected. Pan-fried foods and fried foods selected included a kind of haemul-pajeon and dak-gangjeong respectively. Seasoned vegetables selected were samsaek-namul including gosari-namul, sigeumchi-namul and doraji-namul. Two kinds of baechukimchi and kkakdugi were selected as kimchies, and sikhye was selected in the category of beverages and teas. These results could be used as selection criteria in developing recipes for representative Korean menus.

Additively manufactured metallic components contain high surface roughness values, which lead to unsatisfactory high cycle fatigue resistance. In this study, high cycle fatigue properties of selective laser melted Ti-6Al- 4V alloy are investigated and the effect of dry-electropolishing, which does not cause weight loss, on the fatigue resistance is also examined. To reduce the internal defect in the as-built Ti-6Al-4V, first, hot isostatic pressing (HIP) is conducted. Then, to improve the mechanical properties, solution treatment and aging are also implemented. Selective laser melting (SLM)-built Ti64 shows a primary α and secondary α+β lamellar structure. The sizes of secondary α and β are approximately 2 μm and 100 nm, respectively. On the other hand, surface roughness Ra values of before and after dry-electropolishing are 6.21 μm and 3.15 μm, respectively. This means that dry-electropolishing is effective in decreasing the surface roughness of selective laser melted Ti-6Al-4V alloy. The comparison of high cycle fatigue properties between before and after dry-electropolished samples shows that reduced surface roughness improves the fatigue limit from 150 MPa to 170 MPa. Correlations between surface roughness and high cycle fatigue properties are also discussed based on these findings.

돼지 정자의 성 선별에는 일반적으로 유속 세포 분석기를 이용한다. 유속 세포 분석은 DNA량의 차이에 기초하여 정자를 분리하는 기술로써 X 정자와 Y 정자를 90% 정확도로 분리할 수 있다. 그러나 이러한 유속 세포분석 기술은 정자의 손상을 야기해 정자의 기능과 수정능에 영향을 미치므로, 본 연구에서는 특정한 핵산 서열을 탐지할 수 있는 Chromogenic in situ hybridization(CISH)을 그와 비교하여 평가하였다. 유속 세포 분석을

이 연구에서는 현실적이고 유의미한 내진보강비용 산정하기 위해 실제 내진보강 사례를 기반으로 통계분석을 수행하여 건축물의 노후도와 연면적을 고려한 보다 현실적인 내진보강 비용을 추정하는 연구를 수행하였다. 데이터 베이스를 기반으로 노후도에 따라 연면적 대한 내진보강비용을 통계적으로 분석하여 이를 정규화하였고, 역으로 연 면적과 준공연도를 가지고 내진보강공사비용을 역추산할 수 있는 방법을 제안하였다.. 지속적인 내진보강 사업 사례의 빅데이터화가 이루어지면 정확성이 높은 내진보강 비용 산정이 실현될 것으로 판단된다.

구조물의 내진보강의 필요성이 대두되고 있지만 이를 담당하는 기관이나 사람은 내진구조 비전공자로 효과적으로 내진보강사업을 발주 및 관리, 감독하는데 어려움이 있다. 이러한 문제점을 해결하기위해 분석적 계층화 프로세스를 이용하여 보강대상 건축물의 내진보강공법 우선순위를 제안하는 프로그램을 개발하였다. 이를 통해 담당자는 구조물별, 내진성능 부족요인 별 최적의 내진보강공법을 선정할 수 있을 것으로 기대된다.

경주지진 및 포항지진을 통해 우리나라도 지진의 안전지대가 아니라는 인식이 증가하면서 지진피해를 줄일 수 있는 내진 설계에 대한 관심이 증가하고 있다. 본 논문에서는 내진설계 기술 중 현재까지 가장 효과적인 방법의 하나로 알려져 있는 면진구조에 대하여 검토하고자 한다. 이를 위해 중층 RC 건축물에 면진시스템을 적용한 후 경계비선형동적해석을 통해 비면진건축물과 면진건축물의 내진성능효과를 비교 분석하였다.

This study was carried out to investigate the vascular plants of Mt. Choejeong in Gachang-myeon, Daegu. From March 2017 to October 2018, a total of 22 studies were conducted. The vascular plants surveyed were grouped into 560 taxa, including 104 families, 297 genera, 495 species, 4 subspecies, 51 varieties and 10 forma. Endemic plants 15 taxa, Rare plants 5 taxa, Red list plants 5 taxa, Floristic regional indicator plants 54 taxa, Naturalized plants 36 taxa were recorded. Among surveyed 560 taxa, edible, medicinal, ornamental, timber, pasturing, industrial and fiber plants included 246 taxa (29.2%), 228 taxa (27.1%), 164 taxa (19.5%), 61 taxa (7.2%), 13 taxa (1.5%), and 8 taxa (0.9%). And because people are coming and going more frequently than in the past, this will result in more frequent influx of naturalized plants and a threat to the habitat of the plants that are currently growing.

영양고추시험장에서 분양 받은 고추 유전자원 523종에 대한 카로티노이드의 정성 및 정량 분석과 ASTA color 지수를 분석하였다. 개별 카로티노이드는 capsanthin, lutein, zeaxanthin, β-cryptoxanthin, α-carotene, β-carotene 등으로 동정하였다. 총 카로티노이드 함량은 0.5-84.8 mg/100g DW으로 나타났으며 ASTA color 지수는 0.7-233.1로 나타났다. 개별 카로티노이드의 평균갑과 총 카로티노이드 함량에 대한 비율은 β-carotene 5.0 mg/100g DW (24.8%) > capsanthin 5.0 mg/100g DW (24.7%) > zeaxanthin 4.1 mg/100g DW (20.4%) > β-cryptoxanthin 3.0 mg/100g DW (14.8%) > lutein 2.7 mg/100g DW (13.3%) > α-carotene 0.4 mg/100g DW (2.0%) 순으로 분석되었다. 카로티노이드 중 capsanthin의 함량이 ASTA color 지수와 높은 상관관계를 보였으며 (R2 = 0.723) capsanthin이 23.2 mg/100g DW으로 고함유된 자원 IT223599를 선발하였다. 또한 카로티노이드 크로마토그램의 패턴에 따라 고추유전자원을 7가지 그룹으로 구분하였으며 이는 고 색소 함유 품종 육종 등 다양한 산업 소재로 활용 될 수 있다.