이 연구의 목적은 척추 자기공명영상 검사 시, 검사시간을 단축할 수 있는 기법인 SENSE와 CS-SENSE를 경추, 흉추, 요추 검사 시 어떤 기법을 적용하는 것이 효과적인지 알아보기 위함이다. 본 연구는 2022년 10월부터 2023년 3월까지 척추질환 및 의심 환자 102명을 대상으로 분석하였다. 사용된 장비는 필립스 사의 3.0T Ingenia Elition X와 20채널 두경부 코일과 44 채널 척추 코일을 사용하였다. 본 연구는 축상 T2강조 고속스핀에코를 SENSE와 CS-SENSE factor 1.5, 2, 3으로 각각 영상을 획득하고, 정량평가는 신호대잡음비와 대조대잡음비를 각 factor 별로 대응 표본 t-test를 진행하였고, 정성평가는 2명의 평가자의 평가점수를 Kruskal-wallis test로 비교하였다. 정량평가 결과, SENSE보다 CS-SENSE가 신호대잡음비와 대조대잡음비가 높게 나왔다. 정성평가 결과, 경추, 요 추는 CS-SENSE 사용 시 평가점수가 높게 나왔고, 흉추는 SENSE 사용 시 평가점수가 높게 나왔다. 결론적으로 척추 MRI 검사 시, 경추, 요추는 CS-SENSE를, 흉추는 SENSE를 사용하는 것이 효과적이다.

Se-79, a fission product of uranium, is present in spent nuclear fuel. Selenium is volatilized from the spent nuclear fuel during the pretreatment of pyroprocessing, and a filter composed of calcium oxide can capture gaseous selenium in the form of CaSeO3. Because Se-79 has a long half-life (3.27E5 years) and selenite ions have high mobility in groundwater, they must be immobilized in a chemically stable form for final disposal. This study used a composition of 50 TeO2 - 10 Al2O3 - 10 B2O3 - 10 Na2O - 10 CaO - 10 ZnO (mol%). High-purity powders of TeO2, Al2O3, H3BO3, Na2CO3, CaCO3, and ZnO were used as glass precursors. The mixed powders were placed in alumina crucibles and melted in an electric furnace under an ambient atmosphere at 800°C for 1 h before being cast on a carbon mold. The obtained glasses were ground into fine powders and then mixed with CaSeO3 powders. The powders were melted in alumina crucibles at 800°C for 1 h. To simulate a seleniumcaptured calcium filter, CaSeO3 was synthesized by a precipitation method using sodium selenite (Na2SeO3) and calcium nitrate (Ca(NO3)2) solutions. The glass samples were analyzed by an X-ray diffractometer (XRD). Retention of Se in tellurite glasses was analyzed by an X-ray fluorescence spectrometer (XRF) and inductively coupled plasma (ICP). The chemical durability of tellurite glass was evaluated through the PCT method.

Radioactive cesium is a heat generated and semi-volitile nuclide in spent nuclear fuel (SNF). It is released gasous phase by head-end treatment which is a pretreatment of pyroprocessing. One of the capturing methods of gasous radioactive cesium is using zeolite. After ion-exchanged zeolite, it is transformed to ceramic waste form which is durable ceramic structure by heat treatment. Various ceramic wasteforms for Cs immobilization have been researched such as cesium aluminosilicate (CsAlSi2O6), cesium zirconium phosphate (CsZr2(PO4)3), cesium titanate (CsxAlxTi8-xO16, Cs2TiNb6O18) and CsZr0.5W1.5O6. The cesium pollucite is composed to aluminosilicate framework and cesium ion incorporated in matrix materials lattices. Many researchers are reported that the pollucite have high chemical durability. In this study, the Cesium pollucite was fabricated using mixtures of aluminosilicate denoted Absorbent product (AP) and Cs2CO3 by calcination and pelletized by cold pressing. The characterization of fabricated pollucite powder and pellets was analyzed by XRD, TGA, SEM, SEMEDS and XRF. The chemical durability of pollucite powder was evaulated by PCT-A and ICP-MS and OES. Thus, the optimal pressure condition without breaking the pellets which is low Cs2O/AP ratio and pelletizing pressure was selected. The long-term leaching test was performed using MCC-1 method for 28 days with the fabricated pollucite pellets. The leachate of leaching test was allard groundwaster and Deionized water and replaced 5 contact periods which is 3 hours, 3 days, 7 days, 14 days and 28 days and analyzed by ICPMS. The leaching rate was shown two stages. The first stage was rapid and relatively large amount of nuclides were leached. The leaching rate was decreased in the second stage. The fractional release rate of this study was shown same trend. These results were similar to previous studies.

