When decommissioning a nuclear power plant, the structure must be made to a disposable size. In general, the cutting process is essential when dismantling a nuclear power plant. Mainly, thermal cutting method is used to cutting metal structures. The aerosols generated during thermal cutting have a size distribution of less than 1 μm. The contaminated structures are able to generate radioactive aerosols in the decommissioning. Radioactive aerosols of 1 μm or less are deposited in the respiratory tract by workers’ breathing, causing the possibility of internal exposure. Therefore, workers must be protected from the risk of exposure to radioactive aerosols. Prior knowledge of aerosols generated during metal cutting is important to ensure worker safety. In this study, the physical and chemical properties of the aerosol were evaluated by measuring the number and mass concentrations of aerosols generated when cutting SUS304 and SA508 using the laser cutting method. High-resolution aerosol measuring equipment (HR-ELPI+, DEKATI) was used to measure the concentration of aerosols. The HR-ELPI+ is an impactor-type aerosol measuring equipment that measures the aerosol number concentration distribution in the aerodynamic diameter range of 6 nm to 10 um in real-time. And analyze the mass concentration of the aerosol according to the diameter range through the impactor. ICP-MS was used for elemental mass concentration analysis in the aerosol. Analytical elements were Fe, Cr, Ni and Mn. For the evaluation of physical and chemical properties, the MMAD of each element and CMAD were calculated in the aerosol distribution. Under the same cutting conditions, it was confirmed that the number concentration of aerosols generated from both materials had a uni-modal distribution with a peak around 0.1 um. CMAD was calculated to be 0.072 um for both SUS304 and SA508. The trend of the CMAD calculation results is the same even when the cutting conditions are changed. In the case of MMAD, it was confirmed that SUS304 had an MMAD of around 0.1 μm in size for only Fe, Cr and Mn. And SA508, Fe, Cr, Ni and Mn were all confirmed to have MMAD around 0.1 μm in size. The results of this study show that a lot of aerosols in the range of less than 1 μm, especially around 0.1 μm in size, are generated when metal is cut using laser cutting. Therefore, in order to protect the internal exposure of workers to laser metal cutting when decommissioning NPPs, it is necessary to protect from nano-sized aerosols beyond micron size.

At high temperatures, molten salt has heat transfer properties like water. Molten salt has the characteristics of a strong natural circulation tendency, large heat capacity, and low thermal conductivity. Unlike sodium, molten salt does not react explosively exothermically with air. However, molten salt has a strong tendency to corrode materials, and its properties are easily changed by a sensitive reaction to oxygen and moisture. Therefore, it is necessary to study material corrosion properties and chemical control methods for nuclear fuel salts, which are eutectic mixtures. In this study, the optimal operation method of the thermal convection loop is established to perform the experiments on the molten salt. The process describes briefly as follows. The operation step consists of preparation, purification, transportation, and operation. In the preparation, the step checks the entire structure and equipment (TC, blower, vacuum pump, etc.). And melt the salt mixture at a high temperature (670°C) slowly in the purification step. Before injecting the molten salt, the surface temperature of the entire loop must retain temperature (about 500°C) constantly. Completely melted molten salt in the melting pot is flow along the pipe of the thermal convection loop in the transportation step. Lastly, the convection of molten salt goes to keep by the temperature difference. The thermal convection loop can be utilized for various experiments such as corrosion tests, component analyses, chemistry control, etc.

