많은 연구에 따르면 Tenebrio molitor은 유충 단계에서 플라스틱을 섭취할 수 있다고 보고되었다. 이 연구의 목적은 T. molitor 유충의 성장과 발달에 발포폴리스티렌 섭취가 미치는 영향을 조사하는 것이다. 밀기울을 섭취한 유충의 성장률은 발포폴리스티렌을 섭취한 유충의 성장률보다 더 좋았고(p < 0.001) 발포폴리스티렌을 섭취한 유 충의 번데기로 전환되는 기간은 밀기울을 섭취한 유충의 번데기로 전환되는 기간보다 더 빨랐다(p < 0.001). 하지만 두 처리구간 생존율은 유의미한 차이가 없었다(p = 0.786). 이 결과에 따르면 발포폴리스티렌을 섭취한 유충은 체중 감소와 짧은 발육기간이 특징이지만 생존하는 것에는 문제가 없었다. 따라서 우리는 T. molitor가 플라스틱 폐기물 의 지속 가능하고 친환경적인 제거를 위한 주요 자원이라는 결론을 내렸다.

거저리는 식품으로 사용되기 때문에 유충기가 오래 지속되면 더 좋다. 반면에 거저리의 개체수 유지를 위 해 성장을 가속화하기 위해서는 유충이 빨리 성충이 되면 더 좋다. 이 연구에서는 개체군 밀도가 거저리의 발달 시 간에 미치는 영향을 구명하였다. 이를 위해 상단 7 cm, 하단 5 cm, 높이 3 cm 크기의 용기를 사용했다. 거저리는 용기 당 1, 2, 5, 10, 20마리의 밀도로 용기에서 서식하였다. 용기에 밀기울 1 g을 넣고 거저리의 먹이 여부에 따라 라벨을 붙였다. 실험은 세 번 반복되었다. 모든 실험에서 개체군 밀도가 높을수록 유충에서 번데기로의 변환 시간이 짧았 지만 번데기에서 성충으로 변환되는 시간은 크게 다르지 않았다. 또한 먹이가 있는 그룹에서 번데기로의 변환 시간 이 단축되었지만, 성충으로 변환되는 시간에는 차이가 없었다. 이 연구 결과는 유충기를 연장하기 위해 더 낮은 밀 도가 필요하고 더 빠른 속도로 성충이 필요하다면 밀도가 더 높아야 한다는 것을 보여주었다. 결론적으로 거저리의 발달 시간은 개체수 밀도에 의해 제어할 수 있을 것이다.

Haemaphysalis longicornis는 사람과 동물에게 여러 심각한 병원체를 전달하는 주요 매개체로, 한반도에 널리 분포하고 있다. H. longicornis는 Rickettsia spp., Borrelia spp., Francisella spp., Coxiella spp., 그리고 중증열성혈소판 감소증후군 바이러스 (SFTS virus) 등을 매개하는 것으로 알려져 있다. 국내에 서식하는 H. longicornis의 미생물 군집과 관련된 연구는 많이 진행되지 않은 것으로 확인되었다. 이 연구는 한반도 내 다양한 지역에서 채집된 H. longicornis의 미생물군집 다양성을 지역별, 성장 단계 및 성별에 따라 분석하였다. 2019년 6월부터 7월까지 질병관리청 권역별기후변화매개체감시거점센터 16개 지역에서 채집한 H. longicornis의 16S rRNA 유전자 V3-V4 영역을 PCR로 증폭 후 Illumina MiSeq 플랫폼으로 시퀀싱하였다. Qiime2를 활용한 미생물 다양성 분석을 통해 총 46개의 샘플에서 1,754,418개의 non-chimeric reads를 얻었으며, 평균 126개 의 operating taxonmic unit (OTU) 을 식별하여 총 1,398개의 OTU를 확인하였다. 대부분의 지역에서 Coxiella spp.가 우점종으로 나타났으며, 특히 Coxiella endosymbiont는 가장 높은 우점도를 보이며, Coxiella burnetii와 계통 발생 학적으로 유사한 것으로 확인되었다. 이 연구를 통해 분석된 결과는 각 지역의 H. longicornis 미생물군집 데이터 베이스 구축에 활용되었으며, 이를 통해 지역별 미생물군집의 특이성을 식별할 수 있게 하였다. 이는 한반도의 H. longicornis에 의한 질병 전파 연구와 이를 통한 공중보건 개선에 기여할 것으로 기대된다.

