We carried out this subject to observe photoisomerization using 8A5H and phospholipid(DLPC) containing azobenzene group which has reversible to cis-trans by light irradiation. We investigated the photoisomerization and property of the monolayer film on quartz substrate prepared by the mixture of 8A5H and phospholipid deposited using Langmuir-Blodgett(LB) method. It was found that the absorption spectrum of the 8A5H and phospholipid LB monolayer was induced to photoisomerization by alternate light irradiation. And the absorbance of both the solution of mixtures of 8A5H-phospholipid and LB film was reversibly changed by the acid-base exposure and alternate temperatures.

In order to study a reversible photoisomerization of disperse red l(DR 1) attached on natural polymers, cellulose acetate containing DR l(DR 1/CA adduct) was prepared, and the changes of UV/VIS spectra of its solution(benzene, DMAc). thick film, and LB film were investigated by alternate irradiation with two different wave length lights. DR 1/CA adduct was prepared through tosylation of partially hydrolyzed cellulose acetate followed by reaction with DR 1 at 100℃ in pyridine. From the UV/VIS spectra of DR 1/CA adduct dissolved in DMAc solvent including phosphoglyceride before and after irradiation at 360nm and 45Onm, we found out the changes of UV/VIS spectra were reversible. In addition, the change of UV/VIS spectra of this adduct solution was strongly depended on the sorts of solvents and temperature. As the temperature was increased, UV/VIS spectra of this adduct solution in DMF showed blue shift. These results provided this solution could be applied to a temperature sensor. In the thick film case, we also obtained similar results with solution case. LB monolayer and trilayer from DR 1/CA adduct was obtained by scattering the solution including phosphoglyceride on water surface at the surface pressure of 8mN/m. After irradiation on that LB monolayer and trilayer, the reversible photoisomerization was also detected. From these results we concluded DR 1/CA adduct was suitable for the application to data storage and optical switch, etc.

Maxwell displacement current(MDC) measuring technique has been applied on the study of monolayers of fatty acid. The displacement current was generated from monolayers on the water surface by monolayer compression and expansion. Displacement current was generated when the area per molecule was about 130a2. MDCs were investigated in connection with monolayer compression cycles. It was found that the current pulses were generated over the entire range of molecular area, and the maximum of MDC appeared at the molecular area just before the initial rise of surface pressure in compression cycles. We investigated the change in absorption spectra of the fatty acid(8A5H) monolayer LB film due to cis-trans photoisomerization. It was found that the absorption spectrum of the 8A5H LB film was induce to photoisomerization by alternate irradiation with UV and visible light irradiation.

The saturated fatty acids(arachidic acid, stearic acid, and palmitic acid) were repeatedly applied on water surface, and their π-A isotherms and Maxwell displacement current(MDC) were measured to identify the effect of the number of carbons of fatty acids on the properties of Langmuir films. The saturated fatty which contain higher carbon number showed higher MDC peak, and the less carbon it contains, the higher surface pressure they show. It was found the maximum of MDC peaks was as the molecular area just before the surface pressure increases in compression cycles of saturated fatty acids.

Displacement current measuring technique has been applied on the study of monolayers of functional polyimide containing azobenzene derivatives. The displacement current was generated from monolayers on the water surface by monolayer compression and expansion. Displacement current was generated when the area per molecule was about 70a2 and 100a2. Displacement currents were investigated in connection with monolayer of long chain alkylamines. It was found that the maximum of displacement current appeared at the molecular area just before the initial rise of surface pressure in compression cycles of polyamic acid and long chain alkylamines.

The absorption spectra of polyamic acid containing p-methoxyazobenzene in a mixture of N, N-dimethylacetamide(DMAC) and benzene(1:1 by volume) solution was induced photoisomerization by UV and visible light irradiation. This solution is influenced on temperature according to measure by UV-Vis Spectrophotometer. Ultra thin film of polyamic acid containing p-methoxyazobenzene was prepared on the hydrophilic quartz plate by Langmuir-Blodgett(LB) method. The precursor LB film was heated in a vacuum dry oven at 120℃ in order to convert it into the LB film of polyimide. The absorption spectra of LB films were also induced photoisomerization by UV and visible light irradiation.

