The Spectro-Photometer for the History of the Universe, Epoch of Reionization and Ices Explorer (SPHEREx) will provide all-sky spectral survey data covering optical to mid-infrared wavelengths with a spatial resolution of 6.′′2, which can be widely used to study galaxy formation and evolution. We investigate the galaxy-galaxy blending in SPHEREx datasets using the mock galaxy catalogs generated from cosmological simulations and observational data. Only ∼0.7% of the galaxies will be blended with other galaxies in all-sky survey data with a limiting magnitude of 19 AB mag. However, the fraction of blended galaxies dramatically increases to ∼7–9% in the deep survey area around the ecliptic poles, where the depth reaches ∼22 AB mag. We examine the impact of the blending in the number count and luminosity function analyses using the SPHEREx data. We find that the number count can be overestimated by up to 10–20% in the deep regions due to the flux boosting, suggesting that the impact of galaxy-galaxy blending on the number count is moderate. However, galaxy-galaxy blending can marginally change the luminosity function by up to 50% over a wide range of redshifts. As we only employ the magnitude limit at Ks-band for the source detection, the blending fractions determined in this study should be regarded as lower limits.

Fungal contaminant in the indoor air is one of risk factors that could damage valuable paper-based records preserved in libraries. In the process of monitoring airborne fungi at the Nara Repository, the National Archives, Seoul, Korea, three fungal strains, DUCC 16098, DUCC 17764, and DUCC17767 were isolated from the archive’s air samples. Fungal identification was performed based on the morphological characteristics and phylogenetic analysis of the internal transcribed spacer (ITS), the 28S LSU rDNA, and β-tubulin gene (BenA), and TEF1-α gene. These DUCC 16098, DUCC 17764 and DUCC17767 strains were identified as Clonostachys farinosa, Penicillium cosmopolitanum, and Cephalotrichum purpureofuscum. These species have not been recorded before in Korea. Information on these fungi will help the monitoring and management of airborne fungi in the archival facilities.

The thermal treatment of radioactive waste attracts great attention. The thermal treatment offers lots of advantages, such as significant volume reduction, hazard reduction, increase of disposal safety, etc. There are various thermal technologies to waste. The developed technologies are calcination, incineration, melting, molten salt oxidation, plasma, pyrolysis, synroc, vitrification, etc. The off-gas treatment system is widely applied in the technologies to increase the safety and operation efficiency. The thermal treatment generates various by-product and pollutants during the process. The dust or fly ash are generated as a particulate from almost every radioactive waste. The treatment of PVC related components generates hydrogen chloride, which usually brings corrosion of facility. The treatment of rubber and spent resin generates sulfur oxide, SOx. The treatment of nitrile rubber generates nitrogen oxide, NOx. The incomplete combustion of radioactive waste usually generates carbon oxide, COx. The process temperature also affects the generation of off gas, such as NOx and/or COx. Various off gas treatment components are organized for the proper treatment of the previously mentioned materials. In this study systematical review on off gas treatment will be reported. Also, worldwide experiences and developed facility will be reported.

The primary purpose of high temperature process of radioactive waste is to satisfy the waste acceptance criteria and volume reduction. The WAC offers the guideline of waste form fabrication process. The WAC is defined as quantitative or qualitative criteria specified by the regulatory body, or specified by and operator and approved by the regulatory body, for radioactive waste to be accepted by the operator of a repository for disposal, or by the operator of a storage facility for storage. The main objective of WAC is to protect staff and general public and environment by the containment of radioactive material, limit external radiation level, and prevent criticality. The WAC also offers systematic management of radioactive waste by standardization of waste management operations, facilitation waste tracking, ensure safe and effective operation of operating facilities, etc. Since the high temperature process for radioactive waste is considered in many countries, lots of codes and standards are considered. In many WACs, compressive strength, thermal cycle stability, radiation exposure stability, free liquid, and leachability are evaluation to understand the effect of solidified form to the disposal facility. In this paper, systematical review on waste form will be discussed. In addition, brief result of characterization of waste form will be compared.