Molten salt used in the multipurpose molten salt experiment must be of high purity. Depending on the purpose of the experiment, only the base component of the molten salt be used, or a component simulating a nuclear fission product be added to the base component and used. In all cases, an increase in the concentration of impurities such as oxygen and moisture may lead to an erroneous interpretation when analyzing the experimental results. Therefore, molten salt should be purified before use. In this study, the purification of molten salt is described for multi-purpose molten salt experiments. The salt mixture is selected as MgCl2-NaCl and is quantified at a mixing ratio of 43mol%:57mol%. The salt mixture is treated in a glove box environment because of must minimize the reaction of adsorbing oxygen and moisture when the salt mixture is exposed to the atmosphere. MgCl2 is more likely to contain water than NaCl, the purification of the NaCl-MgCl2 mixture is established according to the purification process for removing water from MgCl2. A process for purifying the salt mixture briefly consists as follows: drying moisture, melting salts, purification, removing HCl, and stabilization. Through the process be able to obtain high-purity molten salt and more accurate experiment results.

This study aimed to examine the effect of a mild elevation in serum cholesterol level in a porcine coronary overstretch restenosis model using a balloon angioplasty catheter or drug-eluting coronary stent. Pigs were divided into two groups and were fed a commercial normal diet (CND, n = 4) or a high-fat diet (HFD, n = 4) for 5 weeks. Coronary overstretch injury by balloon angioplasty or stent implantation was induced in the left anterior descending and left circumflex artery after 1 week of feeding. Histopathological analysis was performed at 4 weeks after coronary injury. During the experiment, the total cholesterol level in the HFD group increased by approximately 44.9% (from 65.9 ± 3.21 mg/dL at baseline to 95.5 ± 9.94 mg/dL at 5 weeks). The lumen area in the CND group was reduced in comparison with that in the HFD group after balloon angioplasty. After stent implantation, the injury score showed no significant difference. There were significant differences in the neointimal area (2.7 ± 0.33 mm2 in the CND group vs. 3.3 ± 0.34 mm2 in the HFD group, p<0.05), lumen area (2.6 ± 0.54 mm2 in the CND group vs. 2.0 ± 0.33 mm2 in the HFD group, p<0.05), and percent area stenosis (52.0 ± 7.96% in the CND group vs. 62.4 ± 5.15% in the HFD group, p<0.05). Body weight change was not different between the two groups. Increased serum cholesterol level activated vascular smooth muscle cell proliferation in the porcine coronary overstretch model.

Euzophera batangensis (Lepidotera: Pyralidae) is seriously damaging trunks or branches of persimmon tree (Diospyros sp.). We tested the attractiveness of (Z)-9-tetradecen-1-ol (Z9-14OH) and (Z9,E12)-tetradeca- 9,12-dien-1-ol (Z9,E12-14OH) with single or blended baits at southern parts of Korea in 2014 and 2015. The monoene was not attractive at all at three places during the two years. In 2014, diene was equally or more attractive than the mixture in Jinju and Suncheon, respectively. In 2015 too, the attractiveness of diene and mixture was not different in Jinju and Munsan. Monitoring of the seasonal occurrence of E. batangesis with the sex pheromone components revealed that it occurred three times a year; the first occurrence from early April to mid May, the second from early Jun to mid July, and the third from late August to late September.

피부 노화의 정도는 기기 분석을 통해 객관적으로 측정 할 수 있다. 본 연구의 목적은 인체 적용 시험을 통해 8000 PPM의 레스베라트릴 트라이아세테이트(RTA)를 함유한 크림의 피부 노화 완화 효과를 평가하는 것이다. 여성 피험자 20명에게 시험 제품을 얼굴에 매일 2회 8주 동안 바르고, 4주마다 기기 분석을 통해 주름, 처짐, 탄력, 진피치밀도, 수분 및 밝기 등을 측정하였다. 시험 제품을 4 주 및 8 주 동안 사용한 결과 총 주름 면적이 감소하고(5.12%, 4.86%), 총 주름 용적이 감소하고(10.53%, 8.41%), 탄력성이 증가하고(2.84%, 3.98%), 진피치밀도가 증가하고(15.65%, 20.80%), 수분이 증가하고(5.83%, 7.37%), 밝기(L* 값)가 증가하 고(0.79%, 1.07%), 피부색(individual typology angle, ITAo)이 밝아졌으며(5.43%, 4.95%), 이들 변화는 통 계적으로 유의하였다(p < 0.05). 시험 기간 동안 모든 참가자에게서 부정적인 피부 반응이 관찰되지 않았다. 본 연구는 시험 제품의 피부 노화 완화 효과를 뒷받침한다.