On contraction of the muscles, marked changes in X-ray reflections are observed, suggesting that conformational changes of contractile molecules and the movement of myosin heads during muscle contraction. The time needed to the peak tension after the onset of stimulation and the amount of peak tension depend on the number of twitch cycle. It was found that the successive twitches decreased not only the time needed to the peak tension after the onset of stimulation but also the time needed to the maximum change of the X-ray intensity. However, the difference of the time between the peak tension and the maximum intensity change(Ti-Ii) is nearly the same at any twitch. Based on these results the causes of the decrease of Ti and Ii, and physiological implication of Ti-Ii are discussed.

Maxwell displacement current(MDC) measuring technique has been applied on the study of monolayers of polyamic acid containing p-cyanoazobenzene. The displacement current was generated from monolayers on the water surface by monolayer compression and expansion. Displacement current was generated when the area per molecule was about 140a2 and 100a2. Maxwell displacement currents were investigated in connection with monolayer compression cycles. It was found that the maximum of MDC appeared at the molecular area just before the initial rise of surface pressure in compression cycles.

The absorption spectra of synthesis of long chain fatty acid containing azobenzene start from p-(p'-hydroxy phenyl azo)-benzoic acid was investigated by ultraviolet spectrophotometery in chloroform solvent at the various temperature. In addition, The pressure-area of the water-air interface was obtained and the LB film was fabricated onto a quartz slide and quartz crystal by conventional Langmuir-Blodgett(LB) method. The UV absorption spectra of Langmuir-Blodgett(LB) film on quartz slide and spectrum of monolayer formed on quartz crystal have been measured. Long chain fatty acid containing azobenzene are induced phtoisomerization by the application of u. v. and visible light irradiation alternatively the reversibility of phtoisomerization was more clear difference when the number of Cn increased but, not so good at C14-azo. At the pressure-area isotherms, the value of surface pressure increment were decreased when the number of Cn increased. A surface pressure of 20mN/m was obtained as a proper one for a film deposition. The photoisomerization at LB films were induced by application of UV and visible light irradiation alternatively. So the LB film of long chain fatty acid containing azobenzene has possibility to being applied to functional molecular devices such as photomemory and light switching.

The Synthesis of long chain fatty acid containing azobenzene and (Cn-Azo) was optimized, starting from p-(p'-hydroxy phenyl azo)-benzoic acid and the product of reaction containing azobenzene chromophores was investigated by ultraviolet spectrophotometery in chloroform solvent at the various temperature. In addition, Reversibility and stability of azo compounds have been measured by means of Ultraviolet and the structure of these compound were ascertained by means of FT-IR and NMR. Recrystallization of reaction product in the solvent results the experimental yield obtained about 62.93% p-(p'-octadecyloxy phenyl azo)-benzoic acid. Long chain azobenzene derivatives in chloroform solution are induced photoisomerization by u. v. and visible light irradiation. The solution of long chain fatty acids(Cn-Azo) containing azobenzene are possible of being applied to functional molecular devices such as photomemory and light switching.

The Synthesis of azobenzene containing long chain fatty acid and poly vinyl alcohol by esterification reaction(Cn-Azo-PVA) was optimized, starting from P-(P'-hydroxy phenyl azo)-benzoic acid and the product of reaction containing azobenzene chromophores was investigated by ultraviolet spectrophotometery in toluene solvent at room temperature. In addition, UV absorption spectra of Langmmuir Blodggett (LB) film deposited on quartz plate have been measured and the structure of these compounds were ascertained by means of Ultraviolet and FT-IR. Recrystallization of reaction product in the solvent results the experimental yield obtained about 22.27% P-(P'-octadecyloxy phenyl azo)-benzoic acid-poly vinyl alcohol. Long chain azobenzene derivative-poly vinyl alcohols are induced phtoisomerization by u, v, and visible light irradiation. The LB film of azobenzene containing long chain fatty acids(C18-Azo-PVA) are possible of being applied to functional molecular devices such as photomemory and light switching.

Transesterification reaction between dimethyl phthalate and ethylene glycol was kinetically investigated in the presense of various metal nitrate catalysts at 170℃. The reaction rates measured by the amount of distilled methanol from the reaction vessel. The transesterification reaction was carried out under the first order conditions respect to the concentration of dimethyl phthalate and catalyst, respectively. The over all order was 2nd. By Arrhenius plot, the activation energy was calculated as 17.4kcal/mole and 17.2kcal/mole on the transesterification reaction with zinc nitrate and lead nitrate, respectively. Apparent rate constant, k' was appeared linear about concentration of catalyst.