The purpose of this study is to select various insect species for healing resources and develop a healing program in order to use insect as a healing agriculture. In this study, there are two kinds of breeding kit were developed, one for Gryllus bimaculatus and the other for Oxya chinensis sinuosa. Using these insect breeding kits, we conducted a survey of 60 children and the elderly. In the case of children, the results of the insect breeding satisfaction showed that 30.6% said that the sound of crickets was very good, and 11.1% said that it was good. In addition, the higher the child's awareness of insects, the higher the proportion of children who wanted to raise insects in the future. As a result of a survey of seniors, 45.2% do not like insects and 51.6% are not interested, meaning that most seniors are not very interested in insects. However, the emotions after breeding insects showed positive results, with 45.2% saying their personality became brighter, 48.4% reducing their anger, 48.4% relieving their irritation, 54.8% relieving loneliness, 58.1% feeling more responsible, and 51.6% developing intimacy.

Molten chloride salts have received considerable research attention as potential nuclear fuel and coolant candidates for molten salt reactors. However, there are several challenges, especially for structural materials due to the selective dissolution of chromium (Cr) in the molten chloride salts environment. Understanding the compatibility of uranium (U), which is used as nuclear fuel in molten salt reactors, with Cr in molten chloride salts is critical for designing the molten salt reactor structure. Therefore, in this study, the cyclic voltammetry (CV) was used to investigate the electrochemical behaviors of U and Cr. The diffusion coefficients and formal potentials were obtained. The electrochemical properties of uranium and chromium were investigated by CV in molten NaCl-MgCl2 salt at 600°C. Tungsten rods for working and counter electrode, and Ag/AgCl for reference electrode were utilized in this experiment. UCl3 made from the chemical dissolution of U rods and CrCl2 (Sigma-Aldrich, 99.99%) were used. Diffusion coefficients (D) of U and Cr were calculated by measuring reduction peak current of U3+/U and Cr2+/Cr from CV curves and using the Berzins-Delahay equation; D (U3+/U) = 3.0×10-5 cm2s-1 and D (Cr2+/Cr) = 3.3×10-5 cm2s-1. The formal potentials were also calculated by using the reduction peak potential obtained from CV results; E0’ (U3+/U) = -1.173 V and E0’ (Cr2+/Cr) = -0.321 V. The ionization tendency was investigated by comparing each reduction peak potential. The reduction peak potential Ep,c was increasing order of Ep,c (U3+/U) < Ep,c (Cr2+/Cr) < Ep,c (U4+/U3+). It can be seen that in the presence of U4+ and Cr metals, the Cr in the alloy can dissolve into Cr2+, but in the presence of U3+ and Cr metals, the Cr in the alloy does not dissolve into Cr2+. By analyzing the CV curve, diffusion coefficients and formal standard potentials were obtained. The result of comparing reduction peak potentials suggests that the nuclear fuel using U4+ should be inhibited to prevent the selective dissolution of Cr.

The ultimate objective of deep geological repositories is to achieve complete segregation of hazardous radioactive waste from the biosphere. Thus, given the possibility of leaks in the distant future, it is crucial to evaluate the capability of clay minerals to fulfill their promising role as both engineered and natural barriers. Selenium-79, a long-lived fission product originating from uranium- 235, holds significant importance due to its high mobility resulting from the predominant anionic form of selenium. To investigate the retardation behaviors of Se(IV) in clay media by sorption, a series of batch sorption experiments were conducted. The batch samples consisted of Se(IV) ions dissolved in 0.1 M NaCl solutions, along with clay minerals including kaolinite, montmorillonite, and illite-smectite mixed layers. The pH of the samples was also varied, reflecting the shift in the predominant selenium species from selenious acid to selenite ion as the environment can shift from slightly acidic to alkaline conditions. This alteration in pH concurrently promotes the competition of hydroxide ions for Se(IV) sorption on the mineral surface as the pH increases and impedes the selective attachment of selenium. The acquired experimental data were fitted through Langmuir and Freundlich sorption isotherms. From the Freundlich fit data, the distribution coefficient values of Se(IV) for kaolinite, montmorillonite, and illite-smectite mixed layer were derived, which exhibited a clear decrease from 91, 110, 62 L/kg at a pH of 3.2 to 16, 6.3, 12 L/kg at a pH of 7.5, respectively. These values derived over the pH range provide quantitative guidance essential for the safety assessment of clay mineral barriers, contributing to a more informed site selection process for deep geological repositories.

