This study tried to develop the system (device) that automatically notify a manager of condition just before and after farrowing to extend ubiquitous-based technology and to increase efficiency of delivery care and productivity by reducing human labor and time on standby when farrowing management is done in the difficult and hard working environment of farrowing such as night or holidays in field sand especially in pig industry. In this test, selected 10 gilts were executed timed artificial insemination and were set up each temperature sensor and load sensor to them 3 days before the estimated farrowing day and were observed the farrowing situation. This study was embodied the NESPOT-based (KT Corporation) monitoring system, the system to transmit data in real time by utilization of wireless LAN and the sensor module to apply the ubiquitous environment to them. And this study was observed the situation to automatically notify situations of 10 gilts that first bore just before and after farrowing. The result obtained the farrowing situations of them in real time by setup of the NESPOT-based monitoring system to check farrowing situation directly is as follow. The average time of the automatic notice about situation just before farrowing by the temperature sensor was 27.5 minutes before the beginning of farrowing (the expulsion time of a piglet). 6 of 8 pregnant gilts that first bore automatically were notified situations just before farrowing and the temperature sensors inserted into 2 ones before farrowing were omitted. (The automatic notice rate 75%) The average time of the automatic notice of situation just after farrowing by the load sensor was taken 46.5 minutes after the beginning of farrowing (the expulsion time of a first piglet). The average gestation period of 8 ones that first bore and were tested by the automatic notice of farrowing situation was 115.6 days. This result found that the automatic farrowing notice system by the temperature sensor is more efficient than the load sensor as the automatic farrowing alarm device and sanitary treatment and improvement of the omission rate were required.

국내산 담수 이매패 펄조개를 이용하여 부영양 저수지 의 표층수를 실험실로 유입∙처리하고 처리수는 다시 저 수지로 환원하는 이른바 ‘흐름형 유기물 제어’ (CROM: continuous removal of organic matters) 기술을 개발하고 하천에서 채취한 모래퇴적물의 첨가가 유기물 제어와 수질에 어떠한 영향을 주는지 조사하였다. CROM은 크게 저류조, 조정조, 처리조, 분석조 등으로 이루어졌으며, 실험은 처리조에 현장수, 현장수+모래, 현장수+패류, 현장수+모래+패류 등을 각각 구성하여 유입속도는 18~25 Lh-1, 패류밀도는 486.1 indiv. m-2, 수온은 15~22􀆆C 범위에서 13일간 실시하였다. 유기물 및 수질 변화를 확인하기 위하여 매일 동일한 시간에 수온, pH, DO, 전도도, 탁도, 염분도, 엽록소 a, 부유물질, TN, TP, NO2, NO3, NH3, PO4 등을 측정하거나 채수하여 곧바로 분석하였다. 연구결과, 미처리수의 반송이 패류의 유기물 제어에 큰 영향을 미치지 않았으며 퇴적물의 첨가에 상관없이 실험기간 동안 80% 이상 유기물(부유물질 및 Chl-a)을 감소시켰으나 높은 농도의 암모니아와 인산 등을 배출하였다. 결국 한국산 이매패 펄조개를 이용한 CROM 운영효과는 매우 뚜렷하였으나 장기간 운영시 유기물 제어능 및 패류 생존율에 미치는 다른 요인들-수온, 미생물, 세정주기 등의 변화가 예상되며, 처리수에 대한 처리 및 활용에 대한 다각적인 연구가 뒤따라야 할 것으로 사료되었다.

철근콘크리트 보에 대한 섬유-강판 복합플레이트의 보강효과를 연구하였다. 합계 12개 철근콘크리트 보 중, 7개는 탄소 섬유-강판 복합플레이트(CSP)로 보강되었으며, 4개는 유리섬유-강판 복합플레이트(GSP)로 보강되었고, 나머지 1개는 비교를 목적으로 보강되지 않았다. 보강보 실험결과, 새로 개발된 섬유-강판 복합플레이트 보강시스템은 보강재의 조기탈락을 제어하여 연성파괴를 유도하는 것으로 나타났다. 본 연구에 사용된 CSP 보강보의 연성지수는 GSP 보강보의 연성지수는 로 측정되었다. ESP 보강보 및 GSP 보강보의 최대하중은 보강하지 않은 기준보에 비해 각각 115%, 107% 향상된 것으로 측정되었다. 또한, 보강보 실험과 해석 결과들은 잘 일치하는 것으로 나타났다.

Small & medium sized company is the most efficient way of management to prevent my accident in the area of industry. Employees are more than 30 to less than 50 persons and which is liable for securing a safety manager on site, is gradually seen on the surface. Even a small company is nothing less than a dead zone from a safety since it's free from his obligation of employing a safety manager. Let us now think about the effective measures against a industrial accident by collecting, reviewing a variety of preventive measures, which is being carried out for preventing an industrial accident happening in a small company, and comparing, analyzing the effect according to the respective measures. Through this research, it's expected to contribute to both the development of small & medium sized company and our national economy with the improvement of a company's competitiveness and the accumulation a technical background by way of prevention from occurring industrial accident in a small & medium sized company, in accordance with an friendly environment of work room to protect the employee from leaving his job.

Small & medium sized company is the most efficient way of management to prevent my accident in the area of industry. Employees are more than 30 to less than 50 persons and which is liable for securing a safety manager on site, is gradually seen on the surface. Even a small company is nothing less than a dead zone from a safety since it's free from his obligation of employing a safety manager. Let us now think about the effective measures against a industrial accident by collecting, reviewing a variety of preventive measures, which is being carried out for preventing an industrial accident happening in a small company, and comparing, analyzing the effect according to the respective measures. Through this research, it's expected to contribute to both the development of small & medium sized company and our national economy with the improvement of a company's competitiveness and the accumulation of technical background by way of prevention from occurring industrial accident in a small & medium sized company, in accordance with an friendly environment of work room to protect the employee from leaving his job.