During the operation of nuclear power plant (NPP), the concentrates and spent resin are generated. They show relatively high radioactivity compared to other radioactive waste, such as dry active waste, charcoals, and concrete wastes. The waste acceptance criteria (WAC) of disposal facility defines the structure and property of treated waste. The concentrates and spent resin should be solidified or packaged in high integrity container (HIC) to satisfy the WAC in Korea. The Kori NPP has stored history waste. The large concrete package with solidified concentrates and spent resin. The WAC requires identification of 18 properties for the radioactive waste. Since some of the properties are not clearly identified, the large concrete packages could not satisfy the WAC in this moment. The generation of the large concrete package (rectangular type and cylindrical type), pretreatment of the package, treatment of inner drum, process development for clearance waste, etc. will be discussed in this paper. In addition, the conceptual design of whole treatment process will be discussed.

We investigated the functional response of aphid parasitoid, Aphidius colemani Viereck (Hymenoptera: Braconidae), on the green peach aphid, Myzus persicae (Sulzer) (Hemiptera: Aphididae) at four different constant temperatures (15, 20, 25 and 30℃). Seven host densities (2, 4, 8, 16, 32, 64, and 128) were used during a 24-h period. A type III functional response for A. colemani was fit separately at each constant temperature. The estimated handling times at 15, 20, 25, and 30℃ were 0.85, 0.61, 0.41 and 0.88 day, respectively. The proportion of aphids that were parasitized showed the similar characteristics curve at four different constant temperatures.

During the operation of the nuclear power plant, various radioactive waste are generated. The spent resin, boron concentrates, and DAW are classified as a generic radioactive waste. They are treated and stored at radioactive waste building. In the reactor vessel, different types of radioactive waste are generated. Since the materials used in reactor core region exposed to high concentration of neutrons, they exhibit higher level of surface dose rate and specific activity. And they are usually stored in spent fuel pool with spent fuel. Various non-fuel radioactive wastes are stored in spent fuel pool, which are skeleton, control rod assembly, burnable neutron absorber, neutron source, in core detector, etc. The skeleton is composed of stainless 304 and Inconel-718. There are two types of control rod assembly, that are WH type and OPR type. The WH type control rod is composed of Ag-In-Cd composites. The OPR type control rod is composed of B4C and Inconel-625. In this paper, the characteristics and storage status of the non-fuel radioactive waste will be reported. Also, the management strategy for the various non-fuel radioactive waste will be discussed.

The segmentation of activated components is considered as a one of the most important processes in decommissioning. The activated components, such as reactor vessel and reactor vessel internals, are exposed to neutron from the nuclear fuel and classified to intermediate, low, and very low-level wastes. As it is expected, the components, which are closed to nuclear fuel, exhibit higher degree of specific activity. After the materials were exposed to neutrons, their original elements transform to other nuclides. The primary nuclides in activated stainless steel are 55Fe, 63,59Ni, 60Co, 54Mn, etc. The previous study indicates that the specific activity of individual nuclide is strongly depends on the material compositions and impurities of the original materials. The 59Co is the one of the most important impurities in stainless steel and carbon steel. In this paper, the relationship between individual nuclides in activation analysis of activated components was studied. The systematic study on specific activity of primary nuclides will be discussed in this paper to understand the activation tendency of the components.

Dry active waste (DAW) contains substantial amount of cellulose related materials. The DAW are usually classified as low and/or very low-level waste. In Korea, three types of disposal facilities have been considered: silo, engineering barrier, and land-fill. Currently, only the silo type disposal facility is in operation. Around 27 thousand drums were disposed in silo. Massive amount of cement concrete is used in construction of silo. The ground waste, which flow through the concrete structure, shows higher pH than as it is. It is generally known that the pH of silo is ~12.47 in Korea, when considering construction material, filling material, and property of ground water. It is expected that the cellulose in DAW will be partially transformed to isosaccharinic acid (ISA). It is generally accepted that the ISA plays a negative role in safety analysis of disposal facility by stimulation of specific nuclides. Various factors affect the degradation of cellulose containing radioactive waste, such as degree of polymerization, pH of disposal condition, interaction between concrete structure and ground water, etc. In this paper, the disposal safety analysis of cellulose containing radioactive, usually paper, cotton, wood, etc., are studied. The degradation of cellulose with respect to degree of polymerization, pH of neighboring water, filling material of silo, etc. are reviewed. Based on the review results, it is reasonable to conclude that the substantial amount of DAW could be disposed in silo.