Transesterification reactions (methyl methacrylate with diethanolamine, ethylene glycol with dimethylphthalate) were kinetically investigated in the presence of zinc compound catalysts at 120~170℃ The amount of reactants was measured by gas chromatography. and the reaction rates also measured from the amount of reaction products and reactants upon each catalyst. The transesterification reactions were carried out under the first order conditions respect to the concentration of reactants, respectively, The overall reaction order was 2nd. The apparent rate constant (k') was found to obey first kinetics with respect to the concentration of catalyst. It shows that according to an increase in basicity of anionic species the rate constant increase, and that a linear relationship exists between ln k and pKa in transesterification reaction of methyl methacrylate with diethanolamine.

Transesterification reactions (methyl methacrylate with monoethanolamine, methyl methacrylate with n-butyl alcohol, dimethylphthalate with ethylene glycol, dimethyl phthalate with monoethanolamine) were kinetically investigated in the presense of various metal acetate catalysts at 110℃. The amount of reactants was measured by gas and liquid chromatography, and the reaction rates also measured from the amount of reaction products and reactants upon each catalyst. The transesterification reactions were carried out under the first order conditions respect to the concentration of reactants, respectively. The overall reaction order was 2nd, Maximum reaction rates were appeared at the range of 1.4 to 1.6 in electronegativity of metal ions and maximum catalytic activities were obserbed at the range of 1.5 to 1,8 in instability constant of metal acetates.

The transesterification reaction between diethanolamine and methyl methacrylate was kinetically investigated in the presence of various metal acetate catalysts at 120℃. The amount of reacted methyl methacrylate was measured by gas chromatography and liquid chromatography, and the reaction rate also measured from the amount of reaction products and reactants under each catalyst. The transesterification reaction was carried out in the first order with respect to the concentration of diethanolamine and methyl methacrylate, respectively. The over-all order is 2nd. The apparent rate constant was found to obey first-order kinetics with respect to the concentration of catalyst. The maximum reaction rate was appeared at the range of 1.4 to 1.6 of electronegativity of metal ions and instability constant of metal acetates.

The transesterification reaction between diethanolamine and methyl-methacrylate was kinetically investigated in the presence of various metal acetate catalysts at 120℃. The quantity of methylmethacrylate reacted in the reaction flask was measured by gas chromatography and liquid chromatography, and the reaction rate was investigated by measuring of the quantity of products and reactnts under various catalysts. The transesterification reaction was carried out in the first order reaction kinetics with respect to the concentration of diethanolamine and methylmethacrylate, respectively. The apparent rate constant was found to obey first-order kinetics with respect to the concentration of catalyst. The linear relationship was shown between apparent rate constant and reciprocal absolute temperature, and by the Arrhenius plot, the activation energy has been calculated as 11.08 Kcal with zinc acetate catalyst, 17.99 Kcal without catalyst. The maximum reaction rate was appeared at the range of 1.4 to 1.6 of electronegativity of metal ions and instability constant of metal acetates.

The transesterification reaction between ethanolamine and methyl-methacrylate was kinetically investigated in the presence of various metal acetate catalysts at 110℃. The transesterification was found to obey first-order kinetice with respect to the concentration of ethanolamine and methyl-methacrylate, respectively. By the Arrhenius plot, the activation energy has been calculated as 11.9 Kcal with lead acetate catalyst, 14.7 Kcal without catalyst. The reactivities has highest value where the electronegativity and instability constant (Kij) values for the metal acetate catalysts are about 1.6.

The transesterification reaction between diethanolamine and dimethylphthalate was kinetically investigated in the presence of various metal acetate catalysts at 130℃. The reaction was followed by the measurement of distilled methanol from the reaction vessel. The transesterification was found to obey first-order kinetics with respect to the concentration of diethanolamine and dimethylphthalate and catalyst, respectively. The reactivities has highest value where the electronegativity and instability constand (Kij) values for the metal acetate catalysts are about 1.6.

Stent thrombosis (ST) is the sudden occlusion of a stented coronary artery because of thrombus formation. ST is a rare, but can result in life-threatening complications. Early stent thrombosis occurs frequently after primary percutaneous coronary intervention (PCI) for acute ST-segment elevation myocardial infarction (STEMI). Here, we report a case of a 59-year-old man with acute stent thrombosis immediately after primary PCI with drug-eluting stent for acute STEMI.