The domestic Pressurized Heavy Water Reactor (PWHR) nuclear power plant, Wolsong Unit 1, was permanently shut down on December 24, 2019. However, research on decommissioning has mainly focused on Pressurized Water Reactors (PWRs), with a notable absence of both domestic and international experience in the decommissioning of PHWRs. If proper business management such as radiation safety and waste is not performed, it can lead to increased business risks and costs in decommissioning. Therefore, the assessment of waste volume and cost, which provide fundamental data for the nuclear decommissioning process, is a crucial technical requirement before initiating the actual decommissioning of Wolsong Unit 1. Decommissioning radiation-contaminated structures and facilities presents significant challenges due to high radiation levels, making it difficult for workers to access these areas. Therefore, technology development should precede decommissioning process assessments and safety evaluations, facilitating the derivation of optimal decommissioning procedures and ensuring worker safety while enhancing the efficiency of decommissioning operations. In this study, we have developed a program to estimate decommissioning waste amounts for PHWRs, building upon prior research on PWR decommissioning projects while accounting for the specific design characteristics of PHWRs. To evaluate the amount of radioactive waste generated during decommissioning, we considered the characteristics of radioactive waste, disposal methods, packaging container specifications, and the criteria for the transfer of radioactive waste to disposal operators. Based on the derived algorithm, we conducted a detailed design and implemented the program. The proposed program is based on 3D modeling of the decommissioning components and the calculation of the Work Difficulty Factor (WDF), which is used to determine the time weighting factors for each task. Program users can select the cutting and packaging conditions for decommissioning components, estimate waste amount based on the chosen decommissioning method, and calculate costs using time weighting factors. It can be applied not only to PHWRs, but also to PWRs and non-nuclear fields, providing a flexible tool for optimizing decommissioning process.

The thermocatalytic decomposition of methane is a promising method for hydrogen production. To determine the cause of carbonaceous catalyst deactivation and to produce high-value carbon, methane decomposition behavior and deactivated catalysts were analyzed. The surface properties and crystallinity of a commercial activated carbon material, MSP20, used as a methane decomposition catalyst, varied with the reaction time at a reaction temperature of 900 °C. During the initial reaction, MSP20 provided a methane conversion of ≥ 50%; however, the catalyst exhibited rapid deactivation as crystalline carbon grew at surface defects; after 15 min of reaction, approximately 33% methane conversion was maintained. With increasing reaction time, the specific surface area of the catalyst decreased, whereas crystallinity increased. The R-square value of the conversion–crystallinity relationship was significantly higher than that of the conversion–specific surface area relationship; however, neither profile was linear. The activity of the activated carbon catalyst for methane decomposition is mainly determined by the complex actions of the specific surface area and defect sites. The activity was maintained after an initial sharp decline caused by the continuous growth of crystalline carbon product. This study presents the application of carbonaceous catalysts for the decomposition reaction of methane to form COx- free hydrogen, while simultaneously yielding porous carbon materials with an improved electrical conductivity.

최근 국내에서는 꿀벌 대량소실 현상이 2022년부터 전국적으로 발생하고 있다. 우리나라 뿐 만 아니라, 전세계 적으로 양봉산업에 큰 위협이 되고 있는 봉군붕괴현상은 2016년 미국에서 세계 최초로 보고되었다. 국내에서는 2022년 민관 합동조사 결과, 이상기온, 응애, 말벌 등이 주요 원인으로 지목되었다. 대량소실 현상을 보인 양봉농 가와 정상 농가의 병원체 검출 비교 결과, 유의성있게 검출이 증가되는 병원체는 발견되지 않았다. 그러나, Tyrophagus mite, Trypanosome, Lake Sinai virus, Apis mellifera filamentous virus 등의 신종 응애, 원충 및 바이러 스 감염이 추가로 확인되었다. 국내에서 새롭게 감염이 확인된 기생충과 병원체가 대량소실, 나아가 봉군붕괴현 상에 직간접적으로 영향을 주었을 것으로 사료되며, 지속적인 조사와 연구개발을 통해 기후등 환경변화에 따른 신종 질병 검색과 대책을 마련해야 할 것이다.