Expression changes of stress-induced peroxidase (swpa2 and swpa4) and storage root-specific sporamin (spo-A and spo-B) genes were examined using qRT-PCR after treatment with wounding and bacterial pathogens on leaves of sweetpotato (Ipomoea batatas) plants. As a result of examining the expression change in the wounding treatment condition for 48 hours after treatment, which is a representative physical stress, the expression of all genes increased after 12 hours of wounding treatment, but the expression pattern of each gene group showed distinct differences thereafter. Expression levels of swpa2 and swpa4 strongly increased up to 36 or 48 hours after wounding treatment, whereas spo-A and spo-B expression levels strongly decreased after 24 or 36 hours after wounding treatment. Peroxidase and sporamin genes are involved in the early response after wounding treatment and, in particular, the peroxidase swpa2 and swpa4 genes are also involved in the late response after wounding treatment. Gene expression analysis after infection with P. chrysanthemi, which causes softness in sweetpotato, showed that the swpa2 and swpa4 genes were weakly induced after 8 hours and then strongly induced after 20 hours during pathogen infection. Expression of the spo-A gene was weakly induced in the pathogen-treated group after 20 hours, whereas spo-B showed an expression pattern similar to that of the peroxidase genes. The above results indicate that expression of the stress-induced peroxidase gene used in this study is induced not only by abiotic stress but also by biological stress caused by bacterial pathogen invasion and that peroxidase plays an important function in the initial defense response.

In Korea, Starting with the permanent shutdown of Kori Unit1, decommissioning of commercial nuclear power plant is underway. Although various technologies are required to decommissioning a nuclear power plant, the most important technology is the characterization of radioactive waste. In particular, it is possible to establish an accurate decommissioning plan and estimate cost for radioactive waste through accurate characterization of reactor vessel (RV), reactor vessel internal (RVI) and bioshield, which are highly activated waste. In Slovakia’s V1 nuclear power plant, two units were shutdown in 2006 and 2008, respectively, and decommissioning license was approved in July 2011. Before approving the decommissioning license, the decommissioning database project was carried out from 2008 to 2011. At this time, radioactive evaluation was performed through sampling and radiological analysis of radioactive structures.

A pregnancy diagnosis is an important standard for control of livestock’s reproduction in paricular dairy cattle. High reproductive performance in dairy animals is a essential condition to realize of high life-time production. Pregnancy diagnosis is crucial to shortening the calving interval by enabling the farmer to identify open animals so as to treat or re-breed them at the earliest opportunity. MicroRNAs are short RNA molecules which are critically involved in regulating gene expression during both health and disease. This study is sought to establish the feasible of circulating miRNAs as biomarkers of early pregnancy in cattle. We applied Illumina small-RNA sequencing to profile miRNAs in plasma samples collected from 12 non-pregnant cows (“open” cows: samples were collected before insemination (non-pregnant state) and after pregnancy check at the indicated time points) on weeks 0, 4, 8, 12 and 16. Using small RNA sequencing we identified a total of 115 miRNAs that were differentially expressed weeks 16 relative to non-pregnancy (“open” cows). Weeks 8, 12 and 16 of pregnancy commonly showed a distinct increase in circulating levels of miR-221 and miR-320a. Through genome-wide analyses we have successfully profiled plasma miRNA populations associated with pregnancy in cattle. Their application in the field of reproductive biology has opened up opportunities for research communities to look for pregnancy biomarker molecules in dairy cattle.