In this study, we elucidated the molecular mechanism of silymarin by which silymarin may inhibits cell proliferation in human colorectal cancer cells in order to search the new potential anti-cancer target associated with the cell growth arrest. Silymarin reduced the level of c-Myc protein but not mRNA level indicating that silymarin-mediated downregulation of c-Myc may result from the proteasomal degradation. In the confirmation of silymarin-mediated c-Myc degradation, MG132 as a proteasome inhibitor attenuated c-Myc degradation by silymarin. In addition, silymarin phosphorylated the threonine-58 (Thr58) of c-Myc and the point mutation of Thr58 to alanine blocked its degradation by silymarin, which indicates that Thr58 phosphorylation may be an important modification for silymarin-mediated c-Myc degradation. We observed that the inhibition of ERK1/2, p38 and GSK3β blocked the Thr58 phosphorylation and subsequent c-Myc degradation by silymarin. Finally, the point mutation of Thr58 to alanine attenuated silymarin-mediated inhibition of the cell growth. The results suggest that silymarin induces the cell growth arrest through c-Myc proteasomal degradation via ERK1/2, p38 and GSK3β-dependent Thr58 phosphorylation.

Background : The geographical origin of Panax ginseng Meyer, a valuable medicinal plant, is important to both ginseng producers and consumers in the context of economic profit and human health benefits. We therefore aimed to discriminate between the cultivation regions of ginseng using the stable isotope ratios of C, N, O, and S, which are abundant bio-elements in living organisms. Methods and Results : The C, N, O, and S stable isotope ratios were measured by isotope ratio mass spectrometer, and then these isotope ratios profiling was statistically analyzed with chemometrics. The various isotope ratios found in Panax ginseng roots were significantly influenced by region, cultivar, and the interactions between these two factors (P ≤ 0.0002). In particular, δ18O was lower in ginseng roots grown at high altitudes (r = −0.47), while δ34S was higher in ginseng roots grown close to coastal areas (r = −0.48). Chemometric results provided discrimination between the majorities of different cultivation regions. Conclusion : Our case study extends the understanding about the variation of C, N, O, and S stable isotope ratios in ginseng root depending on cultivation region. Hence, the analysis of stable isotope ratios is a suitable tool for discrimination between the regional origins of ginseng samples from Korea, with potential application to other countries.

Background : Corrosion is one of the most devastating problems faced by most industries. Mild steel has played a vital role in various fields due to the excellent mechanical properties of mild steel such as low density, high strength-to-weight ratios, good environmental stability, high thermal conductivity, and corrosion resistance. Methods and Results : The total phenolic contents (TPC) and total flavonoid contents (TFC) of the methanolic extract of C. grandiflora and R. verniciflua leaf have been examined, and its corrosion inhibition performance was investigated by weight loss and electrochemical impedance spectroscopy (EIS) and polarization measurements. The surface morphology of mild steel was analyzed by scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectroscopy (EDX) and by atomic force microscopy (AFM). The percentage composition of polyphenolic compounds was found to be higher in C. grandiflora and R. verniciflua plant extracts, and it was proved to be a superior, eco-friendly, and anti-corrosive inhibitor for mild steel in 1M of H2SO4. The Tafel polarization studies indicate that the plant extract is a mixed-type inhibitor. Scanning electron microscopy/energy -dispersive X-ray spectroscopy (SEM-EDS), and atomic force microscopy (AFM) studies confirmed the formation of a protective film on the metal surface. The corrosion inhibition of the C. grandiflora and R. verniciflua plant extracts was characterized by Fourier transform infrared (FT-IR), UV-visible spectra, and wide-angle X-ray diffraction (XRD) studies; these show the strong interaction between the metal surface and the inhibitor. Conclusion : The methanolic extract was prepared the two different plants like C. grandiflora, and R. verniciflua was studied the corrosion inhibition on the mild steel specimen in acidic medium through various methods involving weight loss measurements, EIS, and potentiodynamic polarization. The results shows that the C. grandiflora, and R. verniciflua plant extracts illustrate an effective corrosion inhibitor for mild steel with good anticorrosion properties in acidic environmen