주방세제의 진딧물 살충효과와 분국화 생육에 미치는 영향 을 알아보기 위해 실험을 수행하였다. 복숭아혹진딧물과 목화 진딧물을 대상으로 주방세제 100, 200, 400배액 단용처리와 주방세제 400배액 100mL에 소주 10mL 또는 20mL를 혼용 하여 분무 처리하였다. 그 결과 주방세제 400배 이하의 모든 농도에서 복숭아혹진딧물은 85%, 목화진딧물은 90%의 살충 률을 보였다. 주방세제와 소주 혼용처리에 의한 살충효과 상 승은 보이지 않았다. 하우스안에서 진딧물이 많이 발생한 분 국화 잎에 400배액 이하의 농도로 3일 간격으로 2회 처리함 으로써 90% 이상의 진딧물이 감소되는 효과를 얻을 수 있었 다. 또한 분국화를 재배하면서 3~4일 간격으로 5주간 지속적 으로 주방세제를 처리했을 때, 대조구에서는 90% 잎에서 진 딧물이 발생한데 비해, 모든 주방세제 단독 처리구에서는 발 생율이 15% 이하로 낮게 유지되었다. 또한 국화의 생체중, 초 장, 엽수는 주방세제 농도가 높아질수록 조금씩 낮아지는 경 향이었으나, 초폭이나 분지수에서는 차이가 없었다. 그러나 주방세제 200배 이하의 농도에서는 국화의 잎이 갈변되거나 꽃잎 끝이 백화되는 약해가 관찰되었다.

With the aging of nuclear power plants (NPPs) in 37 countries around the world, 207 out of 437 NPPs have been permanently shutdown as of August 2022 according to the IAEA. In Korea, the decommissioning of NPPs is emerging as a challenge due to the permanent shutdown of Kori Unit 1 and Wolsong Unit 1. However, there are no cases of decommissioning activities for Heavy Water Reactor (HWR) such as Wolsong Unit 1 although most of the decommissioning technologies for Light Water Reactor (LWR) such as Kori Unit 1 have been developed and there are cases of overseas decommissioning activities. This study shows the development of a decommissioning waste amount/cost/process linkage program for decommissioning Pressurized Heavy Water Reactor (PHWR), i.e. CANDU NPPs. The proposed program is an integrated management program that can derive optimal processes from an economic and safety perspective when decommissioning PHWR based on 3D modeling of the structures and digital mock-up system that links the characteristic data of PHWR, equipment and construction methods. This program can be used to simulate the nuclear decommissioning activities in a virtual space in three dimensions, and to evaluate the decommissioning operation characteristics, waste amount, cost, and exposure dose to worker. In order to verify the results, our methods for calculating optimal decommissioning quantity, which are closely related to radiological impact on workers and cost reduction during decommissioning, were compared with the methods of the foreign specialized institution (NAGRA). The optimal decommissioning quantity can be calculated by classifying the radioactivity level through MCNP modeling of waste, investigating domestic disposal containers, and selecting cutting sizes, so that costs can be reduced according to the final disposal waste reduction. As the target waste to be decommissioning for comparative study with NAGRA, the calandria in PHWR was modeled using MCNP. For packaging waste container, NAGRA selected three (P2A, P3, MOSAIK), and we selected two (P2A, P3) and compared them. It is intended to develop an integrated management program to derive the optimal process for decommissioning PHWR by linking the optimal decommissioning quantity calculation methodology with the detailed studies on exposure dose to worker, decommissioning order, difficulty of work, and cost evaluation. As a result, it is considered that it can be used not only for PHWR but also for other types of NPPs decommissioning in the future to derive optimal results such as worker safety and cost reduction.

Ulva compressa Linnaeus (UCL) is a green algae seaweed that performs photosynthesis and is used as a food material in some Asian regions including Korea. It is known to be the dominant species in copper ion-contaminated seas, and many studies on copper ion resistant mechanisms have been reported. UCL is known to have an excellent antioxidant effect, but limited information is available regarding its other physiological activities. In this study, we investigated the anticancer activity of 30% prethanol extracts of Ulva compressa Linnaeus (30% PeUCL) and the underlying mechanisms of its activity on human FaDu hypopharyngeal squamous carcinoma cells. The 30% PeUCL extracts suppressed FaDu cell viability without affecting normal cells (L929), as determined by MTT and viability assays. Furthermore, the 30% PeUCL extracts induced apoptosis, as determined by DAPI staining. The 30% PeUCL extracts inhibited colony formation effectively as well as wound-healing of FaDu cells, even at noncytotoxic concentrations. In addition, 30% PeUCL extracts induced apoptosis significantly through proteolytic cleavage of caspase-3, -7, and -9, and poly (ADP-ribose) polymerase, and by downregulation of Bcl-2 and upregulation of Bax in FaDu cells, as determined by Western blot analysis. Collectively, these results suggest that the inhibitory effect of 30% PeUCL extracts on the growth of oral cancer cells, colony formation and wound-healing may be mediated by caspase- and mitochondrial-dependent apoptotic pathways in human FaDu hypopharyngeal squamous carcinoma cells. Therefore, 30% PeUCL extracts can be administered as a natural chemotherapeutic drug for the treatment of human oral cancers.