Radioactive Cesium is fission products of spent nuclear fuelwith high heat generating nuclide, having a 30 years half-life. Particularly, it is important to make stable waste form because Cs-137 have high solubility and mobility at ground water. The ceramic waste form has higher thermal and structural stability and lower solubility than glass and cement waste form. Various ceramic waste forms for Cs immobilization have been researched such as aluminosilicate (CsAlSi2O6), phosphate (CsZr2(PO4)3), titanate (CsxAlxTi8-XO16) and CsZr0.4W1.5O6. Cs pollucite is incorporated radio-Cesium to aluminosilicate framework by inorganic ion-exchange with zeolite. Therefore, it is an extremely stable structure. In previous study, we are prepared Cs pollucite pellet with various ratio of Cs precursor/matrix materials, and attempted to evaluate applicability as ceramic waste form. Cs pollucite is produced by mixing Mullite and SiO2 obtained by heat treatment Kaolinite with Cs2CO3 in ratios of 0.5, 0.6, 0.7, 0.8. Optimized ratio was 0.5 revealed single pollucite phase and the others exhibited CsAlSiO4 phase with pollucite. Cs pollucite of ratio 0.5 was pelletized under various conditions and evaluated performance as waste form. herein, the pellets were cracked on surface and edges broken. Therefore, Cs pollucite having high ratio of matrix materials contained Si and Al was prepared and pelletized, and then waste form was evaluated. The Cs pollucite powder is ratio of Cs precursor/matrix materials were 0.1, 0.2, 0.3, 0.4. Pollucite powder was mixed with 1.5, 2.0wt% Polyvinyl alcohol as binder, and dried at 70°C for overnight. Afterward, these powders obtained were pressed using punch-die apparatus at 50, 100 bar for 1 hour and the pellets with about dia. 25 mm and height 10 mm was acquired. These pellets were sintered at 1,400°C for 5 hours. Subsequently, the waste forms were evaluated physicochemical test such as compression strength, thermal conductivity, thermal expansion and leaching properties analysis.

Trading card game은 사용자들이 카드를 수집하고 교환하면서 게임을 진행한다. 사용자는 카드별로 존재하 는 특수 능력과 필요 비용 등을 고려하여 카드를 수집한다. 한정판 카드는 카드에 희소가치를 부여하여 사용 자들의 수집욕을 자극하여 구매를 유도할 수 있다. 기존 Trading card game인 Slay the Spire나 Hearths Sto ne는 초기 덱 빌딩할 때, 사용자의 능력보다는 운이 영향을 끼친다. 카드 구성을 변경하는 것이 쉽지 않으므 로, 초기 덱 빌딩 결과가 게임의 승패에 결정적인 영향을 주기도 한다. 반면에, Legends of Runeterra는 게임 의 규칙이 너무 복잡해서, 초보자들이 게임을 어렵다고 느낀다. 이러한 점을 고려하여, 제안하는 게임 매직 파이트는 다음과 같은 특징이 있다. 초보자들도 쉽게 게임을 플레이할 수 있도록, 제안하는 게임은 덱 빌딩 방법을 단순하게 구성한다. 사용자들이 다양한 전략을 시도해 볼 수 있도록, 매 판마다 덱 구성을 변경할 수 있다. 실험결과 덱 빌딩시 카드의 종류를 일부 제한하면 상대적으로 카드 구성이 단순해서, 사용자가 카드의 효과와 이미지를 쉽기 이해하는 경향을 보인다. 반면에, 모든 종류의 카드를 대상으로 덱 빌딩을 하면, 사용 할 수 있는 카드의 수가 상대적으로 많으므로, 사용자가 다양한 전략을 시도해 볼 수 있어서 더 재미있었다 고 응답하였다.

PURPOSES : It is well known that low temperature cracking is one of the most serious distresses on asphalt pavement, especially for northern U.S. (including Alaska), Canada and the northern part of south Korea. The risk of thermal cracking can be numerically measured by estimating thermal stress of a given asphalt mixture. This thermal stress can be computed by low temperature creep testing. Currently, in-direct tensile (IDT) mixture creep test mentioned in AASHTO specification is used for measuring low temperature creep properties of a given asphalt mixture. However, IDT requires the use of expensive testing equipment for performing the sophisticated analysis process, however, very few laboratories utilize this equipment. In this paper, a new and simple performance test (SPT) method: bending beam rheometer (BBR) mixture creep testing equipment is introduced, and the estimated experimental results were compared with those of conventional IDT tests. METHODS: Three different asphalt mixtures containing reclaimed asphalt pavement (RAP) and roofing shingles were prepared in the Korea Expressway Corporation (KEC) research laboratory. Using the BBR and IDT, the low temperature creep stiffness data were measured and subsequently computed. Using a simple power-law function, the creep stiffness data were converted into relaxation modulus, and subsequently compared. Finally, thermal stress results were computed from relaxation modulus master curve using Gaussian quadrature approach with condierations of 24 Gauss number. RESULTS: In the case of the conventional asphalt mixture, similar trends were observed when the relaxation modulus and thermal stress results were compared. In the case of RAP and Shingle added mixtures, relatively different computation results were obtained. It can be estimated that different experimental surroundings and specimen sizes affected the results. CONCLUSIONS: It can be said that the BBR mixture creep test can be a more viable approach for measuring low temperature properties of asphalt mixture compared to expensive and complex IDT testing methods. However, more extensive research and analysis are required to further verify the feasibility of the BBR mixture creep test.