Background : The natural stable isotope ratio of common bio-elements like carbon (C), nitrogen (N), oxygen (O), or sulfur (S) varies with diverse isotope fractionation processes in nature. Therefore, measuring the variation of these stable isotope ratios in ginseng roots can be a feasible tool to discriminate the geographical origins of ginseng in Korea. Methods and Results : The 3-year-old six Korean ginseng cultivars were cultivated at the five regions in Korea, and then used for measuring the stable isotope ratios of C, N, O, and S by isotope ratio mass spectrometry (IRMS). The mean C, N, O, and S stable isotope ratio values in the ginseng roots significantly differed according to the cultivation regions (p < 0.05). However, these isotope ratios in ginseng roots had relatively weak discriminative power against to the ginseng cultivars at each cultivation region. The interaction of the cultivation region and ginseng cultivar type also significantly affected to the C, N, O, and S stable isotope ratio in ginseng roots (p < 0.0001). The two-dimensional plots associated with the N stable isotope ratio can effectively separate the ginseng roots in Jinan compared to those in the other regions. The partial least squares-discriminant analysis showed more significant separation between ginseng geographical origins compared to the principal component analysis. Conclusion : Our findings improve our understanding of how the isotope composition of ginseng roots varies with respect to cultivation regions and cultivars, and suggest that the analysis of the stable isotope ratios combined with chemometrics can be used as a feasible tool to discriminate geographical origin of ginseng in Korea.

Soybean mosaic virus (SMV), a member of Potyviridae family, is one of the most typical viral diseases and results in yield and quality loss of cultivated soybean. Due to the depletion of genetic resources for resistance breeding, a trial of genetic transformation to improve disease resistance has been performed by introducing SMV-CP and HC-Pro gene by RNA interference (RNAi) method via Agrobacterium-mediated transformation. Transgenic plants were infected with SMV strain G5 and investigated the viral response. As a result, two lines (3 and 4) of SMV-CP(RNAi) transgenic plants and three lines (2, 5 and 6) of HC-Pro(RNAi) transgenic plants showed viral resistance. In genomic Southern blot analysis, most of lines contained at least one T-DNA insertion in both SMV-CP(RNAi) and HC-Pro(RNAi) transgenic plants. Subsequent investigation confirmed that no viral CP and HC-Pro gene expression was detected in two SMV-resistant lines of SMV-CP(RNAi) and three lines of HC-Pro(RNAi) transgenic plants, respectively. On the other hand, non-transgenic plants and other lines showed viral RNA expression. Viral symptoms affected seed morphology, and clean seeds were harvested from SMV-resistant line of SMV-CP(RNAi) and HC-Pro(RNAi) transgenic plants. In addition, strong viral gene expression was detected from seeds of SMV-susceptible non-transgenic plants and SMV-susceptible transgenic lines. When compared the viral resistance between SMV-CP(RNAi) and HC-Pro(RNAi) transgenic plants, soybean transgenic plants with the HC-Pro gene using RNAi strategy showed much stronger and higher frequency of viral resistance.

Twenty two common millet (Panicum miliaceum L.) varieties collected from Korea, China and Russia were investigated for their phylogenetic relationship using 5S ribosomal DNA sequences with a hope to provide the basic information on their exact origin. Sequences of 5S rDNA were isolated by PCR. The primers, 5s-rRNA1 and 5s-rRNA2, were designed to isolate the complete NTS. Genomic DNA amplification produced two fragments with different length, 900 bp and 400 bp fragments, confirming the presence of two types of 5S rDNA repeats that differed from each other in the length of the NTS region. Amplified DNAs of 400 bp fragment were subcloned and used for further investigation. The obtained NTS sequences ranged from 200 to 300 bp and homology of sequences among plant materials was much higher than long repeat. CLUSTALW multiple aligment of 5S rDNA sequences from 22 different common millets revealed the clear difference by their origin. And critically different areas with insert or deletion were also confirmed. Those sequence difference seems to be used for discrimination of cultivars from different origin and use as molecular markers for origin identification. In phylogenic tree construction, the clear classification was shown where the genotypes from China and Russia is positioned together and stay away from domestic genotypes.

Citrus is one of the major fruits produced in Korea. There are about 20 species mainly grown in Jeju Island, Korea. Four representative species, which are quite different in the shape of leaf and the taste of fruit, were selected and were used to profile the transcriptomes. These species are ‘Miyagawa Wase’ (C. unshiu Marcov.) satsuma mandarin, ‘Kiyomi’ (C. unshiu Marcov. × C. sinensis) mandarin hybrid, ‘Dangyuja’ (C. grandis) and ‘Natsudaidai’ (C. natsudaidai). Classification of the up-regulated and down-regulated genes using the Cluster of Orthologous Groups of proteins (COG) database reveals that the number of genes included in each group differed significantly among the four species. Several genes that showed significant differences in expression on the microarray were selected and their expression patterns were examined by reverse transcription- ploymerase chain reaction. Metabolic genes such as tyrosine decarboxylase and β-glucosidase ligase were found to be highly expressed in Miyagawa Wase, relative to other species. On the other hand, the expression level of mannose phosphate isomerase was lower in Miyagawa Wase. An efflux pump gene was found to be up-regulated in Kiyomi, whereas cinnamyl-alcohol dehydrogenase was down-regulated. β-carotene 15,15’-dioxygenase, which is involved in the vitamin metabolism, was up-regulated in Natsudaidai. Interspecific differentiations of gene expression are analyzed in terms of the metabolic pathways and their possible roles in citrus species.

Wild rice might have previously unidentified genes important for disease resistance and stress tolerance in response to biotic and abiotic stresses. A set of subtractive library was constructed both from leaves of wild rice plants, Oryza grandiglumis (CCDD, 2n=48), treated with fungal elicitor and from wounded leaves. A partial fragment that was homologous to PR10 genes from other plant species was identified via suppression subtractive hybridization and cDNA macroarray. The obtained full-length cDNA sequence (OgPR10) contains an open reading frame of 480 bp nucleotide, encoding 160 amino acids with a predicted molecular mass of 16.944 kDa and an isoelectric point (pI) of 4.91. The multiple alignment analyses showed the higher sequence homology of OgPR10 with PR10 genes identified in rice plants at amino acid level. The OgPR10 mRNA was not expressed by treatment with wounding, jasmonic acid, and salicylic acid, but markedly expressed in leaves treated with protein phosphatase inhibitors cantharidin and endothall, and yeast extract. In addition, the expression of OgPR10 mRNA was induced within 72 h after treatment with probenazole, one of well-known chemical elicitors, and reached the highest level at 144 h. Heterologous expression of OgPR10 caused growth inhibition and seedling lethality in E. coli and Arabidopsis, respectively. Chemically induced OgPR10 expression with glucocorticoid-mediated transcriptional induction system further reconfirmed its lethality on Arabidopsis seedling. In addition, OgPR10-expressing rice plants, Oryzae sativar were resistant against the infection of rice blast fungus, Magnaporthe grisea. These results indicate that OgPR10 is involved in probenazole- and microbe associated molecular patterns-mediated disease resistance responses in plants and is a potential gene for developing disease resistance crop plants.